• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.61-68
• /
• 2018

Recently, concentration of fine and ultra-fine particulate matter(PM) has been increased in KOREA. The increase of PM in KOREA is due to increase of domestic industries and yellow dust from china. PM is known to cause diseases such as dyspnoea, asthma, arrhythmia. Since PM is harmful to human, KOREA Ministry of Environment(ME) warns people to stay indoors when the outdoor PM concentration is high. However, prior studies has shown that indoor PM concentration can be relatively high when outdoor PM concentration is high due to infiltration of PM into buildings though leakage areas. In this study, airtightness, indoor and outdoor pressure difference and PM 2.5 & 10 concentration were measured in an apartment complex to observe PM infiltrating into building. Field measurement was conducted in newly-built apartment buildings to avoid the influence of indoor PM which can be generated by residents. The airtightness test was conducted to identify the leakage areas of the apartment, such as electric outlets and supply/exhaust diffusers. The airtightness test result showed that the air leakage area of the building was dominant in buildings envelop. According to indoor and outdoor pressure difference measurement result and PM concentration measurement result, it can be concluded that outdoor PM can infiltrate into indoor by leakage areas when wind is blown toward the apartment. As a result, pressure difference formed by the external weather condition and architectural characteristics such as the airtightness in building can influence PM to infiltrate into buildings. In further studies, I/O ratio, stack-effect, infiltration and penetration factor will be considered.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.394-405
• /
• 2020

To assess the station-keeping performance of floating structures in the Arctic region, the ice load should be considered along with other environmental loads induced by waves, wind, and currents. However, present methods for performance evaluation in the time domain are not effective in terms of time and cost. An ice load generation module is proposed based on the experimental data measured at the KRISO ice model basin. The developed module was applied to a time domain simulation. Using the results of a captive model test conducted in multiple directions, the statistical characteristics of ice loads were analyzed and processed so that an ice load corresponding to an arbitrary angle of the structure could be generated. The developed module is connected to commercial dynamic analysis software (OrcaFlex) as an external force input. Station-keeping simulation in the time domain was conducted for the same floating structure used in the model test. The mooring system was modeled and included to reflect the designed operation scenario. Simulation results show the effectiveness of the proposed ice generation module and its application to station-keeping performance evaluation. Considering the generated ice load, the designed structure can maintain a heading angle relative to ice up to 4°. Station-keeping performance is enhanced as the heading angle conforms to the drift direction. It is expected that the developed module will be used as a platform to verify station-keeping algorithms for Arctic floating structures with a dynamic positioning system.

• Atmosphere
• /
• v.32 no.4
• /
• pp.381-394
• /
• 2022

The Korea Meteorological Administration (KMA) National Typhoon Center has been officially releasing reanalyzed best tracks for the previous year's northwest Pacific typhoons since 2015. However, while most typhoon researchers are aware of the data released by other institutions, such as the Joint Typhoon Warning Center (JTWC) and the Regional Specialized Meteorological Center (RSMC) Tokyo, they are often unfamiliar with the KMA products. In this technical note, we describe the best track data released by KMA, and the algorithms that are used to generate it. We hope that this will increase the usefulness of the data to typhoon researchers, and help raise awareness of the product. The best track reanalysis process is initiated when the necessary database of observations-which includes satellite, synoptic, ocean, and radar observations-has become complete for the required year. Three categories of best track information-position (track), intensity (maximum sustained winds and central pressure), and size (radii of high-wind areas)-are estimated based on scientific processes. These estimates are then examined by typhoon forecasters and other internal and external experts, and issued as an official product when final approval has been given.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.41-49
• /
• 2021

This study was to solve the lift problem of the existing unit curtain wall type by using the vertical material mullion as a rail in curtain wall, which is recently used as an external finishing material for high-rise buildings. It has been shown that the application of the curtain wall mullion's rail can be quantified even at 20m/sec wind speed through the Mock-Up test. Based on the sites selected for comparison of construction methods, it was analyzed that the construction period could be shortened by 48 days, or about 20 percent. It was analyzed that the number of construction workers could be reduced by about 33 percent from the previous nine to six. Based on these results, assuming the installation of curtain wall units of 10,000㎡, it is judged that construction cost can be reduced by 80% or more.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.493-510
• /
• 2021

Mineral wool is an insulation material commonly used in passive fire protection (PFP) systems on offshore installations. Insulation materials have only been considered functional materials for thermal analysis in the conventional offshore PFP system design method. Hence, the structural performance of insulation has yet to be considered in the design of PFP systems. However, the structural elements of offshore PFP systems are often designed with excessive dimensions to satisfy structural requirements under external loads such as wind, fire and explosive pressure. To verify the structural contribution of insulation material, it was considered a structural material in this study. A series of material tensile tests was undertaken with two types of mineral wool at room temperature and at elevated temperatures for fire conditions. The mechanical properties were then verified with modified methods, and a database was constructed for application in a series of nonlinear structural and thermal finite-element analyses of an offshore bulkhead-type PFP system. Numerical analyses were performed with a conventional model without insulation and with a new suggested model with insulation. These analyses showed the structural contribution of the insulation in the structural behaviour of the PFP panel. The results suggest the need to consider the structural strength of the insulation material in PFP systems during the structural design step for offshore installations.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.919-925
• /
• 2023

Modern drones are equipped with miniaturized mission equipment capable of performing various tasks such as surveillance and reconnaissance. Consequently, these mission equipment are exposed to disturbances like wind loads and motor rotations, which can lead to instability in the operation of the Electro-Optical Targeting System (EOTS). Specifically, simple step inputs for changing the line of sight in EOTS can cause abrupt changes in speed, inducing overshoot and potentially creating instability along with other disturbances. To address this, a velocity profile was designed so that the angular velocity moves in a trapezoidal shape when changing the EOTS line of sight. A Double-loop controller was designed to apply this profile as an input to the external loop receiving position feedback. The system's stability was then compared, and the velocity profile was optimized within a stable range by varying maximum speed and acceleration.

• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.49-105
• /
• 2007

Objectives : Select and analyze the case record of dyspnea and wheezing asthma recorded in Xu Ming Yi Lei An that is the most abundant and wide in contents in existing case records that are systematic, comprehending relatively modern Traditional Chinese Medicine to secure more deep and objective basis of Traditional Chinese Medicine approach for dyspnea and wheezing asthma to analyze and review possibility for clinical application in this study. Methods: The study was conducted with the case records of dyspnea and wheezing asthma in whole Xu Ming Yi Lei An. Pattern identify and classify selected case records and again classified with deficiency syndrome and excess syndrome. Also analyzed prescriptions and herbs used in the case records. Nature of herbs and properties and flavors that were used in the case records were classified and frequency of each nature of herbs were analyzed. Applicable case records were interpreted and suggested prescriptions, pulse feelings, pattern classification were analyzed and described. Results : Among the 5254 case records stated on the complete collection, it is researched that there are 63 case records for the symptom complex of dyspnea as 1.2% of the whole case records, and the case records on the symptom complex of wheezing asthma are 14 as the 0.27% of the total examples. 63 case record examples related with symptom complex of dyspnea were pattern identified and classified. As a result, deficiency syndrome of the Kidney(33 %), deficiency syndrome of the Spleen(26.0%), Wind-Cold(12.3%), phlegm turbidity(12.3%), Heat in the Lung(8.2%), asthenia of the Lung(8.2%) were investigated as above order. 14 case record examples related with wheezing asthma were pattern identified and classified. As a result, phlegm-Heat(26.3%), upper excess and lower deficiency(26.3%), external affections Wind-Cold(15.8%), Dampness-phlegm(10.5%), Lung asthenia(10.5%), Cold phlegm(5.3%), mutual deficiency and detriment of Heart and Kidneys(5.3%) were investigated as above order. Symptom complex of dyspnea has 67.1% of deficiency syndrome, 32.9% of excess syndrome resulting more deficiency syndrome than excess syndrome. Symptom complex of wheezing asthma has 42.1 % of deficiency syndrome and 57.9% of excess syndrome resulting more excess syndrome than deficiency syndrome. In case of symptom complex of dyspnea prescription used in the case record, the order of frequency is as following. Palmijihwang-tang, Bojung-ikgitang, Yungmijihwang-tang, Ijintang, Sojaganggitang, Igongsan. In case of symptom complex of wheezing asthma prescription in the case record, Yungmijihwang-tang, Ohotang, Dodamtang were mostly used. Herbs used in case records of symptom complex of dyspnea are Ginseng Radix, Poria, Glycyrrhizae Radix, Aconiti Iateralis Preparata Radix, Atractylodis Macrocephalae Rhizoma, Dioscoreae Rhizoma, Angelicae Gigantis Radix, Rehmanniae Radix Preparat, Pinelliae Rhizoma, Zingiberis Rhizoma Recens are mostly used. Nature of herb properties used for symptom complex of dyspnea and symptom complex of wheezing asthma are herbs that are warm properties. When the symptom complex of dyspnea and the symptom complex of wheezing asthma were treated. if the patient felt tenderness at Pyesu, doctors conducted pricking blood around the opposite Pyesu or Sipseon acupoint. when the patient didn't have tenderness at Pyesu by soft press, pricking blood was performed both sidees, right and left Pyesu. In case of the treatment of symptom complex of dyspnea and symptom complex of wheezing asthma, when they got treatment, when the symptom complex of disease is severe, a doctor cauterized the opposite Pyesu while the other Pyesu felt tenderness, and decided how the above treatment is performed whether the degree of the symptom compolex of disease is severe or not. In case of the treatment of symptom complex of dyspnea and symptom complex of wheezing asthma, if the person felt tenderness at Pyesu and is caught by the Wind-Cold pathogen, slight acupuncture is treated at relevant Pyesu with Fire needling. When patient with symptom complex of dyspnea and symptom complex of wheezing asthma cannot hawk sputum up from the oral and laryngopharynx, suction method is treated. Conclusion : With this study, actual traditional and clinical pattern identification form and characteristics of symptom complex of dyspnea and symptom complex of wheezing asthma were recognized. Modern case report utilizing in clinical application need to be secured and an incurable disease asthma need to be diagnosed and improvement for treatments have to be searched through other case records.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.113-122
• /
• 2013

In this study, the traditional structure of the impact on the stability analysis. Korean traditional landscape architecture column space of stonework stable composition as the foundation of the fence for a long time been known to fall down and not maintained. The destination of research Ohgokmun Damyang Soswaewon fence which is in harmony with nature is one of the traditional structures that affect its shape without being kept so far came true. This includes our ancestral wisdom and that wisdom can guess guesswork. But I let the traditional reproduction incidence structures frequently. This deviation from the traditional method of construction application of shorthand stand. Thus, the subject of this study, the factors that do not fall down fences Ohgokmun solution is to indirectly gain the weak. In addition, epidemiological studies and the methods of calculation of the inferred physical examination, the results of the analysis were derived through the following. First, the internal factors of the fence Ohgokmun constituting the structural member and the coupling of the scheme. 1) based on stable ground. Greater role in the country rock The fact that the settlement will have no symptoms. 2) to minimize the friction caused by hydrological water to remove the two-pronged process through stone work building form and menu sustaining power in hydrology and flooding made against the bypass channel. 3) due to the load bearing capacity and durability to withstand the strength of the material and the construction of structures in the form of a dispersion of power between each individual to maximize the process of getting traction was applied. Second, external factors Ohgokmun fence the results obtained through the calculation of the dynamics of repair, is greatly affected by the wind and the water gate of the fence, but the action of the structural stability of the lack of power that hurt enough conclusion. In this study, the results of the structure of internal and external influence as well through the structure can be viewed as composed consisting. However, over the next follow-up in terms of climate and environmental factors due to the fact that the fall might.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.111-118
• /
• 2013

This paper suggested the improvement of marine environmental impact assessment in eastern coast as analyzing consultation on the coastal area utilization for development of ports and fishing harbors for 3years in the east coast. The results of survey are only 3cases, 12cases and 16cases each for ocean currents, wave and sounding data. However, for development of ports and fishing harbors in eastern coast, ocean characteristics in eastern coast different than in the West Sea, South Sea is considered to marine environmental impact assessment. For development of ports and fishing harbors in east coast where the influences of ocean currents, wind-driven current and waves are dominant, the effect of the current should be considered to improve the reproducibility of tidal current. The wave should also be considered as an assessment criteria to obtain the validity of project such as harbor tranquility, functionality of breakwaters and stability. In addition, sediment inflow in river and exact water depth data of the ocean should be applied to numerical modeling and set wave-induced current to external force of sediment transport to predict the problems such as the harbor siltation and the coastal erosion considering ocean characteristics in the east coast.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.453-466
• /
• 2008

In order to examine the generation mechanism of long ocean waves along the west coast of Korea and to understand the amplification process of the long ocean waves, sea level, atmospheric pressure and wind data observed every minute from 2007 March 29 to 2007 April 1 were analyzed and onedimensional numerical ocean model experiments were performed. An atmospheric pressure jump propagated southeastward from Backryungdo to Yeonggwang along the west coast of Korea with speed of $13{\sim}27\;m/s$ between 2007 March 30 23:00 and 2007 April 1 1:30. Average magnitude of pressure jump was 4.2 hPa. As a moving atmospheric jump propagated from north to south along the coast, long ocean waves were generated and the sea level abnormally rose or fell at Anheung, Kunsan, Wido and Yeonggwang. Average amplitude of sea level rise (or fall) was about 113.6 cm. In a one-dimensional numerical ocean model, nonlinear shallow water equations were numerically integrated and a moving atmospheric pressure jump with traveling speed of 24 m/s was used as an external force. While the atmospheric pressure jump travels over 60 m depth ocean, a long ocean wave is generated. Because the propagation speed of the atmospheric jump is almost equal to that of the long ocean wave, Proudman resonance occurs and the long ocean wave amplifies. As the atmospheric pressure jump moves into the coastal area shallower than 60 m, the speed of the long ocean wave decreases and Proudman resonance effect decreases. However, the amplitude of the long ocean wave increases and wave length becomes shorter because of shoaling effect. When the long ocean wave hits the land boundary, amplitude of the long ocean wave drastically amplifies due to reflection. Data analysis and numerical experiments suggest that the southeastward propagation of an atmospheric pressure jump over the shallow ocean, which is a necessary condition for Proudaman resonance, generated the long ocean waves along the west coast of Korea on 2007 March 31 and the ocean waves amplified due to shoaling effect in the coastal area and reflection at the shore.