• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.6
• /
• pp.531-548
• /
• 2006

The purpose of this study was to investigate the biomechanical, histologic findings of distracted regenerate and TMJ response in modified distraction osteogenesis (DO) technique combined with compression force as biomechanical stimulation method which has been suggested in 2002, and developed thereafter by authors. This study was performed with two experiments. First experiment was designed to explore the optimal ratio of compression force versus distraction force for the new DO technique. Second experiment was planned to evaluate the reaction of TMJ tissue, especially condyle, disc after application of the DO technique with compression force. Total 52 New Zealand adult male-rabbits with 3.0kg body weight were used for the study. For the first study, 30 adult male-rabbits underwent osteotomy at one side of mandibular body and a external distraction device was applied on each rabbit with same manner. In the control group of 10 rabbits, final 8 mm of distraction with 1 mm rate per day was done with conventional DO technique after 5 latency days. For the experimental group of 20 rabbits, a compression force with 1 mm rate per day was added to the distracted mandible on 3-latency day after over-distraction (over-lengthening). As the amount of the rate of compression versus distraction, experimental subgroup I (10 rabbits) was set up as 2 mm compression versus 10 mm distraction (1/5) and experimental subgroup II (10 rabbits) was set up as 3 mm compression versus 11 mm distraction (about 1/3). All 30 rabbits were set up to obtain final 8 mm distraction and sacrificed on postoperative 55 day to analysis on biomechanical, and histologic findings of the bone regenerates. For second study, 22 adult male-rabbits were used to evaluate TMJ response after the DO method application with compression force. In the control group, 10 rabbits was used to be performed with conventional DO method, on the other hand, in a experimental group of 10 rabbits, 10 mm distraction with 2 mm compression (1/5 ratio) was done. The remaining 2 rabbits served as the normal control group. Histomorphologic examinations on both condyle, histological studies on condyle, disc were done at 1, 2, 3, 4, 7 weeks after distraction force application. The results were as follows: 1. On the bone density findings, the experimental group II (force ratio - 1/3) showed higher bone density than the other experimental group (force ratio - 1/5) and control group (control group - $0,2906\;g/cm^2$, experimental group I - $0.2961\;g/cm^2$, experimental group II - $0.3328\;g/cm^2$). 2. In the histologic findings, more rapid bone maturation like as wide lamellar bone site, more trabeculae formation was observed in two experimental groups compared to the conventional DO control group. 3. In morphologic findings of condyle, there were no differences of size and architecture in the condyle in the control and experimental groups. 4. In histologic findings of condyles, there were thicker fiberous and proliferative layers in experimental group than those of control group until 2 weeks after distraction with compression force. But, no differences were seen between two groups on 3, 4, 7 weeks after compression. 5. In histologic findings of disc, more collagen contents in extracellular matrix, more regular fiber bundles, and less elastin fibers were seen in experimental group than control group until 2 weeks after distraction with compression. But, no differences were seen between two groups on 3, 4, 7 weeks after distraction with compression. From this study, we could identify that the new distraction osteogenesis technique with compression stimulation might improve the quality of bone regeneration. The no remarkable differences on TMJ response between control and experimental groups were seen and TMJ tissues were recovered similarly to normal TMJ condition after 3 weeks.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.1-15
• /
• 2005

Pathogens, insects and weeds have significantly reduced agricultural productivity. Thus, to increase the productivity, synthetic agricultural chemicals have been overused. However, these synthetic compounds that are different from natural products cannot be broken down easily in natural systems, causing the destruction of soil quality and agricultural environments and the gradually difficulty in continuous agriculture. Now agriculture is faced with the various problems of minimizing the damage in agricultural environments, securing the safety of human health, while simultaneously increasing agricultural productivity. Meanwhile, plants produce secondary metabolites to protect themselves from external invaders and to secure their region for survival. Plants infected with pathogens produce antibiotics phytoalexin; monocotyledonous plants produce flavonoids and diterpenoids phytoalexins, and dicotylodoneous plant, despite of infected pathogens, produce family-specific phytoalexin such as flavonoids in Leguminosae, indole derivatives in Cruciferae, sesquitepenoids in Solanaceae, coumarins in Umbelliferae, making the plant resistant to specific pathogen. Growth inhibitor or antifeedant substances to insects are terpenoids pyrethrin, azadirachtin, limonin, cedrelanoid, toosendanin and fraxinellone/dictamnine, and terpenoid-alkaloid mixed compounds sesquiterpene pyridine and norditerpenoids, and azepine-, amide-, loline-, stemofoline-, pyrrolizidine-alkaloids and so on. Also plants produces the substances to inhibit other plant growths to secure the regions for plant itself, which is including terpenoids essential oil and sesquiterpene lactone, and additionally, benzoxazinoids, glucosinolate, quassinoid, cyanogenic glycoside, saponin, sorgolennone, juglone and lots of other different of secondary metabolites. Hence, phytoalexin, an antibiotic compound produced by plants infected with pathogens, can be employed for pathogen control. Terpenoids and alkaloids inhibiting insect growth can be utilized for insect control. Allelochemicals, a compound released from a certain plant to hinder the growth of other plants for their survival, can be also used directly as a herbicides for weed control as well. Therefore, the use of the natural secondary metabolites for pest control might be one of the alternatives for environmentally friendly agriculture. However, the natural substances are destroyed easily causing low the pest-control efficacy, and also there is the limitation to producing the substances using plant cell. In the future, effects should be made to try to find the secondary metabolites with good pest-control effect and no harmful to human health. Also the biosynthetic pathways of secondary metabolites have to be elucidated continuously, and the metabolic engineering should be applied to improve transgenics having the resistance to specific pest.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.15-24
• /
• 2011

Modern enterprises should concentrate their efforts on continuous improvements in focusing their development in the core areas of business and to reduce their expenses and to enhance the quality of service for customers. The enterprises should focus on their core business while outsourcing the non-core areas of business to external specialists for the purpose of reducing cost. In South Korea, the enterprises are becoming increasingly interested in outsourcing their logistics function, especially in using IT technologies to the 3PL. The underlying reason for this trend is because the logistics costs of Korean businesses are much higher than that of other advanced countries. This higher logistic costs weakens the price competitiveness of Korean companies in the overseas export markets and even dampening the balance of international trade. Domestically, the higher logistics costs have the effect of raising prices in the local markets and thus affecting the local economy. Therefore a solution is urgently needed to save the logistics costs for the Korean companies in the interest of increasing national competitiveness. Outsourcing to the 3PL is becoming an attraction solution to this problem. Thanks to the increasing supply of professional logistics companies, many of the enterprises are switching to the Third Party Logistics. Nevertheless the enterprises do not yet utilize the integrated third-party logistics services on a full scale. This study analyzes present conditions and problems of the domestic third-party logistics market and suggests directions for future development. To solve the problems in the domestic third-party logistics market, four actions are recommended. First there should be new supporting policies in the laws and regulations and a system for small and medium sized companies to grow. Solutions to structural problems such as abnormal multilevel merchandising, illegal operation of private cars, and freight dumping should be implemented concurrently. Furthermore, standards for new companies entry into the market should be enhanced to allow only the competitive distribution companies to enter the market. Second, development of variety of educational programs is needed through establishing human-resource development system and specialized formal educational institution focused on this market. Third, the third party distribution companies, which seek long-term relationships with the owners of goods, should endeavor to strengthen their communications capability. Fourth, adoption of high-tech distribution system and the advent of U-Logistics, making use of RFID is urgent. This study has the limitation of objectivity because it does not include various comparative case studies about companies relating to the Third Party Logistics and domestic franchise companies. However, this study is significant to the extent that it analyzes the general present conditions and the problems of domestic Third Party Logistics and suggests recommendations for revitalization of Third Party Logistics. For future studies, analyzing the successful cases of international third party logistics companies' empirical data and studying the application into domestic franchise companies would improve the objectivity of the results. This would assist the domestic third party logistics companies not only to perform excellent domestic logistics function but also to enter into the global market for international logistics.

• Journal of Intelligence and Information Systems
• /
• v.18 no.4
• /
• pp.43-57
• /
• 2012

To enhance the competitive advantage in a constantly changing business environment, an enterprise management must make the right decision in many business activities based on both internal and external information. Thus, providing accurate information plays a prominent role in management's decision making. Intuitively, historical data can provide a feasible estimate through the forecasting models. Therefore, if the service department can estimate the service quantity for the next period, the service department can then effectively control the inventory of service related resources such as human, parts, and other facilities. In addition, the production department can make load map for improving its product quality. Therefore, obtaining an accurate service forecast most likely appears to be critical to manufacturing companies. Numerous investigations addressing this problem have generally employed statistical methods, such as regression or autoregressive and moving average simulation. However, these methods are only efficient for data with are seasonal or cyclical. If the data are influenced by the special characteristics of product, they are not feasible. In our research, we propose a forecasting framework that predicts service demand of manufacturing organization by combining Case-based reasoning (CBR) and leveraging an unsupervised artificial neural network based clustering analysis (i.e., Self-Organizing Maps; SOM). We believe that this is one of the first attempts at applying unsupervised artificial neural network-based machine-learning techniques in the service forecasting domain. Our proposed approach has several appealing features : (1) We applied CBR and SOM in a new forecasting domain such as service demand forecasting. (2) We proposed our combined approach between CBR and SOM in order to overcome limitations of traditional statistical forecasting methods and We have developed a service forecasting tool based on the proposed approach using an unsupervised artificial neural network and Case-based reasoning. In this research, we conducted an empirical study on a real digital TV manufacturer (i.e., Company A). In addition, we have empirically evaluated the proposed approach and tool using real sales and service related data from digital TV manufacturer. In our empirical experiments, we intend to explore the performance of our proposed service forecasting framework when compared to the performances predicted by other two service forecasting methods; one is traditional CBR based forecasting model and the other is the existing service forecasting model used by Company A. We ran each service forecasting 144 times; each time, input data were randomly sampled for each service forecasting framework. To evaluate accuracy of forecasting results, we used Mean Absolute Percentage Error (MAPE) as primary performance measure in our experiments. We conducted one-way ANOVA test with the 144 measurements of MAPE for three different service forecasting approaches. For example, the F-ratio of MAPE for three different service forecasting approaches is 67.25 and the p-value is 0.000. This means that the difference between the MAPE of the three different service forecasting approaches is significant at the level of 0.000. Since there is a significant difference among the different service forecasting approaches, we conducted Tukey's HSD post hoc test to determine exactly which means of MAPE are significantly different from which other ones. In terms of MAPE, Tukey's HSD post hoc test grouped the three different service forecasting approaches into three different subsets in the following order: our proposed approach > traditional CBR-based service forecasting approach > the existing forecasting approach used by Company A. Consequently, our empirical experiments show that our proposed approach outperformed the traditional CBR based forecasting model and the existing service forecasting model used by Company A. The rest of this paper is organized as follows. Section 2 provides some research background information such as summary of CBR and SOM. Section 3 presents a hybrid service forecasting framework based on Case-based Reasoning and Self-Organizing Maps, while the empirical evaluation results are summarized in Section 4. Conclusion and future research directions are finally discussed in Section 5.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.417-428
• /
• 2005

Today, IT organizations perform projects with vision related to marketing and financial profit. The objective of realizing the vision is to improve the project performing ability in terms of QCD. Organizations have made a lot of efforts to achieve this objective through process improvement. Large companies such as IBM, Ford, and GE have made over $80\%$ of success through business process re-engineering using information technology instead of business improvement effect by computers. It is important to collect, analyze and manage the data on performed projects to achieve the objective, but quantitative measurement is difficult as software is invisible and the effect and efficiency caused by process change are not visibly identified. Therefore, it is not easy to extract the strategy of improvement. This paper measures and analyzes the project performance, focusing on organizations' external effectiveness and internal efficiency (Qualify, Delivery, Cycle time, and Waste). Based on the measured project performance scores, an OT (Opportunity Tree) model was designed for optimizing the project performance. The process of design is as follows. First, meta data are derived from projects and analyzed by quantitative GQM(Goal-Question-Metric) questionnaire. Then, the project performance model is designed with the data obtained from the quantitative GQM questionnaire and organization's performance score for each area is calculated. The value is revised by integrating the measured scores by area vision weights from all stakeholders (CEO, middle-class managers, developer, investor, and custom). Through this, routes for improvement are presented and an optimized improvement method is suggested. Existing methods to improve software process have been highly effective in division of processes' but somewhat unsatisfactory in structural function to develop and systemically manage strategies by applying the processes to Projects. The proposed OT model provides a solution to this problem. The OT model is useful to provide an optimal improvement method in line with organization's goals and can reduce risks which may occur in the course of improving process if it is applied with proposed methods. In addition, satisfaction about the improvement strategy can be improved by obtaining input about vision weight from all stakeholders through the qualitative questionnaire and by reflecting it to the calculation. The OT is also useful to optimize the expansion of market and financial performance by controlling the ability of Quality, Delivery, Cycle time, and Waste.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.139-159
• /
• 1996

This study comparatively examines a causal model of employee attatchment which focuses on employee's organizational commitment and intent to stay with an organization. This study is based on two separate studies of employee attachment among teachers : the U.S. case of the Chicago Public Schools (CPS) and the South Korean case of the Seoul Educational District (SED). The main purpose of this study is to replicate in Korea the CPS study. A revised model based on the unique characteristics of Korean teachers is also developed and estimated. The Price Mueller model of employee attachment provides the basic theoretical framework for this study. It includes five general classes of variables : 1) employee responses to work variables : job satisfaction, commitment, and intent to stay; 2) psychological stress variables: role ambiguity, role conflict, work overload, and quality of students; 3) social structural variables: autonomy, routinization, distributive justice, and legitimacy; 4) economic structural variables: pay, job security, promotional opportunities, and job opportunities; and 5) work orientation variables : career commitment, normative commitment, work motivation, affectivity, work values, and met expectations. The data was collected through questionnaire survey and a sample of 649 secondary school teachers in Seoul, South Korea, was included in the final analysis. Covariance structure analysis (LISREL) was used to estimate the causal model. The results indicate that the endogenous variables of job satisfaction and commitment play a considerably less important role than in the U.S. model in mediating the effects of the exogenous variables on intent to stay, and the model fails to explain the majority of the variance in intent to stay. In addition, the new variables added to the revised Korean model do not bave significant effects on intent to stay. The structural characteristics of the employment relationship and labor markets associated with Korean teachers forced mobility and closed external markets - are largely accountable for the major differences between the Korean and the U.S. cases. The study suggests that conceptual and empirical work on what produces employee attachment under these structural constraints needs to receive more attention in future studies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.221-226
• /
• 2012

For the investigation of a possibility as a useful functional material, 6 cultivars (Takinosawa Gold, Kawanakawase Hakuto, Madoka, Yumefuji, Nagasawa Hakuho, Hong Bak) of Prunus persica L. Batsch were studied at unripe stage to determine the physicochemical properties and chemical compositions. The cultivars were picked in late May, and all samples were analyzed for external properties, physicochemical properties, pH, Brix value, Hunter's color value, hardness, vitamin C, and reducing sugar. The size of the fruit from all six cultivars was compared, and it was determined that cultivars, fruit from Madoka was the largest, while that from Yumefuji was the smallest. Comparing fresh weight, the fruit from Yumefuji was lowest in moisture contents (89.13~89.96%), and that from Nagasawa Hakuho had significantly higher crude protein (1.02~1.62%). The contents of crude lipids (0.18~0.23%) and carbohydrates (8.00~9.35%) were not significantly different between cultivars and Madoka included higher crude ash contents (0.32~0.69%) than other cultivars. The pH of 6 cultivars from unripe peaches were significantly higher from Kawanakawase Hakuto, and the Brix value was also highest from Kawanakawase Hakuto, followed by Yumefuji, Madoka, Nagasawa Hakuho, Takinosawa Gold, and Hong Bak. In chromaticity, the L value, the indicator of brightness, was significantly higher in fruit from Nagasawa Hakuho. The a value, the indicator of redness, was the highest with Hong Bak and overall lower than -5. The b value, the indicator of yellowness, was the highest in fruit from Madoka and ranged from 16.51 to 18.33. In physical characteristics, the hardness of the unripe peaches was the highest in fruit from Hong Bak, and overall, white peaches have a higher hardness value than yellow peaches. The vitamin C content of the fruit didn't show any significant differences between cultivars, and the reducing sugar showed a higher percent than 6.34% in fruit from all cultivars. These results suggest that unripe peaches were commensurate with the development of natural pigment and as a functional foods.

• Korean Journal of Poultry Science
• /
• v.33 no.4
• /
• pp.283-293
• /
• 2006

Two experiments were conducted to investigate the effects of dietary activated charcoal mixed with wood vinegar (AC) on broiler performance and antibiotics residue in eggs. In experiment 1, a total of low hundred fifty, 1-day-old male broile. chicks (Ross) were divided into 6 groups, consisting 3 replicates of 25 birds each, and 134 one of the six experimental diets: devoid of AC and antibiotics (negative control), devoid of AC with 0.1% antibiotics (positive control), devoid of antibiotics with 1% AC, with 0.1% antibiotics and 1% AC, devoid of antibiotics with 2% AC, with 0.1% antibiotics and 2% AC, for 5 wks. Feed consumption and body weights were measured weekly. At the end of the experiment, eight birds from each group were selected and sacrificed. The relative weight of organs and characteristics of breast muscle were investigated. There were no significant differences in feed intake, body weight gain and feed conversion rate among the treatments. There were also no significant differences in the relative weight of breast meat, leg and liver. The abdominal fat tended to be decreased by the dietary AC. Significant differences were shown (P<0.05) in meat redness (a) and yellowness (b) among the treatments. However, the sensual characteristics of breast muscle was not affected by the dietary treatments. There were significant differences in total microbes, Coli forms and lactic acid bacteria (P<0.05) among the treatments. In experiment 2, a total of ninety, 40-wk-old Hy-line Brown laying hens were divided into 3 groups, consisting 3 replicates of 10 birds each and fed medicated control diet devoid of AC or diets containing 1% AC and 2% AC for 2 wks. The residue of antibiotics in Plasma and egg Yolk were significantly decreased (P<0.05) in 2% AC group compared to that of control. This study suggest that dietary AC may improve the external quality of edible meat and reduced antibiotics residue in chicken eggs without affecting laying performance.