• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.523-533
• /
• 2015

A reactor containment acts as a final barrier to prevent leakage of radioactive material due to the possible reactor accidents into external environment. Because of the functional importance of the containment building, the SIT(Structural Integrity Test) for containments shall be performed to evaluate the structural acceptability and demonstrate the quality of construction. An initial numerical analysis was performed to simulate the results obtained from the SIT for a prestressed concrete(PSC) structure. But the analysis results by the initial model expected smaller displacements than the measured ones by 30% at some locations. Accordingly, the research and development to improve the initial model to corelate the measured results of the SIT more properly have been performed. In this paper, the effects of the loss of concrete due to duct for tendons and the contact of duct and tendons in un-bonded tendon system are mainly evaluated based on the preliminary analysis results. In addition, the importances of the proper definition of mesh connectivity among structural elements of concrete, liner plates, rebars and tendons are discussed.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Journal of Radiation Protection and Research
• /
• v.42 no.4
• /
• pp.197-204
• /
• 2017

Background: X-ray imaging detectors for the nondestructive cargo container inspection using MeV-energy X-rays should accurately portray the internal structure of the irradiated container. Internal and external factors can cause noise, affecting image quality, and scattered radiation is the greatest source of noise. To obtain a high-performance transmission image, the influence of scattered radiation must be minimized, and this can be accomplished through several methods. The scatter rejection method using an anti-scatter grid is the preferred method to reduce the impact of scattered radiation. In this paper, we present an evaluation the characteristics of the signal and noise according to physical and material changes in the anti-scatter grid of the imaging detector used in cargo container scanners. Materials and Methods: We evaluated the characteristics of the signal and noise according to changes in the grid ratio and the material of the anti-scatter grid in an X-ray image detector using MCNP6. The grid was composed of iron, lead, or tungsten, and the grid ratio was set to 2.5, 12.5, 25, or 37.5. X-ray spectrum sources for simulation were generated by 6- and 9-MeV electron impacts on the tungsten target using MCNP6. The object in the simulation was designed using metallic material of various thicknesses inside the steel container. Using the results of the computational simulation, we calculated the change in the scatter-to-primary ratio and the signal-to-noise ratio improvement factor according to the grid ratio and the grid material, respectively. Results and Discussion: Changing the grid ratios of the anti-scatter grid and the grid material decreased the scatter linearly, affecting the signal-to-noise ratio. Conclusion: The grid ratio and material of the anti-scatter grid affected the response characteristics of a container scanner using high-energy X-rays, but to a minimal extent; thus, it may not be practically effective to incorporate anti-scatter grids into container scanners.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.45-72
• /
• 2012

This work uses data associated with business activity and outcome on the five main SOGO-SHOSYA and considers meaning of its outcome and logistics function in energy business field in recent 10 years. The contents of this work embody three chapters, which are an investigation on advanced research, an analysis of SOGO-SHOSYA business outcome, logistics function in its energy business field, Research method are used by statistical analysis and organizational structure analysis as well as case study. We will search for the reason that the energy business has worked well lately. There are actively securing interests of energy exploitation and longer-term investment to affiliated companies, building supply chain system with internal and external businesses. Especially, we will account for the logistics role of SOGO-SHOSYA that has newly understood the international logistics function in energy business field. SOGO-SHOSYA has coordinated organizationally from upstream to downstream in energy business, is showing its abilities in midstream related features that involve investor, organizer and analyst. SOGO-SHOSYA's building up logistics function will help supply chain in energy business for rising the competitiveness of price and quality, and support cost-reducing in activities of supply chain.

• Journal of Korea Water Resources Association
• /
• v.48 no.6
• /
• pp.501-509
• /
• 2015

Lately multipurpose dam is required to consider various interests such as quality, ecological environment as well as flood control, water supply, hydropower generation, etc. The objective of this study is to investigation and analysis of water temperature in the areas where there are social conflicts due to cold water outflow. In this study, we monitored water temperature of Juam regulation dam, downstream river, Suncheon bay in a long term period and performed comparative analysis on a change of water temperature in downstream river and Suncheon bay by using three-dimensional numerical mode (EFDC) considering various external factors such as water outflow amount. The result of monitoring and numerical modelling indicates that effects of cold water outflow takes place from april to september. Also effects of the low temperature discharge of dam was complicatedly altered by various factors such as outflow time and amount, weather and tide level conditions etc. The result of this study can be utilized as a basic data for establishing improvement of dam operation plan to minimize negative effects of dam's cold temperature water outflow to downstream river and coastal area.

• Korean Journal of Plant Resources
• /
• v.22 no.6
• /
• pp.483-488
• /
• 2009

The main objective of this breeding program is to develop high yielding, disease resistance and good processing potato cultivar. 'Gui Valley' is a clonal selection resulting from a cross between 'ND2471-8' and 'Cona'. It has medium plant height and light green foliage. 'Gui Valley' has medium flowering habit and light pink flowers. 'Gui Valley' is a medium maturing potato cultivar and tubers are smooth, yellow skin, light yellow flesh, long-oval tuber shape, distinct red eyes with medium depth and medium dormancy. It has high level of tuber uniformity and good keeping quality. 'Gui Valley' demonstrates resistance to potato virus Y (PVY), soft rot, but moderately susceptible to late blight and common scab. It is also resistant to most of the internal and external physiological disorders particularly dehiscence, hollow heart and internal brown spot. The specific gravity of 'Gui Valley' is significantly higher (1.097) than that of 'Shepody' (1.078). 'Gui Valley' has suitable for processing mainly French fries and chips. This cultivar has high level of tuber uniformity and capable of yielding 37.6 $t{\cdot}ha^{-1}$, which is 18.2% higher than the control potato cultivar 'Shepody' under optimum agronomical practices.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.736-740
• /
• 2005

As an alternative of yeast, various concentrations to prepare hypo-allergenic bread (HAB). Addition of sodium bicarbonate increased $CO_2$ emission, but at higher than 2.0% caused bitter taste compared to other mixtures. Addition of sucrose significantly increased $CO_2$ emission. HABs 7 ($NaHCO_3$ 2.0g+sucrose 0.63 g) and 8 ($NaHCO_3$ 2.0g+sucrose 1.0g) showed higher grain and color scores. HAB 5 ($NaHCO_3$ 1.5g+sucrose 1.0g) and 6 ($NaHCO_3$ 1.5g+sucrose 2.0g) gave higher aroma and taste scores. HAB 5 showed significantly higher overall acceptability (p<0.05) score than others, whereas HABs 7 and 8, regardless of high external sensory qualities, showed lower overall acceptabilities than HAB 5 due to bitter taste. Prototypical HAB was obtained using wheat flour (100g) and water (62mL) incubated at $37^{\circ}C$ for 4 hr for treatment of b.p pretense (100mg) before adding sodium bicarbonate (1.5%), sucrose (1.0%), NaCl (1.0%), and citric acid (1.0%).

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.23-30
• /
• 2014

Overseas construction orders of domestic companies had been increased significantly in a short period from $10.9 billion in 2005 to $64.9 billion in 2012. However experts are concerned that quality of growth will not support quantitative growth. This study suggest concentrate competencies for not only winning in bid but also successful execution of domestic companies. 4 Steps which are Pre-Marketing, Bid-Preparation, Bidding, Contract Phase are defined for competency assessment. After drawing specific tasks by phase, survey asking importance and capability of the tasks to the person in charge of bidding and site was conducted by utilizing Likert 7 point scale. According to the result of IPA analysis, domestic construction companies need to ensure internal competencies; Project risk review, Bid team organization, and external competencies; Client needs grasp, Localization strategy, Cooperation establishment. Hearafter domestic construction companies will be able to utilize the result of the study for setting bidding strategy for winning in bid and improving earning rate.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.477-486
• /
• 1998

In this paper, we implemented the urine analysis system capable of measuring a qualitative and semi-quantitative and assay using strip. The analysis algorithm of urine analysis was adopted a fuzzy logic-based classifiers that was robust to external error factors such as temperature and electric power noises. The spectroscopic properties of 9 pads In a strip were studied to developing the urine analysis system was designed for robustnesss and stability. The urine analysis system was consisted of hardware and software. The hardware of the urine analysis system was based on one-chip microprocessor, and Its peripherals which composed of optic modulo, tray control, preamplifier, communication with PC, thermal printer and operating status indicator. The software of the urine analysis system was composed of system program and classification program. The system program did duty fort system control, data acquisition and data analysis. The classification program was composed of fuzzy inference engine and membership function generator. The membership function generator made triangular membership functions by statical method for quality control. Resulted data was transferred through serial cable to PC. The transferred data was arranged and saved be data acquisition program coded by C+ + language. The precision of urine analysis system and the stability of fuzzy classifier were evaluated by testing the standard urine samples. Experimental results showed a good stability states and a exact classification.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.123-141
• /
• 2019

The purpose of this study is to provide basic data that can be used for the development of technology textbooks of Nigeria-Korea Model School by analyzing external and internal aspects of Illustration in Nigerian primary school technology textbooks, and 10 textbooks used in Nigeria were analyzed. Based on the results of the study, the conclusions are as follows. First, the form of the visual data should be diversified into a picture, a cartoon, a diagram, and a diagram from the photograph center, and provide various information closely related to the contents of the technology. Second, it is necessary to increase the size of illustration so as to induce learners to be motivated, and to enhance the effect of editing. Third, currently, partial enlargement data is rarely used, but visual material should be partially enlarged in order to express a detail part of product. Fourth, diversity of editing should be done by using circular or background omission rather than using only rectangle uniformly in visual material. Fifth, in terms of gender equality, it is necessary to deviate from male-centric visual materials and edit them with consideration for women. Sixth, in order to provide learner-centered textbooks, the role of visual materials should be extended to 'inducement of motivation', 'activity guidance', and 'activity result' in addition to 'providing data'. Finally, in terms of the function of visuals, the quality of textbooks should be upgraded by utilizing auxiliary and decorative functions in addition to essential functions.