• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.88-89
• /
• 2002

Studies on drug delivery using nano-size particles of magnetic fluid and hyperthermia have been performed by some researchers [1] because interests in human health increased according to industry development. However, there are few studies on systems which can accurately control delivery of the magnetic fluids to a diseased part of body [2]. In this study, Cu-added magnetic ferrofluid was prepared and the external magnetic field system was designed for drug localization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.5
• /
• pp.660-666
• /
• 2023

This study aimed to examine the effect of external pop-up satellite archival tags (PSATs) attachment and water temperature on the oxygen consumption rate (OCR) of the olive flounder (mean body weight 2281.7 g). The OCRs of fish were measured under conditions of three different water temperature conditions (15, 20, and 25℃) and two different tagging methods [non-tagging, control; bio-logger external attachment with a miniature PSAT (dummy mrPAT), BEA] using a closed flow-through respirometer. The OCRs of fish linearly increased with the increase in water temperature in both the control and BEA (P<0.001); however, the OCRs of BEA were approximately 1.8-1.9 times lower than those of the control at each water temperature (P<0.001). The Q₁₀ values of the control and BEA were the highest in the water temperature range of 15 to 20℃, but sensitivity to water temperature changes was higher in BEA than in the control. The metabolic energy loss rate (MEL) of fish increased with increasing water temperature regardless of external tagging, but the MEL of the control was higher than that of BEA (P<0.001). These results demonstrate that OCR, thermal sensitivity, and energy expenditure are all affected in adult olive flounder with external PSAT attachment.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.120-125
• /
• 2010

For the measurements of an absorbed dose using the standard dosimetry based on an absorbed dose to water the variety of factors, whether big, small, or tiny, may influence the accuracy of dosimetry. The beam quality correction factor ${\kappa}_{Q,Q_0}$ of an ionization chamber might also be one of them. The cylindrical type of ionization chamber, the PTW30013 chamber, was chosen for this work and 9 chambers of the same type were collected from several institutes where the chamber types are used for the reference dosimetry. They were calibrated from the domestic Secondary Standard Dosimetry Laboratory with the same electrometer and cable. These calibrated chambers were used to measure absorbed doses to water in the reference condition for the photon beam of 6 MV and 10 MV and the electron beam of 12 MeV from Siemens ONCOR. The biggest difference among chambers amounts to 2.4% for the 6 MV photon beam, 0.8% for the 10 MV photon beam, and 2.4% for the 12 MeV electron beam. The big deviation in the photon of 6 MV demonstrates that if there had been no problems with the process of measurements application of the same ${\kappa}_{Q,Q_0}$ to the chambers used in this study might have influenced the deviation in the photon 6 MV and that how important an external audit is.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.197-210
• /
• 2015

The purpose of this study is to find out subjective perception types and needs of interested group on the employment supporting for students with disabilities in college by Q methodology, then to search for political measures to support employment for students with disabilities in the implication of the sorted subjective perception types. The result of the study showed that there are four major sorts of subjectivities on the employment supporting for students with disabilities in college : external dependence(Type1), disability-friendly (Type2), demand tailored(Type3), internal role emphasis(Type4). The result of the study could check that there was necessary reconstruction to disability-friendly infrastructure based on interset and willness on the employment supporting for students with disabilities in college. In addition to that there was necessary to job creation of government, to build network of industry to successful labor market entry of students with disabilities.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3553-3558
• /
• 2013

The three dimensional-quantitative structure activity relationship (3D-QSAR) studies on chemical features of pyridine-2-amines in the external region of c-Met active site (ER chemical features of pyridine-2-amines) were conducted by docking, comparative molecular field analysis (CoMFA), and topomer CoMFA methods. The CoMFA model obtained the partial least-squares (PLS) statistical results, cross-validated correlation coefficient ($q^2$) of 0.703, non cross-validated correlation coefficient ($r^2$) of 0.947 with standard error of estimate (SEE) of 0.23 and the topomer CoMFA obtained $q^2$ of 0.803, $r^2$ of 0.940, and SEE of 0.24. Further, the test set was applied to validate predictive abilities of models, where the predictive $r^2$ ($r{^2}_{pred}$) for CoMFA and topomer CoMFA models were 0.746 and 0.608, respectively. Each contribution of ER chemical features of pyridine-2-amines to the inhibitory potency showed correlation coefficients, $r^2$ of 0.670 and 0.913 for two core parts, 3-(benzo[d]oxazol-2-yl)pyridine-2-amine and 3-(1-(2,6-dichloro-3-fluorophenyl)ethoxy) pyridine-2-amine, respectively, with corresponding experimental $pIC_{50}$.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.28-31
• /
• 2016

Purpose $^{223}Ra-Dichloride$ is used for the medicine of castration-resistant prostate cancer (CRPC) and which emits ${\alpha}-ray$ of 28 Mev that is used for therapy. However $^{223}Ra-Dichloride$ emits ${\beta}-ray$ of 3.6% and ${\gamma}-ray$ of 1.1%(80,156,270 keV) aside from ${\alpha}-ray$ in decay. Therefore we would like to evaluate external radiation expose dose rate of ${\gamma}-ray$ of $^{223}Ra-Dichloride$. Materials and Methods We calculated external radiation expose dose rate using ${\gamma}-constant$ of $^{223}Ra-Dichloride$, $^{99m}Tc$ based on Health physics(2012). $^{223}Ra-Dichloride$ of 3.5 MBq and $^{99m}Tc-MDP$ of 740 MBq were applied. external radiation expose dose rate 15 times from 1m by survey meter. Results ${\gamma}-contant$ of $^{223}Ra$, $^{99m}Tc-MDP$ from 1m distance based on Health physics(2012) is 0.0469, 0.0215. calculated value of external radiation expose dose rate was $16{\mu}Sy$, $34{\mu}Sy$ which activity is $^{223}Ra-Dichloride$ of 3.5 MBq and $^{99m}Tc-MDP$ of 740 MBq from 1 m and measured mean value of 1 m was $0.7{\mu}Sy/h$, $18{\mu}Sy/h$. Conclusion ${\gamma}-constant$ of $^{223}Ra$ is higher than $^{99m}Tc$ based on Health physics(2012). however calculated maximum external radiation expose dose rate of $^{223}Ra-Dichloride$ is lower than $^{99m}Tc$ due to actually used quantity of activity of $^{223}Ra-Dichloride$ is small. measured value of $^{223}Ra-Dichloride$ is also lower than $^{99m}Tc-MDP$. Therefore external radiation expose dose rate of ${\gamma}-ray$ of $^{223}Ra-Dichloride$ is very low.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.165-180
• /
• 2008

The purpose of this research is to propose an effective traffic safety countermeasure to reduce both violations of road traffic acts and accident rates related to the driver's characteristics by measuring them using Q analysis method, a microscopic statistics analysis method. As a result, violators of the road traffic act could be divided into five driving characteristics and causers of traffic accident could be classified into six driving characteristics. By understanding these characteristics, We could establish a proper traffic safety countermeasure for each driving characteristic. The accomplishments of this research are as follows: The first, We could classify the decisive driving characteristics, which cause road traffic acts and traffic accidents, into internal and external causes. The relationship between each driver's characteristic and the occurrence of the road traffic act and traffic accident could be recognized more clearly. We could find the dangerous driver samples who have Accidents proneness. The second, As a result of analyzing the characteristics of these factors, We could sort out and suggest countermeasure for reducing violation of road traffic acts and traffic accidents as a priority countermeasure and complementary countermeasure. Finally, transportation companies most closely related to automobile accidents can judge new personnels on the basis of their driving characteristics before hiring, and also apply this principle to the traffic safety education vigorously.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.561-566
• /
• 2020

We propose to design and to implement a recreational and end - of - play robot for symptom relief in patients with depression. The main symptom of depression is the loss of interest and interest in life. The depression diagnosis patient confirms the emotional analysis revealed by his / her robot through the robot, and performs the greeting or ending play. After analyzing the emotions in the expressions after the play, the function of the embodying robot is confirmed by receiving the report. A simple play can not completely cure a patient with a diagnosis of depression, but it can contribute to symptom relief through gradual use. The design of the play-by-play robot is using Q.bo One, an open-source robot that can interact with Thecorpora. Q.bo One's system captures a user's face, takes a picture, passes the value to the Azure server, and checks the emotional analysis before and after the play with the accumulated data.Play is implemented in Rasubian, the OS of Q.bo One, using the programming language Python and interacting with external sensors. The purpose of this paper is to help the symptom relief of depressive patients in a relatively short time with a play robot.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.91-96
• /
• 2011

In this paper, a low-power direct-conversion transmitter based on current-mode operation, which satisfies the IEEE 802.15.4 standard, is proposed and implemented in a $0.13{\mu}m$ CMOS technology. The proposed transmitter consists of DACs, LPFs, variable gain I/Q up-conversion mixer, a divide-by-two circuit with LO buffer, and a drive amplifier. By combining DAC, LPF, and variable gain I/Q up-conversion mixer with a simple current mirror configuration, the transmitter's power consumption is reduced and its linearity is improved. The drive amplifier is a cascode amplifier with gain controls and the 2.4GHz I/Q differential LO signals are generated by a divide-by-two current-mode-logic (CML) circuit with an external 4.8GHz input signal. The implemented transmitter has 30dB of gain control range, 0dBm of maximum transmit output power, 33dBc of local oscillator leakage, and 40dBc of the transmit third harmonic component. The transmitter dissipates 10.2mW from a 1.2V supply and the die area of the transmitter is $1.76mm{\times}1.26mm$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.372-378
• /
• 2021

A body armor vest is a form of munition related directly to the safety and life of combatants. Therefore, it must meet the requirements for ballistic resistance. The ROK demands the performance of body armor vest meet the Level IIIA specified by the NIJ STD-0101.06 published by the US National Institute of Justice. This study performed acceptance tests on body armor vests. The factors for evaluating the ballistic resistance evaluated were not only whether it penetrates when shooting but also whether the BFS (Backface Signature) depth does not exceed 44 mm when it does not penetrate. The factors were assessed to determine if they were consistent or not. The BFS depth is affected by various test factors, such as the physical properties of the backing material and the changes in the amount of impact with the bullet velocity. In this study, an analysis of the bulletproof performance was performed by extracting the data with the same conditions using ANOVA to remove the influence of these external factors. The analysis revealed a correlation between the BFS depth, bullet velocity, vest conditions, and protection area. The mass production process was analyzed by estimating the Interval of BFS on each lot. Through this, a new methodology for ballistic resistance evaluation and paradigm for future quality assurance is suggested.