• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.338-346
• /
• 2020

In this study, we first measured the Malmquist productivity index by DEA among the Korean ocean carriers. Second, it was intended to present measures to improve productivity by identifying the influence and discriminating power between productivity and the major financial ratios (profitability, financial stability, liquidity, efficiency and value-added productivity). Compared to 2017, there are 11 more shipping carriers with decline in productivity (MPI) than those with an increase in 2018. The increase in productivity is attributed to an increase in the Technology Change Index (TCI) affected by the external environment. There is strong significant correlation between the productivity (MPI) and the management efficiency (CRS). Additionally, the TECI (TECHI) index of the technological efficiency changes from internal factors of the shipping carrier is significantly higher than that of the efficient shipping carrier. This is because of the differences in scale efficiency. The ratio of charter cost/sales is also lower than that of the carriers with high productivity (0.17) and with low productivity (0.21). With 7% of the shipping carrier with MPI>1, only 1% of MPI <1 is found to have a significant impact on its productivity.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.328-334
• /
• 2014

This study examined the effect of concentration polarization on permeate flux in forward osmosis (FO) membrane process for saline and sucrose solution. The reduction in permeate flux during the FO membrane process is largely due to the formation of concentration polarization on membrane surfaces. The flux reduction due to internal concentration polarization formed on the porous support layer was larger than that due to the external concentration polarization on the active membrane surface. Water permeate flux through the FO membrane increased nonlinearly with the increase in osmotic pressure. The water permeability coefficient was $1.8081{\times}10^{-7}m/s{\cdot}atm$ for draw solution on active layer (DS-AL) mode and $1.0957{\times}10^{-7}m/s{\cdot}atm$ for draw solution on support layer (DS-SL) mode in NaCl solution system. The corresponding membrane resistance was $5.5306{\times}10^6$ and $9.1266{\times}10^6s{\cdot}atm/m$, respectively. With respect to the sucrose solution, the permeate flux for DS-AL mode was 1.33~1.90 times higher than that for DS-SL mode. The corresponding variation in the permeation flux (J) due to osmotic pressure (${\pi}$) would be expressed as $J=-0.0177+0.4506{\pi}-0.0032{\pi}^2$ for the forward and $J=0.0948+0.3292{\pi}-0.0037{\pi}^2$ for the latter.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.35-40
• /
• 2020

Recently, devices such as smart watches capable of measuring small biosignals have been released. Body composition, blood pressure, heart rate, and oxygen saturation can be easily obtained. However, the part that is not trusted by the user is accuracy. These biosignals are sensitive to the external environment and have large fluctuations depending on the conditions inside the subject's body. Blood pressure measurements, in particular, still give different results, depending on how the conditions in the body are handled. Therefore, in this study, PPG was analyzed to measure PTT at two points of 80% and 100%, the highest in PTT measurement. The effect of the measured value on SBP and DBP was analyzed and a method was proposed to increase the accuracy. As a result of the study, the measured value of PTT at 80% of the peak PPG is more effective in estimating blood pressure of SBP and DBP than the value measured at 100%. In the regression analysis of the rate of change blood pressure estimation, the coefficient of determination of SBP (80%) was 0.6946, and DBP (100%) was 0.547.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.9-20
• /
• 2005

In this paper, we propose ubiTrack, a system which tracks users' location in indoor environments by employing infrared-based proximity method. Most of recently developed systems have focussed on performance and accuracy. For this reason, they adopted the idea of centralized management, which gathers all information in a main system to monitor users' location. However, these systems raise privacy concerns in ubiquitous computing environments where tons of sensors are seamlessly embedded into environments. In addition, centralized systems also need high computational power to support multiple users. The proposed ubiTrack is designed as a passive mobile architecture to relax privacy problems. Moreover, ubiTrack utilizes appropriate area as a unit to efficiently track users. To achieve this, ubiTrack overlaps each sensing area by utilizing the TDM (Time-Division Multiplexing) method. Additionally, ubiTrack exploits various filtering methods at each receiver and utilization module. The filtering methods minimize unexpected noise effect caused by external shock or intensity weakness of ID signal at the boundary of sensing area. ubiTrack can be applied not only to location-based applications but also to context-aware applications because of its associated module. This module is a part of middleware to support communication between heterogeneous applications or sensors in ubiquitous computing environments.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.24-29
• /
• 2016

The objective of this study was to examine the changes in temperature drop and fruit production due to low pressure fog system in plastic greenhouses during summer cultivation of Korean melon. The indoor temperature of plastic house was dropped by $7.6^{\circ}C$ compared to control on July 26th, 2015 from 10:00 to 18:00. Fruit weight was smaller and lighter by 96g compared to control. The sugar content and color parameter were also enhanced due to application of low pressure fog system. The fraction of malformed fruits was decreased by 15.3% in plots where low pressure fog system was applied. The fraction of marketable fruit and yield were increased by 15.3% and 26% compared to control, respectively. As a result, high quality fruit production within plastic house of summer was increased by applying low pressure fog system and it is positively affected the drop of indoor temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.12
• /
• pp.1401-1409
• /
• 2009

All the forces in the real world act dynamically on structures. Design and analysis should be performed based on the dynamic loads for the safety of structures. Dynamic (transient or vibrational) responses have many peaks in the time domain. Topology optimization, which gives an excellent conceptual design, mainly has been performed with static loads. In topology optimization, the number of design variables is quite large and considering the peaks is fairly costly. Topology optimization in the frequency domain has been performed to consider the dynamic effects; however, it is not sufficient to fully include the dynamic characteristics. In this research, linear dynamic response topology optimization is performed in the time domain. First, the necessity of topology optimization to directly consider the dynamic loads is verified by identifying the relationship between the natural frequency of a structure and the excitation frequency. When the natural frequency of a structure is low, the dynamic characteristics (inertia effect) should be considered. The equivalent static loads (ESLs) method is proposed for linear dynamic response topology optimization. ESLs are made to generate the same response field as that from dynamic loads at each time step of dynamic response analysis. The method was originally developed for size and shape optimizations. The original method is expanded to topology optimization under dynamic loads. At each time step of dynamic analysis, ESLs are calculated and ESLs are used as the external loads in static response topology optimization. The results of topology optimization are used to update the design variables (density of finite elements) and the updated design variables are used in dynamic analysis in a cyclic manner until the convergence criteria are satisfied. The updating rules and convergence criteria in the ESLs method are newly proposed for linear dynamic response topology optimization. The proposed updating rules are the artificial material method and the element elimination method. The artificial material method updates the material property for dynamic analysis at the next cycle using the results of topology optimization. The element elimination method is proposed to remove the element which has low density when static topology optimization is finished. These proposed methods are applied to some examples. The results are discussed in comparison with conventional linear static response topology optimization.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.639-648
• /
• 2014

As provider-centered medical environment has changed into consumer-centered, this study intends to improve the efficiency of management by motivation to administrative staffs and improvement in job satisfaction. The purpose of this study is to analyze the factors that influence job satisfaction among administrative staffs in a metropolitan university hospitals. Survey of 305 people in total were used in the data analysis. AMOS 21 Ver. was used to perform Structural model(SEM) equation. First, the validation results showed the follow results $X^2=206.776$, df=77, Q=2.685, P<.001, GFI=.915, TLI=.927, CFI=.946, RMSEA=.074, which supported this research's significance. Second, compensation and working conditions positively affected motivation. Third, motivation positively influenced job satisfaction. Fourth, communication positively influenced job satisfaction. Fifth, after adjusting the mediating effect, in the relationship between compensation and job satisfaction, it was proved that motivation was a complete mediator. Incase of the relationship between the working conditions and job satisfaction, motivation acted as a partial mediator. Fair and reasonable compensation and employment stability, benefits and other working conditions, better internal and external communication between the organization are to increase job satisfaction. To do this, an administrator needs to have attention and will, and a variety of education and training programs need to be developed. The purpose of this study is to provide basic grounds for future policies related to increasing administrative staffs' job satisfaction.

• Toxicological Research
• /
• v.21 no.4
• /
• pp.325-332
• /
• 2005

The developmental toxicity of water extract of licorice (Glycyrrhiza glabra) was evaluated in rats. Licorice extract (500, 1,000 or 2,000 mg/kg) was dissolved in drinking water and orally administered to male rats from 9 weeks before mating to the day of copulation, and to females from 2 weeks before mating to gestational day 19. On gestational day 20, the animals were sacrificed for Cesarian section, and maternal and fetal abnormalities were examined. Licorice extract neither induce clinical signs, nor affect the body weight gain, feed and water intake, estrous cycle, copulation and fertility rates, blood $17\beta-estradiol$ level and organ weights of dams. Also, the implantation and development including body weights, absorption and death of embryos and fetuses were not influenced by in utero exposure to licorice. In addition, there were no increases in external, visceral and skeletal abnormalities of fetuses. Taken together, it is suggested that no observed adverse effect level of licorice extract is higher than 2,000 mg/kg, and that long-term in utero exposure to licorice might not cause developmental toxicities of embryos and fetuses.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.2 s.61
• /
• pp.199-214
• /
• 1998

This study was undertaken to explain weight control behavior and intention of obese children and adolescents as measured by the elements of the health belief model. A total of 732 obese students from 28 schools in Seoul metropolitan area and their mothers were assessed with a self-administered questionnaire. The analyzed results are as follows; 1. Among obese students, 45.3% of male students and 57.2% of female students, a significantly higher portion than male students, reported that they had tried to lose weight within the recent year. Exercise was the most frequently used method to lose weight followed by diet control, drug use, and specialized clinic visits, in descending order. 2. Male students were more likely to try to lose weight if they perceived a low threat level and their mother had a job, and female students were more likely to try to lose weight if they were younger in age, perceived a low threat level and had strong external motivating factors. 3. Female students showed a significantly higher level of intention to obesity control than male students, and the intention level of their mothers also showed the same trend. 4. In male students, the degree of weight dissatisfaction, weight control experience, the level of obesity related beliefs of students, the educational level of the mother and economic status of the family were significant predictors of intention to obesity control, and in females, age, the level of obesity related beliefs of students and intention of their mothers were significant. In the mothers of male students, obesity index of students, age of the mother and the level of obesity related beliefs of the mother were significant predictors of intention of the mother, and in the mothers of female students, obesity index of students, occupational status of the mother and obesity related beliefs of the mother were significant. 5. According to the path model of intention to obesity control, the degree of weight dissatisfaction had the most powerful effect in male students, and perceived net benefit level was the most important variable in female students. Since the weight control behavior and intention of obese students were more predictable by the degree of weight dissatisfaction than the obesity index, we can conclude that only the students dissatisfied with their weight are well motivated for obesity control. There can be a discrepancy between the mother and her child's beliefs and intention status(especially in male students), so the therapists should also assess the student's opinion as well as the mother's. In female students, the perceived net benefit level wag the most important predictor of intention to obesity control, therefore the intervention program should pay particular attention to the positive benefits of weight control rather than negative aspects(threats) of obesity.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1484-1488
• /
• 2009

Familial hypokalemic periodic paralysis (HOKPP) is an autosomal dominant muscle disorder characterized by episodic attacks of muscle weakness with concomitant hypokalemia. Mutations in either a calcium channel gene (CACNA1S) or a sodium channel gene (SCN4A) have been shown to be responsible for this disease. The combination of sarcolemmal depolarization and hypokalemia has been attributed to abnormalities of the potassium conductance governing the resting membrane potential. To understand the pathophysiology of this disorder, we examined both mRNA and protein levels of delayed rectifier potassium channel genes, KCNQ3 and KCNQ5, in skeletal muscle fibers biopsied from patients with HOKOur results showed an increase in the cytoplasmic level of KCNQ3 protein in patients' cells exposed to 50 mM external concentration of potassium. However, mRNA levels of both channel genes did not show significant change in the same condition. Our results suggest that long term exposure of skeletal muscle cells in HOKPP patients to high extracellular potassium alters the KCNQ3 localization, which could possibly hinder the normal function of this channel protein. These findings may provide an important clue to understanding the molecular mechanism of familial hypokalemic periodic paralysis.