• 한국치위생학회지
• /
• 제6권4호
• /
• pp.481-493
• /
• 2006

The purpose of the review article was to summarize and discuss the available information concerning the effect of bleaching on human teeth and reduced treatment on negative influence. Tooth bleaching effect was differ from extent of concentration and application period of a tooth bleaching agent, certainly full knowledge prior treatment about adverse effect possible appearance and follow clinical treatment for the least reduce. It remains unclear in how far those observation may result in significant adverse effect under clinical conditions. Nevertheless, further investigation are necessary to elucidate these aspect more precisely. The findings of the study were as follows : 1. It is recommended to delay placement of restorations after termination of bleaching therapy for at least 1-3 weeks. 2. Reduced negative influence that is clinical feasibility of catalase in protecting bleached surface against Oxygen radical. 3. The residual peroxide in tooth after bleaching seems to be removed by gradual diffusion and it may be possible to eliminate the adverse effect on tooth by using water displacement solution, ethylalcohol and aceton including it for effective removal of free radical oxygen.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.172-175
• /
• 2011

Financial supports for housing for the disabled is limited since a certain amount of budget needs to be distributed for a number of disabled families. Therefore, it is important to fund renovation for the disabled effectively and properly. Financial and administrative supports for the renovation which intended to improve housing conditions in terms of accessibility (barrier free) and comfort needs to be implemented with larger outcome and smaller budget. The purpose of this study was to investigate various factor such as renovation cost and renovation elements, influence satisfaction of residents with disabilities. Participants of this study are limited to the recipients of financial supports for housing renovation and refurbishment from City of Seoul and Ministry of Heal and Welfare. A total of 155 cases were analyzed using post occupancy survey and analysis of project cost data. Overall, more cost were used for modification for housing condition improvement than the cost for removal of architectural barriers. Renovation cost differences were not apparent among the type and extent of an individual's disabilities. Instead existing housing type and physical condition for the housing affects cost for renovation more significantly. Overall the renovation cost is positively related to resident's satisfaction using regression analysis.

• 한국CDE학회논문집
• /
• 제2권3호
• /
• pp.175-185
• /
• 1997

Given the widespread use of the Finite Element Method in strength analysis, automatic mesh generation is an important component in the computer-aided design of parts and assemblies. For a given resolution of geometric accuracy, the purpose of mesh generators is to discretize the continuous model of a part within this error limit. Sticking to this condition often produces many small elements around small features in spite that these regions are usually of little interest and computer resources are thus wasted. Therefore, it is desirable to selectively suppress small features from the model before discretization. This can be achieved by low-pass filtering a CAD model. A spatial function of one dimension higher than the model of interest is represented using the Fourier basis functions and the region where the function yields a value greater than a prescribed value is considered as the extent of a shape. Subsequently, the spatial function is low-pass filtered, yielding a shape without the small features. As an undesirable effect to this operation, all sharp corners are rounded. Preservation of sharp corners is important since stress concentrations might occur there. This is why the LPF (low-pass filtered) model can not be directly used. Instead, the distances of the boundary elements of the original shape from the LPF model are calculated and those that are far from the LPF model are identified and removed. It is shown that the number of mesh elements generated on the simplified model is much less than that of the original model.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3733-3737
• /
• 2013

Polyacrylonitrile (PAN)-based ultrafine fibers and carbon fibers were produced by wet-spinning, and the crystal sizes and thermal and mechanical properties of the fibers were investigated. Scanning electron microscopy revealed that the superfine fibrils in the surfaces of the PAN/polyvinyl acetate (PVA) blend fibers increased slightly with increasing PAN content before removal of the PVA. Differential scanning calorimetry indicated that the PAN and PVA in the blend fibers do not mix and, therefore, each maintains their inherent thermal characteristics. The crystal sizes of the blend fibers prepared by removing PVA with water increased at 5 wt % water. The extent of the reaction of the PAN carbon fibers, as calculated from the FT-IR spectra, is maximized at the stepwise temperature of $230^{\circ}C$, and the density increased significantly above this temperature. The carbon fibers had relatively good mechanical properties, as shown by their tensile strength and modulus values of 2396 MPa and 213 GPa, respectively.

• Archives of Pharmacal Research
• /
• 제19권6호
• /
• pp.462-468
• /
• 1996

The present study was undertaken to investigate the effects of age on angiotensin II (AII) response and antagonistic activity of losartan using aortic rings and liver homogenates from rats ranging in age from 0.7 to 20 months. Whether the endothelium was present or not, the maximum contractile response to AII decreased with age. Removal of the endothelium enhanced AII-induced maximum contraction and these endothelial effects seemed to be due to endothelium-derived relaxing factor (EDRF) in all ages. Equilibrium binding studies demonstrated an age-related decrease in maximum binding $(B_{max})$ with little change in binding affinity $(K_d)$. In rat aorta, the extent of losartan-induced parallel shifts $(K_B)$ in AII concentration-response curves was not significantly different between ages. In addition, $IC_{50}$ value of losartan in competition binding was not changed with age in rat liver homogenates. These results suggest that the potency of losartan is not altered with age in rat aorta and liver, although AII-induced contractile response and the maximum AII binding decreased significantly with age.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.

• Journal of Korean Neurosurgical Society
• /
• 제55권6호
• /
• pp.383-386
• /
• 2014

Objective : Symptomatic thoracic disc herniation often requires prompt surgical treatment to prevent neurological deterioration and permanent deficits. Anterior approaches offer direct visualization and access to the herniated disc and anterior dura but require access surgeons and are often associated with considerable postoperative pain and pulmonary complications. A disadvantage with using posterior approaches in the setting of central calcified thoracic disc herniation however, has been the limited visualization of anterior dura and difficulty to accurately assess the extent of decompression. Methods : We report our experience with intraoperative ultrasound (US) guidance during a modified posterior transpedicular approach for removal of a central calcified thoracic disc herniation with a review of pertinent literature. Results : The herniated thoracic disc was successfully removed with posterior approach with the aid of intraoperative US. The patient had significant neurological improvement at three months follow-up. Conclusion : Intraoperative ultrasound is a simple yet valuable tool for real-time imaging during transpedicular thoracic discectomy. Visualization provided by intraoperative US increases the safety profile of posterior approaches and may make thoracotomy unnecessary in a selected group of patients, especially when a patient has existing pulmonary disease or is otherwise not medically fit for the transthoracic approach.

• Carbon letters
• /
• 제8권4호
• /
• pp.299-306
• /
• 2007

Four stream- activated carbons were prepared by carbonizing apricot stones at $600^{\circ}C$ followed by gasification with steam at $950^{\circ}C$ to burn-off's=17, 32, 49 and 65%. The textural parameters of these activated carbons were determined from nitrogen adsorption results at 77 K. The total pore volume and the mean pore radius increased with the increase of % burn-off whereas the surface area increased with the increase of burn- off from 17 to 32 and further to 49%. Further increase of burn-off to 65% was associated with a considerable decrease in surface area as a result of pronounced pore widening due to pore erosion. The surface pH values of the carbons investigated range between 7.1 and 8.2. The adsorption of oxamyl onto the activated carbon followed pseudo-second order kinetics and the equilibrium adsorption isotherms fitted Langmuir adsorption model. The adsorption of oxamyl proved to be of the physical type and took place in non-micropores. The amount of oxamyl adsorbed expressed as $q_m$ depends to a large extent to the surface area located in non-micropores $S^{\propto}\;_n$, where a straight line relationship passing through the origin was obtained.

• Structural Engineering and Mechanics
• /
• 제61권1호
• /
• pp.117-124
• /
• 2017

Load testing is one of the important tests to determine if the structural elements can be used at the intended locations for which they have been designed. It is nothing but gradually applying the loads and measuring the deflections and other parameters. It is usually carried out to determine the behaviour of the system under service/ultimate loads. It helps to identify the maximum load that the structural element can withstand without much deflection/deformation. It will also help find out which part of the element causes failure first. The load-deflection behaviour of the road bridge girder has been studied by carrying out the load test after simulating the field conditions to the extent possible. The actual vertical displacement of the beam at mid span due to the imposed load was compared with the theoretical deflection of the beam. Further, the recovery of deflection at mid span was also observed on removal of the test load. Finally, the beam was checked for any cracks to assert if the beam was capable of carrying the intended live loads and that it could be used with confidence.

• Archives of Pharmacal Research
• /
• 제19권2호
• /
• pp.112-115
• /
• 1996

Some antioxidant phenolic compounds exhibit prooxidant activity mainly due to their abilities to reduce $Fe^{3+}\; to\; Fe^{2+}.$ Reducing ability and prooxidant activity of maltol, an antioxidant component of Korean red ginseng, were compared with those of pyrogallol. Maltol at 2 mM did not appreciably reduce$ Fe^{3+}\; to\; Fe^{2+}$ and also failed to reduce nitroblue tetrazolium. Stimulation of hydroxyl radical mediated-deoxyribose degradation by pyrogallol was maximal at 60 .mu.M. Maltol stimulated the deoxyribose degradation to a much less extent, and a similar stimulatory effect was observed at a concentration of more than 100-fold higher than that of pyrogallol. The stimulatory effect of maltol reached a plateau over 1 mM, suggesting the removal of hydroxyl radicals by excess maltol. In bleomycin-$Fe^{3+}$-DNA assay, maltol at 2 mM produced a 2.5-fold increase of the iron-bleomycin-dependent DNA degradation over the basal value, whereas pyrogallol at 10 .mu.M accelerated DNA degradation by ca. 10-fold. Furthermore, maltol inhibited $Fe^{2+}$-stimulated DNA degradation by bleomycin. These results strongly suggested that maltol is an antioxidant with little prooxidant activity.