• Korean Journal of Veterinary Research
• /
• v.45 no.1
• /
• pp.63-70
• /
• 2005

African swine fever (ASF) is an infectious disease of domestic and wild pigs for which there is no vaccine in the world. A proper surveillance of viral activity and a timely response to ASF outbreaks depend upon the rapid diagnosis of ASF viral infection. Internationally prescribed enzyme-linked immunosorbent assay (ELISA) is a fast, sensitive test routinely used in the diagnosis of the ASF. However, inactivated whole ASF virus antigen used in this test is a tedious to prepare and has a risk of outside exposure of infectious virus by laboratory accident during the preparation. An ASF virus noninfectious recombinant antigen is a safe and easily produced alternative antigen for use in diagnostic assay. We have cloned the ORF O61R gene of the ASF virus to generate a recombinant baculovirus producing the p12 protein in insect cells under control of the polyhedrin promoter as non-fusion protein. When used in an indirect ELISA, the p12 antigen showed reactivity with all known ASF positive pig sera but not with negative pig sera. Our results indicated that the p12 protein would be one of alternative antigens for diagnosis of the ASF.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.6
• /
• pp.381-385
• /
• 2009

The first case of intracranial metastases of a cervical intramedullary low-grade astrocytoma without malignant transformation in adult is presented in this report. Seven years ago, a 45 year-old male patient underwent biopsy to confirm pathologic characteristics and received craniocervical radiation and chemotherapy for a grade II astrocytoma in the cervical spinal cord. Two years later, posterior fusion was necessary for progressive kyphosis in the cervical spine. He was well for approximately 7 years after the primary surgery. Two months ago, he presented with partial weakness and incoordination with gait difficulty. MRI Scan demonstrated multiple small lesions in the cerebellar vermis and left hemisphere. After suboccipital craniectomy and posterior cervical exposure, the small masses in the cerebellar vermis and hemispheres were excised to a large extent by guidance of an intraoperative navigation system. The tumor at the cervical and brain lesions was classified as an astrocytoma (WHO grade II). When a patient with low-grade astrocytoma in the spinal cord has new cranial symptoms after surgery, radiaton, and chemotherapy, the possibility of its metastasis should be suspected because it can spread to the intracranial cavity even without malignant transformation as shown in this case.

• Journal of Plant Biotechnology
• /
• v.46 no.2
• /
• pp.88-96
• /
• 2019

Terpenes constitute a large class of secondary metabolites in plants. The Oryza sativa terpene synthase is a vital gene in plant defense response. In this study, the molecular and physiological functions of Oryza sativa terpene synthase 30 (OsTPS30, LOC_Os08g07080) were investigated after exposure of the seeds and plants to gamma-rays. The OsTPS30 expression was slightly induced at 200 Gray (Gy), but was significantly induced at 400 Gy. The total terpenoid was synthesized more in OsTPS30-overexpressing (OX-OsTPS30) Arabidopsisthaliana plants than in wild-type (WT) plants. The OX-OsTPS30 plants exhibited resistance to gamma-rays, as compared to WT. The OX-OsTPS30 plants had significantly increased height and weight after gamma irradiation. Additionally, the activity of antioxidant enzymes was increased more in OX OsTPS30 plants than in WT plants after gamma irradiation. Furthermore, the OsTPS30-GFP fusion protein was mostly localized in the chloroplast, suggesting that OsTPS30 is putative MEP pathway-related terpene synthase.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.981-983
• /
• 2003

The Remote Sensing Group of the Mines and Geosciences Bureau (MGB) has acquired SAR data of the Central Cebu Island for its research study area. The MGB is one of the proponent of DOST-NASA PACRIM II Project, which is composed of eleven (11) agencies and institutions in the Philippines, that focuses on the scientific application of radar data with the theme on hazard and natural resources management. The PACRIM II Project, being done on three-year term, is slated for completion in the year 2004. The main thrust of the project study of the MGB is the baseline environmental monitoring studies, on which the data are to be fused with some other available data from LandSAT and photogrammetry. The generated data is part of the information for the update of thematic mapping being done. The 12 ${\times}$ 60 km swath AirSAR data covers the Central Cebu Island. The highlights of conducting this research project are: Extent of Watershed Basin boundaries - identification of the tributaries that drain water supply to the metropolitan area; Monitoring of the mountain highways - identification of landslide risk prone sites as part of natural hazard monitoring on a national highway that cuts along the mountainous areas; and Coastline change assessment - monitoring the coastline activities relative to the rapid urbanization and exposure as part of coastal management. The Phase 1 of this report discusses the fusion with the ArcView generated data as baseline studies on the monitoring activities.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.209-220
• /
• 2009

Octachlorostyrene(OCS) has been persisted in environment because it has not been decomposed easily. And, it has been known as highly toxic compounds to the environment and human as well as accumulated as high concentrations in a biota through a food chain. Therefore, OCS was monitored for water, soil and fish sampled from the areas where were able to be contaminated with OCS. The recoveries of octachlorostyrene were 93.1${\sim}$98.6% in water, 90.4${\sim}$94.8% in soil and 81.5${\sim}$90.2% in fish and detection limits were 0.0004 mg $L^{-1}$ for water, and 0.002 mg $kg^{-1}$ for soil and fish, respectively. OCS was not detected in water, sediment, soil and fish samples from Ulsan, Yeosu, Daejeon and Sihwa industrial complex and in soil sampled nearby incineration plants in all parts of the country. Accordingly, we estimated that there is no risk from exposure of OCS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.421-422
• /
• 2011

The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• The Journal of Korean Society for School & Community Health Education
• /
• v.22 no.4
• /
• pp.49-60
• /
• 2021

Objectives: Laboratories have various latent physical, chemical, biological, and ergonomical factors according to the diversification and fusion of research and development activities. This study aims to investigate the chemical exposure concentrations of college laboratories and evaluate their health risks, and use them as basic data to promote the health of college students. Methods: The sampling and analysis of harmful chemicals in the air in laboratories were performed using Method 1500 of the U.S. National Institute for Occupational Safety and Health (NIOSH)의 Method 1500. The harmful chemicals in the laboratories were divided into carcinogenic and non-carcinogenic chemicals. Risk assessment was performed using the cancer risk (CR) for carcinogenic chemicals and using the hazard index (HI) for non-carcinogenic chemicals. Results: The harmful chemicals in college laboratories consisted of acetone, diethyl ether, methylene chloride, n-hexane, ethyl acetate, chloroform, tetrahydrofuran, toluene, and xylenes. They showed the highest concentrations in laboratories A (acetone 0.001~2.34ppm), B (chloroform 0.95~6.35ppm), C (diethyl ether 0.08~8.68ppm), and D (acetone 0.07~14.96ppm). The risk assessment result for non-carcinogenic chemicals showed that the HI of methylene chloride was 2.052 for men and 2.333 for women, the HI of N-hexane was 4.442 for men and 5.05 for women. Thus, the HI values were higher than 1. The risk of carcinogenic chemicals is determined by an excess cancer risk (ECR) value of 1.0×10^-5, which means that one in 100,000 people has a cancer risk. The ECRs of chloroform exceeded 1.0×10^-5 for both men and women, indicating the possibility of cancer risk. Conclusion: College laboratories showed the possibility of non-carcinogenic health risks for methylene chloride, n-hexane, tetrahydrofuran (THF), toluene, and xylenes, and carcinogenic health risks for chloroform, methylene chloride. However, this study used the maximum values of measurements to determine the worst case, and assumed that the subjects were exposed to the corresponding concentrations continuously for 8 hours per day for 300 days per year. In consideration of the nature of laboratory environment in which people are intermittently exposed, rather than continuously, to the chemicals, the results of this study has an element of overestimation.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.236-243
• /
• 2023

This study aimed to investigate the survival rates, hematologic responses, and histological responses of juvenile Korean rockfish (Sebastes schlegelii) exposed to artificial increase of water temperature. The water temperature was incrementally raised from the initial 23℃ to 26℃, 28℃, 30℃, and 31℃, with a 1℃ increase every 24 hours. The fish were exposed to each water temperature setting for a period of seven days. No mortality was observed at 26℃ and 28℃. However, at 30℃, mortality began on the 4th day of exposure, with an overall survival rate of 1.5% at the end of the seventh day. At 31℃, mortality occurred as early as the first day of exposure, and all fish had perished by the second day. Plasma cortisol and glucose concentrations increased as water temperature rose, with a significant decrease observed at 31℃. No significant difference in plasma GPT concentration was observed across the various experimental temperatures. In contrast, plasma GOT concentration significantly increased at 31℃. Histological examination revealed that both the liver and gills exhibited normal histology at the initial temperature of 23℃ and at 26℃. However, at 28℃ hepatocellular hypertrophy and gill lamellar epithelial hyperplasia and epithelial cell lifting were observed. At 30℃, hepatocellular condensation and gill lamellar fusion were noted. Finally, at 31℃, severe histological changes were observed, including hepatocellular necrosis, liver congestion, and gill filament necrosis.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.33-37
• /
• 2011

In this study, the degradation mechanism of mounted chip resistors with Ag-epoxy isotropic conductive adhesives (ICAs) under the humidity exposure ($85^{\circ}C$/85%RH) was examined by electrical resistance change and microstructural study. The effect of the chloride content in Ag-epoxy ICA on joint stability was also examined. The increasing range of the electrical resistance in the typical ICA joint was greater than that in the low Cl content ICA joint. In the case of the typical ICA joint, Sn oxides such as SnO, $SnO_2$, and Sn-Cl-O were formed inhomogeneously on the surface of the Sn plating during the $85^{\circ}C$/85%RH test. In contrast, no Sn-Cl-O was found in the low Cl content ICA joint during the $85^{\circ}C$/85%RH. It is suggested that Cl in Ag-epoxy ICA accelerate the electrical degradation of Sn plated chip components joined with Ag-epoxy ICA.