• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.113-130
• /
• 2006

Recently with the explosive growth of Internet applications, the attacks of hackers on network are increasing rapidly and becoming more seriously. Thus information security is emerging as a critical factor in designing a network system and much attention is paid to Network Intrusion Detection System (NIDS), which detects hackers' attacks on network and handles them properly However, the performance of current intrusion detection system cannot catch the increasing rate of the Internet speed because most of the NIDSs are implemented by software. In this paper, we propose a new high performance network intrusion using Network Processor. To achieve fast packet processing and dynamic adaptation of intrusion patterns that are continuously added, a new high performance network intrusion detection system using Intel's network processor, IXP1200, is proposed. Unlike traditional intrusion detection engines, which have been implemented by either software or hardware so far, we design an optimized architecture and algorithms, exploiting the features of network processor. In addition, for more efficient detection engine scheduling, we proposed task allocation methods on multi-processing processors. Through implementation and performance evaluation, we show the proprieties of the proposed approach.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.696-699
• /
• 2001

In these days, there are explosive growths of Internet users. But the damages of hacking are on the increase lately too. Currently, many researches for detection of hacking are studying, and there are many Hacking detection tools. In this thesis, We designed and implemented Sniffing detection and Management Tool, Which ran search an invasion by sniffing in Local LAN environment. The Implementation of Sniffing Detector and Management Tool are composed of two modules. In other words, They are Sniffing Detector Tool and Sniffing Management Tool. The Sniffing Detector Tool discovers implementation of the Sniffing from optional host to Sniffing Detector host. And The Sniffing Management Tool displays information of Sniffer on Web_Browser.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.69-74
• /
• 2009

Abandoned objects should be treated as possibly dangerous things for public areas until they turn out to be safe because explosive material or chemical substance is intentionally contained in them for public terrors. For large public areas such as airports or train stations, there are limits in man-power for security staffs to check all the monitors for covering the entire area under surveillance. This is the basic motivation of developing the automatic detection system for dangerous abandoned objects based on vision technology. In this research, well-known DBE is applied to stably extract background images and the HOG algorithm is adapted to discriminate between human and stuff for object classification. To show the effectiveness of the proposed system, experiments are carried out in detecting intrusion for a forbidden area and alarming for abandoned objects in a room under surveillance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.602-611
• /
• 2002

Recent advances in technology have resulted in rapid growth in mobile communication. With this explosive growth, reliable transmission and error resilient technique become increasingly necessary to offer high quality multimedia service. The success of error resilient techniques at decoder sensitively depends on error detection performance. Therefore, this paper proposes a computationally very simple and efficient error detection technique using fragile watermark for real-time video communication. To balance between image quality degradation and error detection efficiency, fragile watermark is embedded only in least significant bits of selected transform coefficients. The proposed method is workable without additional bit in video bitstream and can be implemented very efficiently. This method will be useful in video communication in error prone environment such as wireless channel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1551-1558
• /
• 2001

Recently, a number of underground pipelines have been drastically increased. The integrity of these buried pipelines, especially gas transmitting pipelines, is of importance due to an explosive characteristic of natural gas. The third party damage is known as one of the most critical factor which causes fatal accidents. For this reason, a number of systems detecting third party damage are under development. The major concern in the development of third party damage detection system is to transmit vibration signals out of accelerometer to signal conditioner and data acquisition system without any interference caused by noise. The objective of this paper is to develope a fiber optic accelerometer applicable to third party damage detection system. A fiber optic accelerometer was developed by use of combining principles of one degree of freedom vibration model and an extrinsic Fabry-Perot interferometer. The developed fiber optic accelerometer was designed to perform with a sensitivity of 0.06mVg, a frequency range of less than 6kHz and an amplitude range of -200g to 200g. The developed, accelerometer was compared with a piezoelectric accelerometer and calibrated. In order to verify the developed accelerometer, the field experiment was performed. From the field experiment, vibration signals and the location of impact were successfully detected. The developed accelerometer is expected to be used for the third party damage detection system which requires long distance transmission of signals.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.239-244
• /
• 2006

Borehole radar reflection surveys were carried out in the horizontal borehole to detect EDZ while constructing the tunnel for the research facility of the nuclear waste disposal in Korea. The horizontal borehole has been bored at a length of 35 m from shelter to be parallel with the tunnel which would be planed. While the tunnel has been constructing with the explosive excavation, the borehole radar reflection surveys carried out 5 times with the interval of 2 or 4 days for monitoring EDZ. The most typical change of the reflection event resulted from the face of the wall of tunnel which had been produced newly by the excavation of the tunnel daily, EDZ has been detected with constructing images of difference between two measurement stages, and also the change of EDZ through the time has been done, which is due to the generation of crack and weakening of the rock strength of the face of the tunnel's wall near previous portion of the face of a blind end of tunnel according to explosive excavation.

• The Korean Journal of Ceramics
• /
• v.2 no.2
• /
• pp.83-88
• /
• 1996

Long term stability, sensitization in air, and gas sensing behaviors of tin oxide films were investigated with doping of antimony and palladium. The tin oxide films were prepared on a Corning glass by reactive rf sputtering method and tested for detection of hydrogen gas. Sb-doping improved a long-term stability in the base resistance of $SnO_2$ film sensor. A small amount of Pd doping caused the optimum sensor operating temperature to reduce and also enhanced the gas sensitivity, compared with the undoped $SnO_2$ film. Gas sensitivity depended largely on the film thickness. The important sensitization reactions for sensor operating were $(O_{2ads})+e^-\;{\rightarrow}\;2(O_{ads})^-$ on the surface of $SnO_2$ film at elevated temperature in air and a followed reaction of hydrogen atoms with $(O_{ads})^-$ ions.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.211-214
• /
• 2020

Chlorine dioxide is very effective gas for sterilization or disinfection (in manufacturing), and does not produce harmful by-products after use. However, if its concentration exceeds 10 %, it become explosive and cannot be compressed or stored. Therefore, it is necessary to measure its concentration. In this study, the concentration of chlorine dioxide with a high oxidizing strength was measured using a metal oxide sensor. The sensor was a commercially available TGS series from Figaro. The sensitivity of the sensor was inversely proportional to a low concentration of chlorine dioxide gas below 6 ppm and returned to the initial resistance at about 6 ppm. When the gas concentration reached multiples of 10 ppm, resistance of the sensor increased to several megaohms.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.510-520
• /
• 2014

Metal-Organic Frameworks(MOFs) are attracting attentions from various fields including chemistry, materials science, physics and medical science because of its exceptionally large pore volumes and surface areas which far exceed those of zeolites. The possibilities of applications of MOFs for gas separation, catalysts, drug delivery, and high explosives detections have already been verified. In these review the author describes the structures, synthetic methods and applications of MOFs based on the literatures published during last 15 years to give the readers general pictures of MOF itself as well as the global research trends of these materials.