• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1864-1871
• /
• 2017

This paper presents a design of a 2-phase segmental stator type 4/3 switched reluctance motor (SRM) for air-blower application. The air-blower requires only one direction rotation, high rotor speed without torque dead-zone. In order to satisfy the requirements of the load, the rotor of the 4/3 proposed SRM is designed with wider rotor pole arc and non-uniform air-gap is applied on the rotor shape. With a special rotor structure, the motor generates a wider positive torque region and has no torque dead-zone. The stator of the proposed SRM is constructed with two segmental C-cores, and there are no magnetic connections between 2 C-cores. The flux follows in a short closed loop in each C-core and has no reversal flux in the stator. The static and dynamic characteristics of the proposed motor are analyzed by the finite element method (FEA) and Matlab-Simulink, respectively. In order to verify the design, a prototype of the proposed motor has manufactured for laboratory test. The performance of the proposed motor is verified by the simulation and experimental results.

• 한국터널지하공간학회 논문집
• /
• 제14권4호
• /
• pp.421-435
• /
• 2012

연마재 워터젯을 이용하여 다양한 영향변수에 따라 암석시편에 굴착(제거)실험을 수행하였다. 현장암반굴착 가능성을 판단하기 위해 신선한 경암(화강암) 시편을 기준으로 수압, 노출시간, 그리고 이격거리에 따라 굴착성능 및 굴착형상을 분석하였다. 특히 이격거리는 현장에서 요구하는 높은 수준의 조건에서 실험을 실시였다. 추가적으로 암석에 따른 굴착성능을 비교하기 위해, 실제 굴착현장에서 획득한 암석시편을 대상으로 P파 속도를 측정하여 동일한 조건에서 워터젯 실험을 수행하였다. 획득된 실험결과로부터 워터젯 변수가 암반제거에 미치는 영향을 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.835-840
• /
• 2011

한국형발사체에서 독자적인 액체로켓엔진을 확보하기 위해 터보펌프개발은 필수적인 항목이라고 볼 수 있으며, 이 터보펌프의 실험적 신뢰성검증을 위한 실매질 시험설비의 구축을 위해 최근 액체산소와 케로신을 토대로 한 시험설비의 상세설계가 수행되어져 왔다. 본 논문에서는 시험설비 설계결과를 토대로 75톤급 터보펌프의 요구규격과 함께 실매질 시험설비의 설계규격을 제시하였고, 대표적인 서브시스템들의 설계결과를 설명하였다. 또한, 시험설비 운용과정에서 발생할 수 있는 주요 서브시스템에 대한 불확실성을 시뮬레이션과 실험적 검증을 통하여 사전에 제거할 수 있도록 하였다.

• 한국주조공학회지
• /
• 제32권2호
• /
• pp.65-74
• /
• 2012

In this paper, we present the results of our studies on optimal die design towards development of a vacuum die casting process to fabricate fuel cell bipolar plate with micro-channel array. Cavity and overflow shape is designed by computational filling analysis of MAGMA soft. Optimal die design consists of seven overflows at the end of cavity and three overflows at each side wall of cavity. The molten metal that passed the gate and reached the side wall flowed into the side overflow, no turbulent flow occurred, and the filling behavior and velocity distribution were uniform. In addition, partially solidified molten metal passing through the channel was perfectly eliminated by overflow without back-flow. When vacuum pressure, injection speed of low and high region was 300 mbar, 0.3 m/s and 2.5 m/s respectively with Silafont 36 die casting alloy, sound sample without casting defects was obtained. The experimental results are nearly consistent with simulation results.

• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1098-1105
• /
• 2007

Quantum mechanical and molecular dynamics simulation analysis has been performed on the model system for CALB (Candida antarctica lipase B) with esters to study the reaction mechanism and conformational preference of catalytic hydrolysis and the esterification reaction. Using quantum mechanical analysis, the ping-pong bi-bi mechanism was applied and energies and 3-dimensional binding configurations of the whole reaction pathways were calculated. Further molecular dynamics simulation analysis was performed on the basis of the transition state obtained from quantum mechanical study to observe the effect of structures of the substrates. Calculation results using substrates of different chain length and chiral configurations were compared for conformational preference. The calculated results showed very small influence on chain length, whereas chiral conformation showed big differences. Calculated results from molecular modeling studies have been compared qualitatively with the experimental data using racemic mixtures of (${\pm}$)-cis-4-acetamido-cyclopent-2-ene-1-ethyl acetate as substrates.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.15-23
• /
• 2004

In order to investigate efficiency and flowfield charateristics of the intake-diffuser for the ship waterjet propulsion, new experimental verification technology was set up in the cavitation tunnel. 1-hole and 5-hole pilot tubes were designed and manufactured to measure the pressure and velocity distributions at intake-diffuser entrance and impeller inlet. The calibration of the 5-hole pilot tubes is conducted at the cavitation tunnel The cavitation inception occurs at the intake lip, and the occurrence position depends on IVR (Inlet Velocity Ratio) condition. The present experimental device will be applied sufficiently for the development of the design and performance improvement technologies.

• 물과 미래
• /
• 제26권3호
• /
• pp.75-85
• /
• 1993

본 연구에서는 QUAL2E 모형의 계산구간을 유입지점마다 분할하여 정하고, 계산에 피룡한 수문인자들 및 수질자료를 가능한한 실측치나 또는 직접계산치로 사용했다. 대상하천은 미국 Clorado 주의 South Platte 강을 선정하고, 수질항목 용존산소(DO)와 생물학적 산소요구량(CBOD5)에 대하여 1991년 9월과 1992년 1월 자료를 사용하여 계산하고 관측치와 비교한바, DO는 5%이내, CBOD5는 20% 정도에서 잘 일치하였다. 수질예측결과에 의하면 2001년에는 대상하천의 수질이 미환경청 기준으로 4등급수에 해당되는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.19-33
• /
• 2014

Structural robustness refers to the ability of a structure to avoid disproportionate consequences to the original cause. Currently attentions focus on the concepts of structural robustness, and discussions on methods of robustness based structural design are rare. Firstly, taking basis in robust $H_{\infty}$ control theory, structural robustness is assessed by $H_{\infty}$ norm of the system transfer function. Then using the SIMP material model, robustness based design of grid structures is formulated as a continuum topology optimization problem, where the relative density of each element and structural robustness are considered as the design variable and the optimization objective respectively. Generalized elitist genetic algorithm is used to solve the optimization problem. As examples, robustness configurations of plane stress model and the rectangular hyperbolic shell model were obtained by robustness based structural design. Finally, two models of single-layer grid structures were designed by conventional and robustness based method respectively. Different interference scenarios were simulated by static and impact experiments, and robustness of the models were analyzed and compared. The results show that the $H_{\infty}$ structural robustness index can indicate whether the structural response is proportional to the original cause. Robustness based structural design improves structural robustness effectively, and it can provide a conceptual design in the initial stage of structural design.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.391-399
• /
• 2015

This study modeled the compressive strength and elastic modulus of hardened cement that had been treated with an expansive additive to reduce shrinkage, in order to determine the mechanical properties of the material. In hardened cement paste with an expansive additive, hydrates are generated as a result of the hydration between the cement and expansive additive. These hydrates then fill up the pores in the hardened cement. Consequently, a dense, compact structure is formed through the contact between the particles of the expansive additive and the cement, which leads to the manifestation of the strength and elastic modulus. Hence, in this study, the compressive strength and elastic modulus were modeled based on the concept of the mutual contact area of the particles, taking into consideration the extent of the cohesion between particles and the structure formation by the particles. The compressive strength of the material was modeled by considering the relationship between the porosity and the distributional probability of the weakest points, i.e., points that could lead to fracture, in the continuum. The approach used for modeling the elastic modulus considered the pore structure between the particles, which are responsible for transmitting the tensile force, along with the state of compaction of the hydration products, as described by the coefficient of the effective radius. The results of an experimental verification of the model showed that the values predicted by the model correlated closely with the experimental values.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1874-1881
• /
• 2002

Heat dissipation technology using the flow resonant phenomenon is a kind of a new concept in the heat transfer area. A vibration exciter is needed to enhance air flow mixing which has the natural shedding frequency of thermal system. A mechanical vibrating device for the air flow oscillation is introduced, which is driven by a moving coil actuator with a displacement estimator using strain gage. An analytical dynamic model for this mechanical vibration exciter is presented and its validity is checked by the comparison with experimental data. Values of some unknown system parameters in the analytic model are estimated through the system identification approach. Based on this mathematical model, the vibration exciter using strain displacement estimator is developed. During the experimental verification phase, it turns out the high modal resonant characteristics of a vibrating plate are a major barrier against obtaining a high bandwidth vibration exciter.