• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.2
• /
• pp.403-420
• /
• 1997

In this paper, we examine the effect of production uncertainty to production control policies. First, we examine two famous production control policies, namely, MRP and JIT from the view point of shop floor control perspective, and analyze the differences between them due to demand fluctuations and activity time variations. Second, we conduct simulation studies on MRP and JIT to draw out the effects of demand fluctuations and activity time variations. Demand fluctuations are further classified into demand lumpiness and demand irregularity. And, activity time variations are further classified into stationary time variations and non-stationary time variations. Experimental results show that, in terms of demand fluctuations, MRP is affected by demand lumpiness, but JIT by demand irregularity. And we also see that both MRP and JIT are influenced by stationary time variation with respect to activity time variations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.165-168
• /
• 1999

The chaotic characteristics of partial discharge(PD), may seems to be stochastic and merely random, were investigated using the method to discern between chaos and random signal, e.g. correlation integral, Lyapunov characteristic exponents and etc. For the purpose of obtaining experimental data, computer aided partial discharge detecting system was used. While this method is very different from typical statistical analysis from the point of view of a nonlinear analysis, it can provide better interpretable criterion according to the time evolution with a degradation process in the same type insulating system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.46-52
• /
• 1998

This paper presents an experimenal proof for criteria of selecting an optimum adaptive beamforming (ABF) algorithm for a large distorted phased array. A single point target embedded in clutter model is suggested to compare four well-known ABF algorithms. These algorithms are tested to low variance and high variance real data for self-calibrating a large distored phased array. It is shown that these algorithms require at least one dominant scatterer with large radar cross section (RCS) or multiple scatterers with moderate RCS in the field of view. Experimental results are provided to demonstrate the comparisons of the four algorithems in terms of gain loss and image correlaion coefficient, along with corresponding reconstructed cross-range images and range-azimuth images.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.767-770
• /
• 2001

Edge detection is one of issues with essential importance in the area of image process. An edge in image is a boundary or contour which a significant change occurs in image intensity. In the paper, we process edge detection algorithms which are based on Potts automata. The dynamical behavior of these automata is completely determined by Lyapunov operators for sequential and parallel update. If Potts Automata convergence to fixed points, then it can be used to image processing. From the generalized Potts automata point of view, we propose a Potts Automata technique for detecting edge. Based on the experimental results we discuss the advantage and efficiency.

• Journal of Korean Philosophical Society
• /
• v.126
• /
• pp.321-343
• /
• 2013

The Reformation seems to have nothing to do with modern philosophy, but in reality closely related to it. From a philosophical point of view, the Reformation had a profound effect on the formation of modern philosophy in two respects. Voluntarism, asserting the predominance of divine will over divine reason, which is the basic principle of the Reformation, allowed an arbitrary interpretation of the Bible by ignoring the tradition of the Church and emphasizing 'Sola Fide'. As a result, the severe religious disputes arose and the modern intellectuals sought a deism and natural religion as an universal religion which is expected to put an end to religious conflicts. Moreover, voluntarism changed the way of inquiring nature from the speculative to the experimental based on observation and experiment, and provided the clues of the birth of experimental philosophy (empiricism) which is the experimental inquiry of human nature. In short, the Reformation brings about the search for universal religion on the one hand, but on the other the advent of experimental philosophy. Universal religion is not a mystic religion on which the religious behaviors and practices are based but just a world view that is the basis for scientific inquiry, and it was nothing but a philosophy for science. And also the experimental philosophy was a philosophy by science in that it is a science of human nature through experiment and observation, After all, the Reformation expelled religion from the main living room of philosophy and placed science on the spot instead.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.88-94
• /
• 1999

This paper presents an accuracy evaluation method for muzzle velocity measurement systems. Among various measuring techniques, the solenoid coil scheme and the doppler radar scheme are considered due to their popularity in applications. The error sources are first identified and their effects on the accuracy of the measuring systems are quantified using mathmatical equations. The theoritic accuracy limits are then verified through comparison with experimental results. From the accuracy point of view, they turn out to be standard velocity measuring systems.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.2
• /
• pp.133-145
• /
• 1991

The essential difference between precast concrete structures and in situ concrete structures lies in the precast concrete panel structres, it is necessary to understand the bahavior of joints and their implications regarding overall structural behavior. Form such a point of view, this experimental study observes the components and joint behavior under the stress states expected of precast concrete panel structures subjected to lateral loads. 2 full-scale subassemblages were fabricated and tested. The test results show that the characteristics of horizontsl joints and wall coupling beams mainly govern the whole hahavior of P.C. structres.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1590-1594
• /
• 2007

This paper describes a case study on dynamic characteristics analysis of a 5-axis multi-tasking machine tool of ram-head typed. Natural frequency and corresponding vibration modes of the machine tool structure were obtained by using both FEM modal analysis and an experimental modal test(impulse hammer test). Both the theoretical and experiment analysis results showed good agreement with each other. Finally, some discussion and review, from the view point of resonance vibration and/or mode coupled chatter, were made based on the analysis results.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.151-155
• /
• 2005

A drug delivery system(DDS) for practically insoluble meloxicam was developed and evaluated by dissolution study. A novel DDS is two layered system, where the first layer is consisted of gas-forming agent for an immediate release and the second layer is composed of metolose SR(HPMC) for sustained release. This bilayered tablets were manufactured by using manual single punch machine. The results of dissolution study showed an initial burst release followed by sustained release for the experimental period time. From a pharmaceutical point of view, the designed DDS for meloxicam would be informative system in terms of poorly soluble analgesic medicines.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.197-203
• /
• 1996

This study is to analyze the rotordynamic effect of surface-friction- factor characteristics on an annular seal. The honeycomb geometry which shows friction-factor-jump phenomena is used in this study. A rotordynamic analysis for a contered annular seal has been developed by incorporating empirical friction-factor model for honeycomb stator surfaces. The results of the analysis for the honeycomb seal showing the friction-factor jump is compared to the non- friction-factor-jump case. The results yield that the friction-factor-jump decreasesdirect stiffness and cross coupled stiffness coefficients, and increases damping coefficient to stabilize rotating machinery in a rotordynamic point of view. The analysis of the honeyeomb seal for the friction-factor-jump case shows reasonably good compared to experimental results, especially, for cross coupled and damping coeffcients.