• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.721-730
• /
• 2005

Effects of levels of Bomboo Vinegar Liquids(BVL) on growth performance, serum profile and meat quality in employing 90 pigs were investigated. Ninety pigs were allocated into 3 groups and fed by dietary levels of BVL 0(control), 2.0 and 4.0% were included in experimental diets of each of the groups. Concentrated diet was supplemented with 2.0 and 4.0% BVL. The results showed that the daily weight gains and the feed conversion increased significantly(p<0.05) in 2.0% BVL and the feed intake increased slightly. The glucose and the cholesterol contents at the serum decreased significantly(p<0.05) in 2.0 and 4.0% BVL. On the other hand the total protein concentration and the blood urea nitrogen(BUN) increased significantly(p<0.05) in 4.0% BVL. The carcass weight increased significantly(p<0.05) in 4.0% BVL, and back fat thickness had decreased significantly(p<0.05) in 2.0 and 4.0% BVL. The carcass grade tended to increase in 2.0 and 4.0% BVL. The total fat content of loin tended to increase in 2.0 and 4.0% BVL while the cholesterol content decreased significantly(p<0.05). The pH had lower slightly in 2.0 and 4.0% BVL, the lightness and the yellowness of the meat color had higher significantly(p<0.05) while the redness decreased. Shear force values had lower significantly(p<0.05) in 2.0 and 4.0% BVL. For the fatty acid composition, the saturated fatty acids decreased significantly(p<0.05) in 2.0 and 4.0% BVL while unsaturated fatty acids(oleic acid and linoleic acid) increased significantly(p<0.05). For the sensory evaluation, 2.0 and 4.0% BVL had a significant(p<0.05) effect of diminishing the odor and improving the appearance. The taste was also significantly(p<0.05) improved. In conclusion the 2.0% BVL had a positive effect on the feeding performance, the carcass grade and the meat quality characteristics therefore 2.0% BVL is the appropriate supplemental levels of BVL for finishing pigs.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.99-108
• /
• 2010

The principal objective of this study was to investigate the cooling effects of geothermal heat pump system (GHPS) in farrowing house. A total of 96 sows were allocated to 2 pig housings (GHPS and conventional housing) with 48 for four weeks in summer season. During the experimental period of four weeks, the highest outside temperature observed was approximately $34.1^{\circ}C$, GHPS decrease indoor temperature of pig housing up to $30.9^{\circ}C$, but conventional pig housing was similar to outside temperature. Dust concentrations (maximum 61.4%) of particulate matter less than $10{\mu}m$ (PM 10) in GHPS-housing were lower than the conventional housing. GHPS showed no signigicant difference in carbon dioxide emission, whereas the ammonia gas concentration was significantly decreased in GHPS-housing compared to that of conventional housing. Sows in GHPS-housing showed significantly lower respiratory rate than those of the control group. GHPS did not affect hormone level, litter size and birth weight, but weaning weight of piglets was influenced by GHPS. Feed consumption of sows was significantly increased in GHPS-housing compared to the conventional hosing. These results suggest that GHPS decrease dust concentration, ammonia gas emission and indoor temperature of pig housing and may affect performance in sows and weaned piglets.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.73-82
• /
• 2009

The experiment was carried out from January through December in 2008 at Chungnam National University and the Unbong Animal Genetic Resources Station, NIAS. The experimental animals were twelve dairy goats (female, $30{\pm}1.8kg$), twelve Korean native Boats(female, $24{\pm}2.4kg$) and five sika deer(female, $92{\pm}5.2kg$). A total of 11 different types of hay and straw were tested in this study: such straw imported from USA in 2006 as annual ryegrass, perennial ryegrass, tall fescue and Kentucky bluegrass, and such hay imported from USA in 2007 as alfatfa, bermudagrass, timothy, kleingrass, oat and orchardgrass, and such domestic hay as mixed hay There were significant differences in chemical composition and in vitro dry matter digestibility (IVDMD) among the various types of imported hay and straw (p<0.05). Besides alfalfa hay and orchardpass hay all of the imported hay contained lower crude protein (CP) and IVDMD but contained higher neutral detergent fiber(NDF) and acid detergent fiber (ADF) than the domestic hay. According to the kinds of the imported hay, relative feed value (RFV) made the difference and the hay grades were ranged from 4 to 5, based on the RFV. According to the kinds of the imported hay, there were markedly differences in dry matte. (DM) intake and palatability ranking among dairy goats, Korean native goats, and sika deer. DM intake and palatability ranking were high in common between orchardgrass hay and bermudagrass hay, but Kentucky bluegrass straw, tall fescue straw, perennial ryegrass straw and annual ryegrass straw were proved to be very low in DM intake and palatability ranking. In conclusion, the quality and palatability among the imported hay that was tested in the study were quite variable and lower than expected. It is required to establish a better feed evaluation system for the imported hay.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.187-197
• /
• 2010

Carbon dioxide Capture and Storage(CCS) is regarded as one of the most promising options to response climate change. CCS is a three-stage process consisting of the capture of carbon dioxide($CO_2$), the transport of $CO_2$ to a storage location, and the long term isolation of $CO_2$ from the atmosphere for the purpose of carbon emission mitigation. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the $CO_2$ mixture captured from the power plants and steel making plants contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_2$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification, transport and injection processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to analyze the impact of these impurities on the whole CCS process at initial design stage. The purpose of the present paper is to compare and analyse the relevant physical property models including BWRS, PR, PRBM, RKS and SRK equations of state, and NRTL-RK model which are crucial numerical process simulation tools. To evaluate the predictive accuracy of the equation of the state for $CO_2-SO_2$ mixture, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $SO_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable physical property model with optimized binary parameter in designing the $CO_2-SO_2$ mixture marine geological storage process.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.217-226
• /
• 2009

Marine geological storage of $CO_2$ is regarded as one of the most promising options to response climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the marine geological structure such as deep sea saline aquifer. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_x$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to perform numerical process simulation using thermodynamic equation of state. The purpose of the present paper is to compare and analyse the relevant equations of state including PR, PRBM, RKS and SRK equation of state for $CO_2-N_2$ mixture. To evaluate the predictive accuracy of the equation of the state, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $N_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable equation of state and relevant binary parameter in designing the $CO_2-N_2$ mixture marine geological storage process.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• Food Science of Animal Resources
• /
• v.28 no.1
• /
• pp.27-31
• /
• 2008

This study investigated the effects of copper and zinc sources on growth performance, nutrient digestibility, carcass traits and meat characteristics in finishing pigs. Dietary treatments included 1) inorganic copper ($CuSO_4{\cdot}5H_2O$ 30ppm), 2) organic copper (Cu-methionine, 30 ppm), 3) inorganic zinc (ZnO, 80 ppm) and 4) organic zinc (Zn-methionine, 80 ppm). ZnO treatment improved the ADFI (average daily feed intake) compared to Cu-met and Zn-met treatments (p<0.05) during 5 weeks of treatment. However, during the entire experimental period, the ADG (average daily gain), ADFI and F:G ratio (feed conversion ratio) were not significantly different among the treatments (p>0.05). DM and N digestibility were not significantly different among the treatments after 5 weeks (p>0.05). At the end of the experiment, DM and N digestibility were decreased with Zn-met treatment relative to the other three treatments. The pH value of meat from $CuSO_4$ treated pigs was greater than Zn-met and ZnO treated pigs (p<0.05). Sensory evaluation was carried out for randomly selected (n = 16) paired loin samples. Meat color levels were increased (p<0.05) with Cu treatments compared to Zn treatments. $CuSO_4$ decreased the marbling of meat relative to the other treatments (p<0.05). The firmness was greater with ZnO treatment compared to Cu-met and ZnO treatments (p<0.05). These results indicate that inorganic Zn can improve growth performance, however, inorganic Cu and Zn are as effective as organic Cu and Zn at improving nutrient digestibility, carcass traits and meat quality. This form of organic additive can be friendlier to the environment than inorganic supplements.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.50-58
• /
• 2014

Due to the cost burden of new construction, the necessity of repair and retrofitting of aged structures is sharply increasing as the domain of repair and retrofitting construction is expanding. Because of the necessity, new technologies for repair and retrofitting are continuously studied in Korea and foreign countries. Steel adhesive method, fiber reinforced plastic (FRP) surface adhesive method, and external prestressing method are used to perform the repair and retrofitting works in Korea. In order to consider a repair method using steel mesh reinforced cement mortar (SMCM), 3-point flexural member test was conducted considering repair area and layer number of SMCM. Five types of specimens including ordinary reinforced concrete (RC) specimen with dimensions of $1400{\times}500{\times}200$ (mm) were cast for testing the deflection measurement, a LVDT was installed at the top center of the specimens. Also, a steel strain gauge and a concrete strain gauge were placed at the center of the specimens. A steel strain gauge was also installed on the shear reinforcement. The 3 point flexural member test results showed that the maximum load of SMCM reinforced specimen was higher than that of basic RC specimen in all of the load-displacement curves. Also, the results showed that, when the whole lower part of the basic RC specimen was reinforced, the maximum load and strain were 1.18 and 1.37 times higher than that of the basic RC specimen, respectively. Each specimen showed a slightly different failure behavior where the difference of the results was caused by the difference in the adhesive level between SMCM and RC. Particularly, in SM-B1 specimen, SMCM spalled off during the experiment. This failure behavior showed that the adhesive performance for RC must be improved in order to utilize SMCM as repair and retrofitting material.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.775-785
• /
• 1999

Background : The herbicide paraquat can cause severe lung injury and fibrosis in experimental animals. In this study we have investigated the changes in lung endothelin-1(Et-1) levels and immunohistochemical localization in relation to treatment with cyclophosphamide and methylprednisolone in paraquat induced pulmonary fibrosis in guinea pigs. Material and methods : 29 male Hartley guinea pigs were divided into 4 groups. Group I was normal control. Paraquat was instilled into the lung of guinea pig of group II, III and IV unilaterally. Group II was treated with cyclophosphamide and methylprednisolone. Group III was treated with methlprednisolone. Group IV was not treated. The degree of fibrosis was evaluated by H-E stains and Masson's trichrome stains and cell activity was assessed by Et-1 immunohistochemical stains. Statistical evaluation was performed using the Kruskawallis oneway analysis. Results : Paraquat induced an increase in numbers of fibroblasts and total amount of lung collagen in Group IV compared to the normal controls. There was no significant difference in total numbers of fibroblasts between any of paraquat instilled groups, but there was significant increase in total amount of collagen in Group IV compared to group II and III (p<0.05). The treatment of cyclophosphamide and methyprednisolone suppressed the growths of both fibroblasts and collagen, but this suppression was stastically significant only in the case of collagen Et-1 immunoreactivities of bronchial epithelium, type II pneumocytes, endothelial cells and fibroblast in group II and III were decreased compared to those in group IV. Conclusion : These results demonstrate that Et-1 is an important contributing factor in the pathogenesis of pulmonary fibrosis. Et-1 is synthesized and released by bronchial epithelium, Type II pneumocyte, endothelial cells, alveolar macrophages and fibroblasts. Especially they are associated with alveolar macrophage and fibroblasts. We conclude that combined therapy of cyclophosphamide and methylprednisolone are more effective in the control of Et-1 expression and collagen deposition.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2004

The quality and sensory characteristics of kimchi during fermentation at 15 $^{\circ}C$ were evaluated. Kimchi was prepared with Chineses cabbage which was brined in 10% salt water added dill hot-water extracts(DK) and stevia hot-water extracts(SK) respectively. The pHs and reducing sugar contents of kimchi were decreased with increasing the fermentation time whereas lactic acid(%) was increased. The pH of DK was lower than control, and the lactic acid(%) contents of DK, SK were equal or higher than control in the first stage of fermentation. Also, the reducing sugar contents of DK, SK were lower than control. These results showed that the fermentation of DK and SK were faster than that of control in the first stage of fermentation. But the lactic acid(%) contents of DK, SK were higher than control after the 12th day of fermentation. It showed that it is possible to extend the preservation of kimchi. With increasing fermentation time, the L value of kimchi juice was increased, and the a value was decreased, and the b value was constant. Especially, the a value of DK, SK was higher than control. It meant that DK, SK kept more carotenoids in kimchi than control. On the 6th day of fermentation, the sensory evaluation analyzed by ANOVA followed Duncan's multiple range test showed that the levels of the green smell and the moldy flavor of DK were significantly lower than control(p<0.05) and the levels of the green smell, the green flavor and the moldy smell of SK were significantly lower than control(p<0.05), too. And the level of overall flavor of DK, SK was higher than control. The most preference among experimental groups was SK and then control, DK. The levels of TBARS of DK, SK were generally lower than control, and the level of TBARS of DK was lower than SK.