• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.764-771
• /
• 2005

This study investigates the 3-axis transmissibility of the vehicle compact disk player's mainbase which is supported by dampers and springs. These dampers and springs as the important element ' determining the vibration performance of vehicle compact disk Player are used to minimize the vibration which is induced by driving the vehicle. In order to determine the analysis frequency band, we investigated the excitation frequency of road from the vehicle test. As the characteristics of damper and spring were changed, we carried out the vibration test and investigated the change of transmissibility, Also, we carried out the sensitivity analysis for transmissibility and we found out that the properties of damper were the dominant element in the vibration performance of vehicle compact disk player.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.198-208
• /
• 1996

The plunge joints of C.V. Joint for vehicle tend to produce a cyclic axial disturbance at a frequency of three of six times shaft speed, in which this distrubance caused by internal frictional effect is related to joint angle, rotational speed, torque, and joint size. This principal axial thrust force might make vehicle shuddered when coinciding with vehicle frequency of tranverse direction, and be one of reasons to have driver feel uncomfortable, unesay, while driving vehicle. The paper makes analysis of axial thrust force & vehicle shudder through computer simulation, comparing the result with experimental data, and reviewing the effect by changing of variables such as dimensions and driving conditions.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.496-501
• /
• 2008

Recently, many automotive companies tend to apply an air quality system (AQS), which prevents polluted air such as smoke or dust by controlling air intake actuator of vehicle, to satisfy the consumer's need for agreeable in-vehicle environment. However, performance of the traditional AQS is not satisfactory because a polluted air may enter into the inside of vehicle through the breaks of windows. Especially, the commercial vehicles such as bus or truck need to be prevented polluted air from the breaks of vehicle. Hence, as an alternative to the traditional AQS, this paper presents the architecture of smart AQS for commercial vehicle and implementation of the smart AQS. Also, the performance of the suggested system is evaluated through an experimental testbed.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.67-73
• /
• 2010

In this study, a camber angle generating mechanism for rear suspension is suggested. An experimental device is implemented and tested. A full vehicle model with camber angle generating device by using ADAMS/Car is modeled. Rear left wheel and rear right wheel have 5 different camber angles in the simulations, respectively. Step steer and pulse steer simulations are carried out for investigating the effects of vehicle handling performance due to camber angle control of rear suspension. According to the results, the camber angle of rear suspension affects the vehicle handling performance during both simulations. Therefore, when the vehicle makes the right turn or left turn, left and right wheel should have the proper orientation for improving the handling performance, respectively.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.23-29
• /
• 2011

In this study, a camber angle generating mechanism for front and rear suspension is suggested. An experimental device is implemented and tested. A full vehicle model with camber angle generating device by using ADAMS/Car is modeled. Step steer simulations are carried out for investigating the effects of vehicle handling performance due to camber angle change of front and rear wheel. According to results, the camber angle of rear suspension affects the vehicle handling performance during both simulations. Therefore, when the vehicle makes the right turn or left turn, left and right wheel of front and rear suspension should have the proper orientation for improving the handling performance, respectively.

• Smart Structures and Systems
• /
• 제13권5호
• /
• pp.755-773
• /
• 2014

The natural frequency of a bridge is an important parameter in many engineering applications such as bridge seismic design and modal-based bridge health monitoring. The natural frequency of a bridge vibrating alone may differ from that vibrating along with a vehicle. Although such vehicle-induced variability in bridge frequency is revealed in several experimental and numerical simulation studies, few attempts have been made on the theoretical descriptions. In this study, both theoretically and experimentally, the variability in the bridge frequency induced by a parked vehicle is verified, and is therefore suggested to be considered in bridge-related engineering, especially for those cases with near vehicle-bridge resonance conditions or with large vehicle-to-bridge mass ratios. Moreover, the variability ranges could be estimated by an analytical formula presented herein.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1107-1109
• /
• 1996

In this paper, we discuss the automatic recognition system of vehicle types and licence plate numbers using artificial neural networks, which will be used as vehicle identifier. We confine to expose the vehicle licence number for violating bus lane and stolen cars. Therefore, the vehicle height, width and distribution profile are used as the feature parameters of vehicle type. This system is composed of two parts: one is an image preprocessor of vehicle images and the other one is a pattern classifier by neural networks. The experimental results show that our method has good results for the recognition of vehicle types and numbers.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.429-431
• /
• 2012

Vehicle-logo recognition technology is very important in vehicle automatic recognition technique. The intended application is automatic recognition of vehicle type for secure access and traffic monitoring applications, a problem not hitherto considered at such a level of accuracy. Vehicle-logo recognition can improve Vehicle type recognition accuracy. So in this paper, introduces how to vehicle-logo recognition. First introduces the region of the license plate by algorithm and roughly located the region of car emblem based on the relationship of license plate and car emblem. Then located the car emblem with precision by the distance of Hausdorff. On the base, processing the region by morphologic, edge detection, analysis of connectivity and pick up the PCA character by lowing the dimension of the image and unifying the PCA character. At last the logo can be recognized using the algorithm of support vector machine. Experimental results show the effectiveness of the proposed method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.472-475
• /
• 2003

Electric Power Steering (EPS) mechanism has become widely equipped in passenger vehicle due to the environmental consciousness and higher fuel efficiency. This paper describes the development of co-simulation technique and simulation integration technique of EPS control system with dynamic vehicle model. A full vehicle model interacted with EPS control algorithm is concurrently simulated on a single bump road condition. Dynamic responses of vehicle chassis and steering system resulting from road surface impact are evaluated and compared with proving ground experimental data. The comparisons will show reasonable agreement on tie-rod load. rack displacement, handle-wheel torque and tire center acceleration. This developed simulation capability can be used for EPS performance evaluation and calibration as well as for vehicle handling performance integration and synthesis.

• 소음진동
• /
• 제1권1호
• /
• pp.39-43
• /
• 1991

In this study, the design concept of engine for 4WD vehicle is established by the experimental modal analysis. First, the relationships between frame and power transmission system are considered. Second, the effect of additional system (Front propeller shaft and Exhaust system) on the power transmission system is evaluated. As a result, it is desirable that of frame and power transmission system is shifted by the additional system. This is cause by the moment of inertia of the additional system, because the center of gravity location of the additional system is far from that of the power transmission system.