• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.329-335
• /
• 2004

Dog spermatozoa were recovered from the caudae epididymides of 23 domestic dogs which were 11 pure breed and 12 mix-breed dogs ranging in age from 0.6 to 3 years. The experimental designs were as follows: 1) the effect of chilling to 0. 10 or 37$^{\circ}C$. 2) the kinetics of chilling injury at 0 or 4$^{\circ}C$, and 3) the effect of sugars at $0^{\circ}C$. Viable spermatozoa were recovered by percoll gradient separation and adjusted to 5${\times}$10$^{7}$ spermatozoa/ml. In experiment 1, spermatozoa were diluted with 0.33 M glucose supplemented with 3% BSA (G-BSA) at 1:2 dilution. Spermatozoa were loaded into straws and exposed at 0, 10 or 37$^{\circ}C$ for 30 min. In experiment 2, spermatozoa were prepared as the experiment 1 and exposed for 0.5, 5, 15, or 30 min at 0 or 4$^{\circ}C$. In experiment 3, spermatozoa were diluted with different sugars (0.33 M galactose, glucose, fructose, mannitol, lactose, sucrose, raffinose) and cooled to $0^{\circ}C$ for 30 min. Sperm membrane integrity, motility and acrosome integrity were assayed after rewarming at 37$^{\circ}C$ for 5 min. Sperm motility and membrane integrity abruptly decreased with decreasing temperature but acrosome integrity gradually decreased (P<0.05). Sperm motility was more sensitive to cold shock than membrane integrity and acrosome integrity. Spermatozoa cooled to $0^{\circ}C$ were more damaged than those at 4$^{\circ}C$. Sperm motility was not different among exposed times at both. 0 and 4$^{\circ}C$. However, membrane integrity of spermatozoa exposed for 30 min at both 0 and 4$^{\circ}C$ was significantly lower (P<0.05). Spermatozoa diluted in 0.33 M fructose or galactose showed lower motility and higher morphological abnormality with coiled tail at $0^{\circ}C$. These sperm characteristics were strongly related. These results indicate that dog epididymal spermatozoa are relatively sensitive to rapid cooling and higher morphological abnormality at $0^{\circ}C$ was shown in spermatozoa diluted in fructose and galactose.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.346-353
• /
• 2011

Purpose: The peri-implant soft tissue is remodeled by the initial marginal bone resorption affecting the prognosis and esthetic result of treatment. Thus various designs on implant neck design are studied to preserve peri-implant bone. The purpose of this study is to review on the causes of initial marginal bone resorption, the configuration of peri-implant soft tissue, and the implant crestal module favorable in preserving peri-implant tissue. Materials and methods: The studies on the causes of initial marginal bone resorption and the implant crestal modules are researched and reviewed using Pubmed database. The implant crestal modules including one piece and two-piece implant, internal and external hex abutment, taper and butt joint connection, scalloped design abutment, and platform switching concept are reviewed. Results: A number of clinical and experimental studies preferred one piece implant to two-piece in preserving initial peri-implant tissue. For two piece implants, internal hex abutment and taper joint connection appear more favorable than external hex abutment and butt joint connection relatively. Controversial issues still exist on scalloped design requiring more studies on it. Although the rationale is not certain, the concept of platform switching seems favorable in preserving initial peri-implant tissue based on clinical and experimental studies. Conclusion: Each implant crestal module contains its own advantages and disadvantages with various controversial issues. In the aspect of preservation of initial peri-implant tissue, however, one-piece implant seems beneficial. In cases when two-piece implant is more appropriate due to prosthodontic concerns or any other problems, the application of platform switching concept, internal connection abutment, and taper joint connection may be favorable for the preservation of peri-implant tissues.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.60-73
• /
• 1989

Two field experiments were carried out to assess the applicability of a central composite design (CCD) in determining optimum culture condition of an early rice cultivar, Unbongbyeo in southern Korea. A central composite design with two replicates was applied to five levels of five factors such as the number of hills per 3.3m2, the number of seedlings per hill, the levels of nitrogen, the transplanting date and the seedling age (Experiment 1). The levels of planting density were ranged from 30 hills to 150 hills per 3.3m2 ; the number of seedlings per hill from 1 seedling to 9 seedlings per hill; the levels of nitrogen application from 1 kg/l0a to 21 kg/l0a; the transplanting date from June 15 to July 5; the seedling age from 25 days to 45 days. A fractional factorial design was applied to three levels of five factors tested in CCD (Experiment 2). Yield per hill and per unit area were examined and the results obtained from both experiments were compared. The benefits from the central composite design were discussed. Maximum yield of brown rice per unit area was obtained at the combination of the central levels of one of five factors when the other four factors were fixed at central point. Furthermore, brown rice yield per unit area affected by interaction of two factors was maximized at the central point when the remain three factors being fixed at the central level. The responses of five factors to brown rice yield per hill and unit area were found to be a saddle point in both designs. Actual values of the stationary points were 107 hills per 3.3 m2, 4 seedlings per hill, 10 kg nitrogen per l0a, transplanting date of rice on June 26 and 33 days of seedling age in the central composite design. Brown rice yield per unit area at the stationary points were estimated 439 kg/l0a in the central composite design and 442 kg/l0a in the fractional factorial design. Considering the number of experimental treatment combinations, the central composite design was rather convenient in reducing the number of treatment combinations for similar information. It was more convenient for an experimenter to present the results from the central composite design than those from the fractional factorial design. Considering the optimum yields of brown rice per unit area at the stationary points being verified as saddle points in both designs. inter-heterogeneity of each of the factors should be avoided in setting up factors in pursuit of inducing unidirectional response of the factors to yield. Even though both the lower and higher levels in the central composite design being beyond the region of an experimenter's interest. they were considered highly valued in interpretation of the results. Conclusively. the central composite design was found to be more beneficial to optimize culture condition of paddy rice even with several levels of various factors were involved.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.1
• /
• pp.99-106
• /
• 2009

For Exp. 1, 120 ((Yorkshire${\times}$Landrace)${\times}$Duroc) weaned pigs (7.96${\pm}$0.01 kg average initial BW, 21 days weaning) were used in a 28 d-growth assay to determine the effects of replacing soy protein concentrate (SPC) with fermented soy protein (FSP) in a starter diet (d 0 to 7) on the growth performance, apparent fecal amino acid digestibility and subsequent performance in weaned pigs. Dietary treatments included: i) FSP0 (basal diet; whey-skim milk powder-SPC based diet); ii) FSP5 (replacing SPC with 5% FSP); iii) FSP10 (replacing SPC with 10% FSP). Pigs were fed the phase I diet for 7 days, and then each group was fed a common commercial diet for 21 days to determine the effect of previous diet on subsequent performance. Average daily gain (ADG) from d 5 to 7 (linear effect, p = 0.01) and d 7 to 14 (linear effect, p<0.001) were increased as FSP level increased. The pigs fed with FSP was heavier than the pigs fed with SPC at d 5 to 7 and d 7 to 14 after weaning (p<0.05). In the entire period (d 0 to 28), there were no significant differences in weight gain and final weight between SPC and FSP diets (p>0.05). Average daily feed intake (ADFI) was higher in pigs fed with the 5% FSP diet than those fed with the other diets at d 0 to 2 post-weaning (quadratic effect, p = 0.05). Also, for the entire period of phase I (d 0 to 7), pigs consumed more 5% FSP diet compared to other treatments (quadratic effect, p = 0.03). Gain/feed (G/F) was not affected by dietary SPC or FSP in phase I and subsequent periods, but G/F from d 5 to 7 after weaning was improved linearly (p = 0.04) as dietary FSP level increased. Pigs fed with 10% FSP also improved G/F compared with those fed only SPC (p<0.05). At d 7, there were linear increments in fecal dry matter (DM) (p<0.1) and nitrogen (N) (p<0.01) digestibilities as the dietary FSP level increased. The digestibilities of fecal essential and total amino acids were increased as the FSP level increased (linear effect, p<0.1). For Exp. 2, three ((Yorkshire${\times}$Landrace)${\times}$Duroc) weaned barrows (average initial BW of 7.32 kg) were surgically fitted with a simple T-cannula approximately 15 cm prior to the ileo-cecal junction. The experimental designs were 3${\times}$3 latin squares with pigs and periods as blocking criteria. Dietary treatments and composition were the same as in Exp. 1. Apparent ileal N digestibility was increased as FSP level was increased (linear effect, p<0.05). The dietary treatments (SPC and FSP) did not affect apparent ileal DM digestibility (p>0.05). Among essential amino acids, apparent digestibility of ileal arginine (Arg), lysine (Lys), methionine (Met) and phenylalanine (Phe) were improved as the FSP level increased (linear effect, p<0.1). Also, apparent ileal total essential, non-essential and total amino acid digestibilities were increased linearly (p<0.1). In conclusion, replacing SPC with fermented soy protein appeared beneficial in growth performance, N and amino acid digestibility during the early 7 days after weaning, and an equivalent effect showed on growth performance in subsequent period of 7 to 28 days after weaning.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.325-341
• /
• 1997

One of the noticeable trends of female wear in 1990s is the Outwearization of Underwear as it is called 'Lingerie look' This trend meaned 'Exposure Fashion' raised splendidly its head to the whole stage of fashion destrying the tradional concept having divided the fashion between outwear and underwear by Madonna an Americal populer singer showed up in front of the audience wearing the corset-dress as a stage custome. This corset-dress which can not be recognised whether it is underwear or outwear has been diffused into the mass as a fashionable trend re-gardless of any reason; therefore discrimi-nation of wear by space by far that is underwear should have the sstandard telling between private and public sector has been gradually tumbled. By the way what has propelled desigers to introduce the style continuously having the underwear motive such as outwear almost as same as underwear or underwear worn on out-wear etc. and has made it a fashion trends? How do we accept this "Ligerie look'fashion" The rearch on vogue of outwearization of underwear started by the questions above can be summarized as the followings The division between the sprit and the ma-terial-economic shrinkage by the collapse of the bubble economy in the late of 20 century and expectation for the next century doubt by changes of international politics dynamics for the next century and increasement of psycho-logical tention by the environmental destruc-tion etc, has been extended to break the sense of value down These frustration of the tra-ditional values and dissatisfaction on the pres-ent have reflected on the fashion pursuing some more sensational style to increase the ex-posure of the body. The revolution of wearing bouncing the con-servatismhas outwardly expressed underwear of the private sector. Therefore the spatial concept of wear which for the public sec-tor has been fallen into pieces and has broken the wall of the concept fixed by outwear on underwear. in addition the stage costome for the popular people like Madonna has not been limited by the specularity any more and has been assimilated with the normal wear on the street to take the distinction for away. The circumstances of the late of 20 century pursuing sensation and making sex commer-cialized have accordance with the outweari-zation of underwear. there it is on the basis of Minimalist's dogmatism has been expressed the maximization of expoure in the pubric space to popularize bra pants(knickers) as outwear. The reaction on the attribute of hiding and shanding has brought 'See-Through fashion' with the transparent materials, The contemporary doubt recalling the mem-ory of the past has sublimated corset which was an instument of toture for women into Romanticism to introduce it to fashion with the development of a new material not to be a tool of any oppression and maltretment any longer. The popularization of outwear like underwear what's more has brought high quality of underwear. There it has called for the variety of materials such as knit demin and velvet etc, and has urged the famous designers to enlarge their working boundaries to underwear designs, Besides outwearization of underwear has been popular even in the Orient which has the con-servative opinions on exposure ; so changes of the thoughts can be seen among the establish-ment generation on exposure of the body. As the more high tech information publi-cized and the more technology and media digitalized the more expression being analog the pursue for the new in fashion with vision never been seen and even though it is imprac-tical the experimental designers have drived the freedom beyond the traditional roles of the previous century. Consequently outwearization of underwear may be viewd as a trial as an expression responded the contemporary background. This trend in my opinion will have been lasted for a while by being proliperlated among lasted for a while by being proliperlated among the pub-lic who has the century-end anxiety and doubt and expectation for the next century.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.288-296
• /
• 2007

Monascus pilosus (KCCM 60160) in submerged culture was optimized based on culture medium and fermentation conditions. Monacolin-K (Iovastatin), one of the cholesterol lowing-agent which was produced by Monascus pilosus may maintain a healthy lipid level by inhibiting the biosynthesis of cholesterol. Plackett-Burman design and response surface method were employed to study the culture medium for the desirable monacolin-K production. As a result of experimental designs, optimized production medium components and concentrations (g/L) were determined on soluble starch 96, malt extract 44.5, beef extract 30.23, yeast extract 15, $(NH_4)_2SO_4$ 4.03, $Na_2HPO_4{\cdot}12H_2O$ 0.5, L-Histidine 3.0, $KHSO_4$ 1.0, respectively. Monacolin-K production was improved about 3 times in comparison with shake flask fermentation of the basic production medium. The effect of agitation speed (300, 350, 400 and 450 rpm) on the monacolin-K production were also observed in a batch fermenter. Maximum monacolin-K production with the basic production medium was 68 mg/L when agitation speed was 500 rpm. And it was found that all spherical pellets (average diameter of $1.0{\sim}1.5mm$) were dominant during fermentation. Based on the results, the maximum production of 185 mg/L of monacolin-K with the optimized production medium was obtained at pH (controlled) 6.5, agitation rate 400 rpm, aeration rate 1 vvm, and inoculum size 3%.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.541-553
• /
• 2018

The purpose of this study is to explore the relationship between epistemic goals, epistemic considerations and complexity of reasoning of science high school students in an open inquiry and to explore the context on how open inquiry compares with the characteristics of an authentic scientific inquiry. Two teams were selected as focus groups and a case study was conducted. The findings are as follows: First, the contexts, such as 'sharing the value for the phenomenon understanding, reflection on the value of the research, task characteristics that require collaboration and consensus, and sufficient communication opportunities,' promote epistemic goals and considerations. On the other hand, contexts such as 'lack of opportunity for critical review of related literature and environmental constraints' lowered epistemic sides. Second, epistemic goals and considerations influenced the reasoning complexity. The goal of 'scientific sense making' led to reasoning that pose testable hypotheses based on students' own questions. The high justification considerations led to purposely focusing attention to the control designs and developing creative experimental know-how. The high audience considerations led to defending their findings through argumentation and suggesting future research. On the other hand, the goal of 'doing the lesson' and the low justification considerations led to reasoning that did not interpret the meaning of the data and did not control the limit of experiment. The low audience considerations led to reasoning that did not actively defend their findings and not suggest future research. The results of this study suggest that guidance should provide communication and critical review opportunities.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.191-200
• /
• 2012

This study was conducted to investigate the effects of application of cattle slurry on forage productivity and environmental pollution in rice paddy land. Cropping systems used in this study consisted of two designs, such as whole crop rice applied with standard fertilizer (MWRS) and whole crop rice applied with cattle slurry (MWRC). The field experiments were conducted on the clay loam at Backsanmyun, Kimje, Chunlabukdo province in Korea for three years (May 2006 to Apr. 2009). This study was arranged in completely randomized design with three replicates. The yield of dry matter of whole crop rice in MWRS was similar as compared with that of MWRC. The contents of crude protein of whole crop rice in MWRS significantly increased as compared with those of MWRC (P<0.05). However, the contents of acid detergent fiber (ADF), neutral detergent fiber (NDF) and total digestible nutrients (TDN) of whole crop rice were hardly influenced by cattle slurry application. The pH, and contents of T-N, $P_2O_5$ and organic matter (OM) in soil samples collected at the end of the experiment increased as compared with those at the beginning of the experiment. After the end of experiment, the concentrations of exchangeable cations (Ca, Na, Mg and K) in soil samples collected at the end of the experiment were remarkably higher than those at the beginning of the experiment (P<0.05). The concentrations of $NO_3$-N and $NH_4$-N in discharge water in MWRS, MWRC and DWBRC were higher in 2008 than those in 2007. But the concentration of $PO_4$-P in discharge water was hardly influenced by the cropping system during experimental period. The concentrations of $NO_3$-N, $NH_4$-N and $PO_4$-P in leaching water were hardly influenced by application of cattle slurry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.753-759
• /
• 2007

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress under unilateral loading specially. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs under unilateral loading, using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1: Clasp-retained mandibular removable partial denture with unsplinted abutments Group 2: Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge. Group 3: Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm dose to the abutments. Two unilateral vertical experimental loadings (30N and 100N) were applied subsequently via miniature load cell that were placed at mandibular left first molar region. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Tukey test was used as post hoc comparisons. Results. The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Strain values increased as the applied load in increased from 30N to 100N (p<.05) except for right side in group 1. Under 30N loading, in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 100N loading in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 30N loading, group 2 and 3 showed higher strain values in right side than in left side. Under 100N loading, right side strain values were higher than left side ones for all groups. Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments under unilateral loading. Bar-retained removable partial denture showed the lowest strain of three groups, and compressive nature.