• 한국경영과학회지
• /
• 제15권1호
• /
• pp.63-72
• /
• 1990

This problem in this paper concerns the determination of safety stock for multi-echelon invenetory system. In this model the criterion is to minimize system safety stock subject to a service level constraint and expected annual total cost. Then, safety stock is determined by minimizing expected annual total cost and satisfying given service level. This expected annual total cost is obtained by expected total inventory holding cost plus the expected total stockout cost. Numerical example is given in a three-echelon inventory system. The results obtained by the use of the Hill Algorithm.

• 한국농공학회논문집
• /
• 제49권6호
• /
• pp.93-101
• /
• 2007

In general, geotechnical properties have many uncertain aspects, thus probabilistic analysis have been used to consider these aspects. It is, however, quite difficult to select an appropriate target probability for a certain structure or construction process. In this study, minimum expected cost design method based on probabilistic analysis is suggested for design of vertical drains generally used to accelerate consolidation in soft clayey soils. A sensitivity analysis is performed to select the most important uncertain parameters for the design of vertical drains. Monte Carlo simulation is used in sensitivity analysis and probabilistic analysis. Total expected cost, defined as the sum of initial cost and expected additive cost, varies widely with variation of input parameters used in design of vertical drain systems. And probability of failure to get the minimum total expected cost varies under the different design conditions. A minimum value of total expected cost is suggested as a design value in this study. The proposed design concept is applicable to unit construction process because this approach is to consider the uncertainties using probabilistic analysis and uncertainties of geotechnical properties.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.11-18
• /
• 1989

A one-upper level warehouse n-Iower level retailer inventory distribution model is discussed. This paper presents the parallel-type inventory structure using an order-up-to-level invertory control system for analyzing the approximation of the expected units back ordered and the measure of service. We find that the total expected backorder units in system can substitute the expected back orders in the last two periods for the expected back orders in total periods. The rate of total expected back orders which is the measure of disservice, is given by dividing the improved units of total expected backorder into the total demand during an order cycle. The average annual total cost in system is obtained by considering the results, but from the viewpoint of this study the cost analysis is not described.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.33-39
• /
• 1998

This paper is related to economic design of tool-resetting period in NC machining. In NC lathe machining, the mean and variance of components dimension fluctuate in slow time and we should reset tool program to compensate the variation from the fluctuation. In this paper. we propose the procedure determining the optimal resetting period based on the total expected operating cost which consists of resetting cost and the quality cost related to dimension variation. As a case study, using experimental data about dimension changes of a lathe machining, we obtain the regression equations of mean and variance of the dimension fluctuation, total expected operating cost, and optimal resetting period.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권3호
• /
• pp.195-203
• /
• 2006

This paper deals with cost analysis model in periodic maintenance policy. The repair policy with minimal repair is considered as follow : as the occurrence of failure between minimal repair and periodic interval time, unit is replaced by a new unit before the periodic maintenance time comes. Then total expected cost per unit time is calculated according to time delta t in a view of customer's. The total expected costs are included repair and usage cost : operating, fixed, minimal repair, periodic maintenance and new unit expected cost. Numerical example is shown in which failure time of item has Normal distribution.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권2호
• /
• pp.57-66
• /
• 2012

In this paper, we consider the periodic preventive maintenance model for a repairable system following the expiration of replacement-repair warranty. Under this preventive maintenance model, we derive the expressions for the expected cycle length, the expected total cost and the expected cost rate per unit time. Also, we determine the optimal preventive maintenance period and the optimal preventive maintenance number by minimizing the expected cost rate per unit time. Finally, the optimal periodic preventive maintenance policy is given for Weibull distribution case.

• International Journal of Reliability and Applications
• /
• 제12권2호
• /
• pp.117-122
• /
• 2011

In this paper, we suggest the optimal replacement policy following the expiration of repair warranty when the cost of minimal repair depends on the age of system. To do so, we first explain the replacement model under repair warranty. And then the optimal replacement policy following the expiration of repair warranty is discussed from the user's point of view. The criterion used to determine the optimality of the replacement model is the expected cost rate per unit time, which is obtained from the expected cycle length and the expected total cost for our replacement model. The numerical examples are given for illustrative purpose.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.216-223
• /
• 1993

The safety factors of current standard code are considered to be not appropriate compared to design and construction practices, even this safety factors are not determined from probabilistic study but merely from experiences and practices. This study pripose the optimum safety indices based on expected total cost minimization using only three parameters, which are the level of the failure cost to the initial cost by improvement in safety, and the order of the initial cost function.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.135-143
• /
• 1999

This paper discusses an optimal burn-in procedure to minimize total costs based on the assumption that the failure rate pattern follows a bimodal mixed Weibull distribution. The procedure will consider warranty period as a factor of the total expected bum-in cost. A cost model is formulated to find the optimal burn-in time that minimizes the expected burn-in cost. Conditional reliability for warranty period will be discussed. An illustrative example is included to show how to use the cost model in practice.

• Communications for Statistical Applications and Methods
• /
• 제6권3호
• /
• pp.719-728
• /
• 1999

This paper discusses an optimal burn-in procedure to minimize total costs based on the assumption that the failure rate pattern follows a bimodal mixed Weibull distribution. The procedure will consider warranty period as a factor of the total expected burn-in cost. A cost model is formulated to find the optimal burn-in time that minimizes the expected burn-in cost. Conditional reliability for warranty period will be discussed. An illustrative example is included to show how to use the cost model in prctice.