• 한국항해학회지
• /
• 제12권3호
• /
• pp.1-21
• /
• 1988

A Satellite -aided search and rescue system is expected for its many advantage of global coverage, instantaneousness and low cost. In this paper, a calculation method is proposed , by which a position of distress can be determined with doppler frequency received through an orbital satellite. First, an algorithm and program is developed for calculating the position of distress with the received doppler frequency of EPIRB(Emergency Position Indicating Radio Beacon) with the least square method. Then, position error caused by the drift of the transmitting frequency is evaluated. The evaluation is made by the simulation using NNSS satellite orbital elements and varying position of EPIRB, numbers of Doppler data and magnitudes of various errors. As the result, the availability of this program for a satellite-aided search and rescue system is confirmed and the bounds of expected positioning accuracy is clarified.

• Wind and Structures
• /
• 제34권6호
• /
• pp.469-482
• /
• 2022

The generalized extreme value distribution (GEVD) is frequently used to fit the block maximum of environmental parameters such as the annual maximum wind speed. There are several methods for estimating the parameters of the GEV distribution, including the least-squares method (LSM). However, the application of the LSM with the expected order statistics has not been reported. This study fills this gap by proposing a fitting method based on the expected order statistics. The study also proposes a plotting position to approximate the expected order statistics; the proposed plotting position depends on the distribution shape parameter. The use of this approximation for distribution fitting is carried out. Simulation analysis results indicate that the developed fitting procedure based on the expected order statistics or its approximation for GEVD is effective for estimating the distribution parameters and quantiles. The values of the probability plotting correlation coefficient that may be used to test the distributional hypothesis are calculated and presented. The developed fitting method is applied to extreme thunderstorm and non-thunderstorm winds for several major cities in Canada. Also, the implication of using the GEVD and Gumbel distribution to model the extreme wind speed on the structural reliability is presented and elaborated.

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.161-165
• /
• 2001

We have developed a position-sensitive proton recoil telescope (PSPRT) which employs a position-sensitive photomultiplier (PS-PMT) and a scintillator for both a radiator and a proton-detector. This system is expected to achieve high energy resolution under a large solid angle, because it enables to obtain the information not only on the proton energy but also the recoil angle from the position data for both detectors. The response of the PSPRT for 14.1 MeV mono-energetic neutrons was measured, and the PSPRT proved to be operating as expected.

• 대한전기학회논문지
• /
• 제41권6호
• /
• pp.625-632
• /
• 1992

This paper presents a new dc-motor position control approached by Variable Structure System. In order to eliminate a steady-state position error, we propose a switching function composed of position error, velocity, and current ripple. The switching function has an advantage compared to other ones. To determine the control signal voltage, we use a fuzzy logic method. The simulation results show expected performances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.779-782
• /
• 1997

In this paper, accurate position control of a stenciling robot manipulator is designed. The stenciling robot is requried to draw lines and characters on the pavement. Since the robot is huge and heavy, the inertia is expected to play a major role in the tracking performance as desired. Here we are proposing neural network control scheme for a computed-torque like controller for the stenciling robot. On-line compensation is achieved by neural network. Simulation studies with stenciling robot are carried out to test the performance of the proposed control scheme.

• Journal of Periodontal and Implant Science
• /
• 제32권2호
• /
• pp.361-370
• /
• 2002

The aim of this study was to analyze various data of 120 non-submerged ITI implants placed in 64 korean adults. The data were retrieved from patients' charts and registered in the computer and coded for a statistical analysis. The results revealed that the most common type of edentulism was a distal extension case, and the largest number of implants were placed in the mandibular first molar position. Implants were placed more frequently in mandibular, posterior position than maxillary, anterior position, respectively. With respect to the implant diameter and length, an implant with 4.1mm in diameter and more than 10mm in length was the most common. Since a molar position was the most prevalent position for implant placement in korean patients, clinicians should be careful about implant diameter which can resist a strong occlusal force expected in the molar position. In addition, the distance to the mandibular canal and the floor of maxillary sinus should be considered to avoid possible damages, such as nerve injury and sinus perforation in selecting a proper implant length.

• 한국항해항만학회지
• /
• 제28권8호
• /
• pp.653-657
• /
• 2004

이 논문은 자유자이로의 방향보존성을 이용하여 위치를 결정하는 방법을 이론적으로 유도한 것이다. 즉, 임의 위치에서 두 대의 자유자이로 회전축의 경사각과 기준 위치로부터 측정한 경과 시간을 기본 요소로 하여 위치를 결정하는 시스템을 제시하고 이 시스템을 구축할 때 나타나는 문제점을 열거하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.613-617
• /
• 2009

3D-QSARs for the inhibition activities against protox by herbicidal 2-N-phenylisoindolin-1-one derivatives were studied quantitatively using CoMFA and CoMSIA methods. The result of the statistical quality of optimized CoMSIA model 2 ($FF:\;{r^2}_{cv.};\;0.973\;&\;{r^2}_{ncv.};\;0.612$) was higher than that of CoMFA model 1 ($AF:\;{r^2}_{cv.};\;0.414\;&\;{r^2}_{ncv.};\;0.909$). Also, the relative contribution of the optimized CoMSIA model 2 showed the steric (24.6%), electrostatic (31.0%), hydrophobic (ClogP, 23.4%) and H-bond acceptor field (21.0%), respectively. From the results of the contour maps, the protox inhibition activities are expected to increase when steric favor and H-bond acceptor favor groups are substituted on $R_2$ position and positive favor group are substituted on $C_2,\;C_3,\;and\;C_5$ atom in phenyl ring of $R_2$ position. And the inhibition activities are expected to increase when hydrophobic favor group is substituted on $C_1,\;C_3$ atom in phenyl ring of $R_2$ position and $C_1$ atom of $R_2$ position and hydrophilic favor groups are substituted on $C_4$ atom in phenyl ring of $R_1$ position and the terminal group of $R_1$ position.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.756-761
• /
• 2013

This paper propose the new demodulation method that can detect resolver signal's peak at the time of position estimation when the position information is required during current controller period. The proposed method is performed in a synchronous demodulation way with exciting signal and also cover a capability which can compensate the lag element of exciting signal caused by the resolver's inductive component and filter circuit. This paper carried out the experiment to investigate the validity and performance of the suggested method by using the test board made up of DSP and demodulation circuit. The test results show that the proposed method is theoretically clear and work completely as expected from making sure of sampling resolver signal's peak at the time of position estimation. In addition, Software position tracking algorithm is executed with the demodulated signals generated by the suggested method and an exact position can be estimated.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.293-296
• /
• 1999

In conventional automatic container-terminal, the gantry cranes are operated manually or semi-automatically. But UGC is an unmanned-operated gantry crane and the positioning information for UGC is supplied only by position-measuring devices. In order to enhance the operation efficiency of UGC, it is required that the position-measuring devices have long maintenance period and are not sensitive to the weather and environment condition. And in order to be used practically in container terminal, the cost of position-measuring devices is not higher than currently used measuring devices. In the study, it is discussed the requirements for position-measuring devices in UGC, And it is studied on the measuring devices suitable to UGC. From this study, it is expected that the combination of a rotary encoder and a ferrous metal detector is useful for position-measuring devices in UGC.