• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.10
• /
• pp.13-26
• /
• 1993

Motion picture algorithms are realized on the multiprocessor system presented in the Study I. For the most efficient processing of the algorithms, pipelining and geometrical parallel processing methods are employed, and processing time, communication load and efficiency of each algorithm are compared. The performance of the implemented system is compared and analysed with reference to MPEG coding algorithm. Theoretical calculations and experimental results both shows that geometrical partitioning is a more suitable parallel processing algorithm for moving picture coding having the advantage of easy algorithm modification and expansion, and the overall efficiency is higher than pipelining.

• Journal of the Korean Institute of Educational Facilities
• /
• v.2 no.2
• /
• pp.41-50
• /
• 1995

The large increase in the number of students and the current rapid social change requires the expansion of educational facilities for the improvement of the educational content and its method, the usefulness of educational media, and the improvement of teaching and learning activities. The educational facilities have largely served is done efficiently and it results in a functional harmony of these two aspects. In order to maximize this harmony, and thus maximize the efficiency of school education, we must analyze the human engineering factors of educational facilities through human being that is the main subject of education, humans. Therefore to maximize the efficiency of school education, we must analyze the human engineering factors of educational facilities through human being that is the main subject in learning and living. In Conclusion we suggest the following six analying standards on human engineering of educational facilities; 1. adequacy 2. suitability 3. healthfulness 4. safety 5. beauty 6. modernity.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.55-60
• /
• 2015

Recent engine development has focused mainly on the improvement of engine efficiency and output emissions. The improvements in efficiency are being made by friction reduction, combustion improvement and thermodynamic cycle modification. Computer simulation has been developed to predict the performance of a spark ignition engine. The effects of various cylinder pressure, heat release, flame temperature, unburned gas temperature, flame properties, laminar burning velocity, turbulence burning velocity, etc. were simulated. The simulation and analysis show several meaningful results. The objective of the present study is to develop a combustion model for a spark ignition engine running with isooctane as a fuel and predicting its behavior.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.10
• /
• pp.733-738
• /
• 2012

It is important issue to reduce the electric energy to save the operating cost of HVAC system. Even if electrical energy is the clean energy, it is difficult and takes high cost for storage of electricity. These cause the high peak load of electric energy for HVAC in summer season. In korea, government impose the electric charge with several grade for the purpose of cut-off the peak load of electricity. Government has a policy to support to design and install the heat/ice storage system using midnight electricity. In this study, analysis of cooling load and operating characteristics for ice storage system are performed. And, also economical efficiency is compared between ordinary charge system of electricity and midnight rate charge of electricity. The systematic and economical supports are needed for expansion of usage of energy saving equipments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.39-46
• /
• 1993

In this paper, an offset paraboloidal reflector antenna satisfied efficiency of over 60% and sidelobe envelope line of 29-25$log\theta$ was designed and manufactured for Ku-band VSAT(Very Small Aperture Terminal) antenna. The radiation patterns of experimental antenna were computed by applying the series expansion method using the Zernike polynomials. The measured patterns are in good agreement with the computed results. The Gain, efficiency, and sidelobe envelop line fairly well satisfy the design specifications except first sidelobe level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1082-1091
• /
• 2004

Analyzed Parametrically was an internal combustion engine combined with gas turbine the cycle of which is splitted into compression side cylinder and expansion side one, and heat adding of which is during constant volume pressure, temperature process. The advantages of each measures were analyzed by means of thermal cycle diagram. The thermal efficiency of partial load cutting off firstly isothermal heat adding and secondly isobaric heat adding also was analyzed The authors suggested some potentials about the performance as for thermal efficiency, mean effective pressure and reducing emissions and noise supposed were the operating parameter of the engine set to some values and were some problems solved.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.430-435
• /
• 1992

Hazard identification is one of the most important task in process design and operation. This work has focused on the development of a knowledge-based expert system for HAZOP (Hazard and Operability) studies which are regarded as one of the most systematic and logical qualitative hazard identification methodologies but which require a multidisciplinary team and demand much time-consuming, repetitious work. The developed system enables design engineers to implement existing checklists and past experiences for safe design. It will increase efficiency of hazard identification and be suitable for educational purposes. This system has a frame-based knowledge structure for equipment failures/process material properties and rule networks for consequence reasoning which uses both forward and backward chaining. To include wide process knowledge, it is open-ended and modular for future expansion. An application to LPG storage and fractionation system shows the efficiency and reliability of the developed system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.1
• /
• pp.66-71
• /
• 2001

In the air-conditioning industry, the refrigerant charging amount is one of the most important parameters affecting the energy efficiency ratio of heat pumps. An experimental study was performed on the characteristics of an inverter driven air-to-air heat pump system with a variation of compressor frequency and charging amount of refrigerant. The frequency was altered from 40Hz to 70Hz and the charging amount was changed from 1.6kg to 2.8kg in tests. The variation of performance was measured with switching of the expansion valve on each frequency and charging amount. All the tests were performed at the Korean Standard and test conditions of the air conditioners. As results, it was found that there existed the charging amount and the level of the suction gas superheat which provided the highest energy efficiency ratio at all the frequency bands.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.483-484
• /
• 2006

This paper introduces an improved surface matching algorithm that can be used to reconstruct the surface topography of an object that is scanned from multiple overlapping regions by an AFM. The essence of the image matching technique is stitching two neighboring images intentionally overlapped with each other. To enhance the computational efficiency, this paper introduces a pyramid matching algorithm which makes use of reduced images for primary images. The results show that the proposed image pyramid matching algorithm is useful fer enhancing the computational efficiency.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1981-1983
• /
• 1998

The principle of the MHD generation is based on Faraday's law of induction that a eletromotive force(u ${\times}$ B) is generated when the working gas of velocity u flows a channel in which magnetic field of strength(B) exists. In MHD power generation system, enthalpy of the working gas is converted to electric power directly through expansion in generator channel. It means that electric power can be generated without moving mechanical linkage such as turbine blades. There are two types in the MHD generator; linear type Faraday and disk type hall generator. Disk type hall generator is the main target of this paper. Isentropic efficiency and enthalpy extraction rate of disk type shock tube driven hall generator is discussed here.