• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.5
• /
• pp.382-388
• /
• 2003

Refrigerant flow rates of the multi-type air-conditioning system can be regulated by electronic expansion valves (EEV). The performance of the multi-type air-conditioning system may be improved by lowering the superheat at the compressor suction side. In this study, a superheat temperature setpoint reset algorithm was developed by using fuzzy logics, and a PI algorithm was applied to control the superheat temperature near setpoints. Experimental results showed energy savings and stable operations at a multi-type air-conditioning system. Therefore, the developed setpoint reset algorithm may be effectively used for the EEV superheat temperature control of the multi-type air-conditioning system.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.50-55
• /
• 2015

We report design and simulation of a two-dimensional (2D) silicon-based nanophotonic crystal as an optical insulator to enhance the light emission efficiency of light-emitting diodes (LEDs). The device was designed in a manner that a triangular array silicon photonic crystal light insulator has a square trench in the middle where LED can be placed. By varying the normalized radius in the range of 0.3-0.5 using plane wave expansion method (PWEM), we found that the normalized radius of 0.45 creates a large band gap for transverse electric (TE) polarization. Subsequently a series of light propagation simulation were carried out using 2D and three-dimensional (3D) finite-difference time-domain (FDTD). The designed silicon-based light insulator device shows optical characteristics of a region in which light propagation was forbidden in the horizontal plane for TE light with most of the visible light spectrum in the wavelength range of 450 nm to 600 nm.

• International Commerce and Information Review
• /
• v.4 no.1
• /
• pp.1-19
• /
• 2002

Emerging digital economy, e-business, especially business to business(B2B) electronic commerce is understood one most single critical competitive weapon for organizations' global competitiveness. According to government white paper, Korea's electronic commerce records expansion stage in its volume and variety. Although Korea has remarkable EC records, still some differences are existed compare to the developed countries. IT in the developed countries, played an engine for the economic restructuring as well as for the economic growth. But in Korea, it's not fully utilized by the reasons of economic and noneconomic bottlenecks. Under the digital economic surroundings, EC or e-Business, is a business system to achieve the economic efficiency in the levels of an organization as well as a nation. So, we have to find the ways to utilize our EC infrastructure to contribute for the nation's global competitiveness. To find the way, this study recommends two types of policies, pull and push, beyond the OECD's suggestion, to government in order to expansion of EC, especially B2B EC.

• Electrical & Electronic Materials
• /
• v.10 no.6
• /
• pp.528-532
• /
• 1997

The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for SOFC, by the way, Ni-YSZ materials are used as anode of SOFC widely. So in this experiments, we investigated the optimum content of Ni, by testing expansion coefficient, impedance characteristics, overvoltage. As a result, the performance of Ni-YSZ anode(40vol%) was better excellent than the others.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.11
• /
• pp.883-889
• /
• 2014

Mufflers have been widely used in the exhaust system to reduce the noise. However, installing muffler may deteriorate the efficiency due to the increase of back pressure. Mufflers usually consist of partition plates and perforated holes in a expansion chamber. In this paper, the influences of the location of the partition and hole on the acoustic TL and back pressure were examined. The acoustic TL was predicted using virtual lab commercial software, while the back pressure were predicted using CFX commercial software. The results were used to set up a database for finding their trends. The optimal muffler model in user-interested frequency range could be selected by analyzing this database.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.3
• /
• pp.100-106
• /
• 2009

As an effort to prevent environmental problems caused by ozone depletion and global warming, alternative refrigerants are being developed, and one of the candidates is carbon dioxide. To overcome slightly low efficiency of $CO_2$ refrigeration system, air-conditioning cycle using an ejector was suggested. Ejector compensates throttling loss in an expansion device by reducing compression work. In this study, the ejector refrigeration cycle using $CO_2$ as a refrigerant is investigated to understand the effect of the mixing section diameter and refrigerant charge amount on the performance. If mixing section diameter is too large or too small, either cases show low performance. The optimum refrigerant charge amount which gives the best performance is found for standard operating conditions. The air-conditioning cycle was analyzed for several operating conditions.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.3
• /
• pp.216-228
• /
• 2021

In the present study, the performance of a floating oscillating water column (OWC) device has been studied in regular waves. The OWC model has the shape of a hollow cylinder. The linear potential theory is assumed, and a matched eigenfunction expansion method(MEEM) is applied for solving the diffraction and radiation problems. The radiation problem involves the radiation of waves by the heaving motion of a floating OWC device and the oscillating pressure in the air chamber. The characteristics of the exciting forces, hydrodynamic forces, flow rate, air pressure in the chamber, and heave motion response are investigated with various system parameters, such as the inner radius, draft of an OWC, and turbine constant. The efficiency of a floating OWC device is estimated in connection with the extracted wave power and capture width. Specifically, the piston-mode resonance in an internal fluid region plays an important role in the performance of a floating OWC device, along with the heave motion resonance. The developed prediction tool will help determine the various design parameters affecting the performance of a floating OWC device in waves.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.138-143
• /
• 2011

Until now, measures for energy saving in buildings have been tried. Because particularly the role of buildings area is very important for implementing national greenhouse gas reduction targets and Green growth. But, lack of business linkages between each sector or the interest and participation of private sector are not enough. In addition, relevant personnel to do had not been systematized. It is expected that certification services will be increased according to the activation of Building Energy Efficiency Rating System and expansion of the target buildings so Government must be prepared to expand of certification system by training Professional staff. In this study, the basic data for the introduction of obligation of Building Energy Efficiency Rating System is suggested through analysis of the operating and laws system of Building Energy Efficiency Rating System along with efforts of Government for diffusion low energy buildings.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.353-363
• /
• 2021

This study analyzed to provide information for business improvement by analyzing the management efficiency of start-up investment companies so that startup investment companies can operate efficiently and by presenting information on inefficient factors. From 2014 to 2018, 83 start-up investment companies were analyzed using the DEA model. Input variables were he number of employees, capital, and output variables were selected for start-up investment assets, operating income, and net profit. As a result of the analysis, technical efficiency and pure technical efficiency showed a pattern with an increase in average, but scale efficiency repeatedly increased and decreased. It is believed that the decline in technology efficiency was due to the decrease in pure technology efficiency, and the inefficiency of start-up investment companies seems to have influenced the inefficiency of start-up investment companies rather than the inefficiency of scale. In addition, the size revenue shows that the DRS value is gradually decreasing, and the IRS value is generally increasing. It is believed that efficiency can be improved if operational inefficiency is improved based on the results and efficiency measures are established through scale expansion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.936-944
• /
• 2003

In this paper, we propose an AND/XOR-based technology mapping method for field programmable gate arrays (FPGAs). Due to the fixed size of the programmable blocks in an FPGA, decomposing a circuit into sub-circuits with appropriate number of inputs can achieve excellent implementation efficiency. Specifically, the proposed technology mapping method is based on Davio expansion theorem to decompose a given Boolean circuit. The AND/XOR nature of the proposed method allows it to operate on XOR intensive circuits, such as error detecting/correcting, data encryption/decryption, and arithmetic circuits, efficiently. We conduct experiments using MCNC benchmark circuits. When using the proposed approach, the number of CLBs (configurable logic blocks) is reduced by 67.6% (compared to speed-optimized results) and 57.7% (compared to area-optimized results), total equivalent gate counts are reduced by 65.5 %, maximum combinational path delay is reduced by 56.7 %, and maximum net delay is reduced by 80.5 % compared to conventional methods.