• 한국항만학회지
• /
• 제12권1호
• /
• pp.47-53
• /
• 1998

Presently, it was faced with serious social problems as traffic accident, parking violation & traffic congestion due to change of industrial structure, expansion of economic volume, elevation of national life level and rapid motorization. Accordingly, the study is research to improve immidiate transportation problems which could be establish the rating model about consideration degree of evaluation factor based on MDPREF's method in connection with Intelligent Transportation System(ITS)

• IMMUNE NETWORK
• /
• 제1권1호
• /
• pp.87-94
• /
• 2001

목적 : 제대혈의 조혈모세포 체외확장 시 조혈세포 증폭과 더불어 조혈미세환경의 변화가 일어난다. 이때 제대혈 $CD34^+$ 세포에서 유래되는 지지세포의 계열 분석조혈성장인자 분비능력을 알아보고 지지세포 증식 조건을 확립하여 효과적인 제대혈의 체외증폭을 제시하고자 하였다. 방법 : 제대혈부터 $CD34^+$ 세포를 분리하여 실험에 사용하였다. 무혈청배지에서 각종 조혈성장인자를 다양한 조합으로 첨가하여 배양하였고 증식정도는 현미경으로 관찰하여 배양용기를 점유한 면적 비율로 계산하였다. 세포외간질 단백의 효과를 분석하기 위하여 collagen S, fibronectin, laminin 및 poly-L-ly sine를 미리 coating한 용기에 배양하여 분석하였다. 제대혈 $CD34^+$ 세포를 조혈성장인자의 첨가 없이 3주간 액체배양하였다. 배양 시, 1주, 2주 및 3주에 상층액을 얻어 $-80^{\circ}C$에 보관하였다가 한꺼번에 IL-3, IL-6, GM-CSF, IL-$1{\beta}$ 및 TNF-$\alpha$등을 ELISA 방법으로 내부적으로 분비되는 량을 측정하였다. 분화된 지지세포의 계열을 분석하기 위해 E-selectin, VCAM-1, ICAM-1, PECAM-1, vWF, vimentin 및 CD 14 항체를 이용하여 면역화학염색 후 형광현미경으로 관찰하였다. 결과 : 제대혈 $CD34^+$ 세포 체외증폭시키는 과정에서 배양 4일에 지지세포가 출현하기 시작하여 7-10일이 지나면서 증식하기 시작하였고 14-2 1일 경에 서로 뭉치는 양상을 보여주었다. 제대혈 $CD34^+$ 세포 배양하면서 내부적으로 분비되는 GM-CSF, IL-6의 측정치는 시간이 지남에 따라 증가되었다. 제대혈 $CD34^+$ 세포 체외확장 시 지지세포의 증식 정도는 TPO+FL+SCF+LIF의 조합의 조혈성장인자가 첨가되었을 때 그리고 세포외간질 단백 성분 중 1% poly-L-lysine으로 처리한 경우 가장 효과적이었다. 결론 : 체외 증폭시 제대혈 $CD34^+$ 세포로부터 지지세포가 나타났으며 적절한 조혈성장인자의 첨가나 세포외간질 단백의 첨가에 의해 증폭될 수 있다.

• 한국정보통신학회논문지
• /
• 제6권4호
• /
• pp.616-623
• /
• 2002

삼각형 마이크로스트립 패치를 기본으로 프랙털 확장시킨 삼각형 프랙털 안테나(Triangular Fractal Antenna)를 제안한다. TFA의 기본모드와 고차모드에 대한 공진주파수를 스케일링 인자 (scaling factor)를 변화시켜 조절한다. 스케일링 인자의 변화에 따라 공진주파수가 확산 혹은 집중되는 현상을 보인다. 각 프랙털 패치(fractal patch)에서 공진되는 주파수들은 대수 주기적으로 나타난다 이 논문에서 제안된 삼각형 프랙털 안테나는 다중대역 특성을 갖는 시스템에 적용 가능하다.

• 대한전기학회논문지
• /
• 제40권7호
• /
• pp.690-695
• /
• 1991

The ability to linearize a nonlinear system by feedback and coordinate change reduces to finding an integrating factor for a one-form which is determined from the system dynamics. Utilizing Taylor series expansion of this one-form, we characterize approximate linearizabilitu. A constructive method is derived for approximate linearization up to order 2.

• 한국환경과학회지
• /
• 제33권3호
• /
• pp.193-203
• /
• 2024

This study aims to determine the factors affecting the level of satisfaction with the Cell Broadcast Service (CBS) among citizens in Incheon. Partial least squares (PLS) regression, instead of multiple regression, was used for the analysis because it can solve multicollinearity and sample size issues. The analysis results are as follows: The factor with the greatest effect on satisfaction with CBS among Incheon citizens, was the elimination of redundancies (VIP=1.185). Therefore, local governments, government agencies, and public organizations must coordinate their ideas and collectively create guidelines to eliminate redundancies. The second most influential factor was the expansion in the broadcast medium from legal, institutional, and policy aspects (VIP=1.087). This is because differences in generation, age, gender, and personal characteristics were not considered. Therefore, it is necessary to devise a customized messaging tool through the expansion of broadcast media. The broadcast criteria of the legal, institutional, and policy perspectives comprised the third most influential factor, with a high VIP value of 1.053. Consequently, it is essential to devise a plan to avoid distributing unnecessary cell broadcast services, by establishing criteria for areas and sections, time, and the direct and indirect impact zones of a disaster. In the future, this study could be used as base data to develop policies, guidelines, and response measures for Incheon CBS. Given the lack of research on the diverse characteristics of each social class and the city traits of each region, and a lack of concrete empirical research on each factor, continuous and in-depth studies are required in the future.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.333-336
• /
• 2015

Recently, the power load is growing larger and because of the environmental limitation of generation, the expansion of generation facilities are becoming more difficult. For that reason the importance of the demand-side resources come to be higher. One method of the demand-side resource, the DLC Program, has executed, and moreover, the loads which are available to be controlled are increasing. It should be considered of some kinds of power system components such as DLCs, because the fact that using the demand resources will be an important part of the power system. This paper considers the power factor of the load-bus which is shedded in the direct load control program. and then analyze the power system using flow sensitivity and voltage sensitivity. In this paper, we assumed two scenarios through the rank of the load power factor at each bus and to compare and evaluate each case, we used Power World for the simulation.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.54-60
• /
• 2016

The valve used in nuclear power plant must be qualified but the limitation of the test facility leads to use the numerical analysis. The flow coefficient is calculated with the consideration of the pressure, velocity and geometry. And the flow coefficient is the important physical property which is prepared using experiment or analysis by valve manufacturer. In this study, the analysis model was made according to ISA 75.02.01 and the mass flow rate and pressure drop ratio was calculated. The model of the expansion factor was applied to the simulation result and the pressure drop ratio at the start of the choked flow in the valve was found. With the simulation result, the consideration was performed that the expansion factor is the important physical property to the system engineer in addition to the flow coefficient.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1844-1852
• /
• 2001

Recent developments in microfluidic devices based on microelectromechanical systems (MEMS) technique find many practical applications, which include electronic chip cooling devices, power MEMS devices, micro sensors, and bio-medical devices among others. For the design of such micro devices, flows characteristics inside a microchannel have to be clarified which exhibit somewhat different characteristics compared to conventional flows in a macrochannel. In the present study microchannels of various hydraulic diameters are fabricated on a silicon wafer to study the pressure drop characteristics. The effect of abrupt contraction and expansion is also studied. It is found from the results that the friction factor in a straight microchannel is about 15% higher than that in a conventional macrochannel, and the loss coefficients in abrupt expansion and contraction are about 10% higher than that obtained through conventional flow analysis.

• 한국조경학회지
• /
• 제26권3호
• /
• pp.118-133
• /
• 1998

The residents, living in multi-family housing, prefer to have healthy and natural outdoor environmental for better human and environment quality. Thus, providing the high qulity of amenity has become a popular word in site planning and housing developments field. However, the scope and definition of amenity have not yet clearly identified and it becomes and issue in planning and development field. The purpose of this study isto examine and to evaluate the amenity and its implicationi for site planning so that analysis methods such as to interview and survey with residents were carried out. The results of this study are summarized below; The amenity of residential environment means total environmental quality to the residents in a broad sense. Abundent green environment would be very important factor to increase the amenity of residential environment so that the expansion of green field would improve the quality of multifamily housing. The expansion of green environment and biotope was the most important factor to increase the symbiosis system between residents and outdoor environment. And the amenity should be conformed to the certain standand of environmental quality and the high quality of amenity would be increased significantly in the future for residental developments. Thus, it should be accomplished by preparing practical methods in means of discriminative strategy products planning principle.

• 터널과지하공간
• /
• 제18권1호
• /
• pp.33-43
• /
• 2008

지반침하 대상지역 암반의 부피팽창률에 대한 측정방법은 국 내외적으로 아직까지 규정된 바는 없으며, 그동안 현장에서 화약발파에 의한 암반의 부피증가율로써 부피팽창률을 적용하여 시용하여 왔다. 하지만 이렇게 제시된 부피팽창률은 일정한 기준으로 분류되지 않았을 뿐만 아니라, 각각에서 제시된 값들은 암종에 따라 부피팽창률 범위 차이가 있기 때문에 지반침하 대상지역에 그대로 적용하기에는 다소 무리가 있다. 따라서 본 연구에서는 편마암, 석회암 및 셰일을 대상으로 붕락대에 영향을 미칠 수 있는 파쇄암의 적재 형태에 따른 부피팽창률과 응력에 따른 부피팽창률을 산정하기 위해 파쇄암이 적재된 상태에서 일정한 하중을 가하여 실내실험을 실시하였다.