• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1365-1372
• /
• 2012

본 논문에서는 임펄스 발생기로부터 계측 시스템으로 전달되는 펄스 신호의 주파수 성분을 매우 정밀하게 측정하고 관련 불확도를 평가하는 시스템과 방법을 다루었다. 임펄스 신호의 스펙트럼 진폭 불확도를 결정짓는 복잡한 요소들과 그 해석적 분석 방법 및 실측을 통한 평가 결과를 제시하였다. 측정 시스템의 확장 불확도는 0.015이고, 이는 국내 최고 수준이며 세계적 교정기관의 결과와도 대등한 수준이다.

• 한국진공학회지
• /
• 제14권4호
• /
• pp.186-194
• /
• 2005

정적법 고진공 표준기를 이용하여 스피닝 로터 게이지를 $4.04\times10^{-3}$ $Pa\~1.11\times10^{-2}$Pa에서 교정하였으며, 그 결과를 국제표준화기구에서 권고한 측정불확도 표현지침에 따라 불확도를 계산 및 평가하였다. 평가 결과 기준압력 $7.5488\times10^{-3}$ Pa에서 교정된 SRG의 합성표준불확도는 $95\%$ 신뢰수준, 포함인자 k = 1에서 $3.0035\times10^{-5}$ Pa로 나타났다.

• 한국음향학회지
• /
• 제23권2호
• /
• pp.90-102
• /
• 2004

교정 및/또는 시험기관은 국제상호인증협정 (Global Mutual Recognition Arrangement)에 따라 ISO 17025[1]의 경영요건 및 기술요건의 제반 조건 또는 이와 동등한 조건을 충족시켜야 한다. ISO 17025의 기술요건을 기술한 제 5장, 제 5.10.4 절은 교정성적서 (Calibration Certificate)에 대한 요구사항을 제시하고 있는데, 이들 중 하나가 측정 불확도 (Uncertainty of Measurement)를 교정성적서에 명시하여야 하는 것이다. 본 논문에서는 표준 마이크로폰의 가역교정에 따른 제반 불확도 요인을 측정 또는 계산하여 표준 마이크로폰의 교정에 대한 측정 불확도를 계산하였다. 중간 주파수 영역에서 1인치 및 1/2 인치 마이크로폰의 경우 확장불확도는 0.03 dB 였으며 20 Hz에서는 각각 0.10 dB과 0.11 dB, 고주파에서는 각각 0.07 dB와 0.08 dB까지 증가한다.

• 한국자기학회지
• /
• 제14권6호
• /
• pp.201-206
• /
• 2004

자기장 측정기 교정 및 자기관련 시험 등에 사용되는 직류 및 교류 자기장 표준시스템을 제작하였다. 자기장 1 mT범위에서, 직류의 경우 확장불확도(expanded uncertainty, 2$\sigma$)는 8${\times}$$10^{-6}$, 교류의 경우, 주파수에 따른 확장불확도는 0.1～1 kHz 범위에서 0.16%, 1～5kHz에서 0.26%, 5～20kHz에서 0.44%이었다. 또한 국가측정표준에 대한 동등성과 수행한 교정 및 측정에 대한 국가간 상호인정을 받기 위하여 이 분야의 핵심측정표준 국제비교(international key comparison)에 참여하였다. 선진국과 대등한 결과를 얻었으며, 자기장 분야의 측정능력이 세계적 수준임을 확인하는 계기가 되었다.

• 대한화학회지
• /
• 제47권1호
• /
• pp.31-37
• /
• 2003

측정 및 화학분석에 많이 이용되는 한 점 교정식에 대하여 측정 불확도 표기 지침서(GUM)의 근사법과 Monte-Carlo Simulation에 의해 계산된 각각의 확장불확도를 비교하였다. 이 비교를 위하여 임의의 자료들을 여러 농도 수준에서 정규 분포 또는 t-분포로 가정하여 계산하였다. 나눗셈에 의한 한 점 교정식의 비선형성과 t-분포 형식을 함에 따른 입력량의 과도한 퍼짐으로 인하여, 경우에 따라서, GUM의 근사법으로 계산된 불확도가 Monte-Carlo Simulation에 의해 계산된 것보다 약 50% 이상의 오류가 있다는 것이 확인되었다. 그러나, 검출 하한을 계산하기 위하여 한 점 교정식을 이용하는 경우, 반응량의 표준불확도가 상대적으로 매우 크고 비선형성에 희한 계산 오류가 상대적으로 무시되므로 근사식에 따른 계산 오류가 발생하지 않았다.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.325-334
• /
• 2016

We projected the distribution of Hedera rhombea, an evergreen broad-leaved climbing plant, under current climate conditions and predicted its future distributions under global warming. Inaddition, weexplained model uncertainty by employing 9 single Species Distribution model (SDM)s to model the distribution of Hedera rhombea. 9 single SDMs were constructed with 736 presence/absence data and 3 temperature and 3 precipitation data. Uncertainty of each SDM was assessed with TSS (Ture Skill Statistics) and AUC (the Area under the curve) value of ROC (receiver operating characteristic) analyses. To reduce model uncertainty, we combined 9 single SDMs weighted by TSS and resulted in an ensemble forecast, a TSS weighted ensemble. We predicted future distributions of Hedera rhombea under future climate conditions for the period of 2050 (2040~2060), which were estimated with HadGEM2-AO. RF (Random Forest), GBM (Generalized Boosted Model) and TSS weighted ensemble model showed higher prediction accuracies (AUC > 0.95, TSS > 0.80) than other SDMs. Based on the projections of TSS weighted ensemble, potential habitats under current climate conditions showed a discrepancy with actual habitats, especially in the northern distribution limit. The observed northern boundary of Hedera rhombea is Ulsan in the eastern Korean Peninsula, but the projected limit was eastern coast of Gangwon province. Geomorphological conditions and the dispersal limitations mediated by birds, the lack of bird habitats at eastern coast of Gangwon Province, account for such discrepancy. In general, potential habitats of Hedera rhombea expanded under future climate conditions, but the extent of expansions depend on RCP scenarios. Potential Habitat of Hedera rhombea expanded into Jeolla-inland area under RCP 4.5, and into Chungnam and Wonsan under RCP 8.5. Our results would be fundamental information for understanding the potential effects of climate change on the distribution of Hedera rhombea.

• 한국대기환경학회지
• /
• 제34권2호
• /
• pp.331-341
• /
• 2018

Hazardous air pollutants(HAPs) in the atmosphere are regulated as major air pollutants in Korea by the Air Pollution Control Act. In order to manage and control HAPs, accurate standards, which are traceable to the International System of Units(SI), are required. In this study, primary standard gas mixtures(PSMs) of volatile organic compounds(VOCs) which are specified as HAPs were developed at $1{\mu}mol/mol$ levels. The selected fourteen VOCs include Benzene, Toluene, Ethylbenzene, m-Xylene, Styrene, o-Xylene, Chloroform, 1,1,2-Trichloroethane, Trichloroethylene, Tetrachloroethylene, 1,1-Dichloroethane, Carbon tetrachloride, 1,3-Butadiene, and Dichloromethane. The HAPs PSMs were gravimetrically prepared in aluminum cylinders and their consistency was verified within the relative expanded uncertainty of 0.71% (k=2). Potential adsorption loss onto the internal surface of cylinders was estimated by cylinder-to-cylinder division method. No adsorption loss was observed within the uncerainty of 0.53%. The long-term stability of the HAPs PSMs was evaluated comparing with freshly prepared HAPs PSMs. The HAPs PSMs were stable for one year within the uncertainty of 0.38%. The final uncertainty of the PSMs was determined by combining the preparation uncertainty, verification uncertainty, and stability uncertainty. Finally, traceable and stable HAPs PSMs at $1{\mu}mol/mol$ levels were developed with the uncertainty of less than 0.76% in high-pressure aluminum cylinders.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.137-146
• /
• 2016

In recent years, business environment is faced with multi uncertainty that have not been suffered in the past. As supply chain is getting expanded and longer, the flow of information, material and production is also being complicated. It is well known that development service industry using application software has various uncertainty in random events such as supply and demand fluctuation of developer's capcity, project effective date after winning a contract, manpower cost (or revenue), subcontract cost (or purchase), and overrun due to developer's skill-level. This study intends to social contribution through attempts to optimize enterprise's goal by supply chain management platform to balance demand and supply and stochastic programming which is basically applied in order to solve uncertainty considering economical and operational risk at solution supplier. In Particular, this study emphasizes to determine allocation of internal and external manpower of developers using S&OP (Sales & Operations Planning) as monthly resource input has constraint on resource's capability that shared in industry or task. This study is to verify how Stochastic Programming such as Markowitz's MV (Mean Variance) model or 2-Stage Recourse Model is flexible and efficient than Deterministic Programming in software enterprise field by experiment with process and data from service industry which is manufacturing software and performing projects. In addition, this study is also to analysis how profit and labor input plan according to scope of uncertainty is changed based on Pareto Optimal, then lastly it is to enumerate limitation of the study extracted drawback which can be happened in real business environment and to contribute direction in future research considering another applicable methodology.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.1-5
• /
• 2012

밀폐된 소형부품의 내부압력을 측정하는 장치를 개발하였다. 개발된 장치에서 실험한 시료의 내부압력은 43.151 kPa이었고 국제표준화기구에서 권장한 방법에 따라 계산된 확장불확도는 741 Pa이었다. 본 연구결과로 지금까지는 전혀 측정이 불가능 했던 밀폐된 시료의 내부압력을 측정할 수 있게 되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1862-1864
• /
• 2002

In this study, micro-ohm shunts with rated ac current of 2, 20, 80kA intended for use as an approved system for ac current measurement were calibrated according to IEC 60060. The scale factor and linearity were determined by comparison with the reference measuring system. Measurements of temperature rise due to the rated current was also investigated to analyze a temperature effect. One of the main goals was the determination of the measurement uncertainty of the shunt. The expanded uncertainty of the scale factor for the complete measuring system was satisfied with the STL(Short-circuit Testing Liaison) guide recognized tentatively.