• Archives of Metallurgy and Materials
• /
• v.64 no.3
• /
• pp.931-934
• /
• 2019

Al-CuO is a thermite material exhibiting the exothermic reaction only when aluminum melts. For wide spread of its application, the reaction temperature needs to be reduced in addition to the enhancement of total reaction energy. In the present study, a thermite nanocomposite with a large contact area between Al and CuO was fabricated in order to lower the exothermic reaction temperature and to improve the reactivity. A cryomilling process was performed to achieve the nanostructure, and the effect of composition on the microstructure and its reactivity was studied in detail. The microstructure was characterized using SEM and XRD, and the thermal property was analyzed using DSC. The results show that as the molar ratio between Al and CuO varies, the fraction of uniform nanocomposite structure was changed affecting the exothermic reaction characteristics.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.46-51
• /
• 2008

In this study, evaluation system of the thermal properties of the exothermic agents was investigated. Exothermic agents property evaluation system was developed by metering variation of power supply. Thermal properties of exothermic agents was affected by material mixture condition of exothermic agents, however, it was not affected by temperature. It is possible to make various exothermic agents by means of regulating thermal properties which is based on property evaluation system of exothermic agents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.356-363
• /
• 2008

An evaluation system of the thermal properties of exothermic & insulating materials was developed. By measuring the power supply of the induction furnace, the thermal property of exothermic & insulating materials could be evaluated with high reproducibility at elevated temperature of molten steel. The thermal properties of exothermic & insulating materials were affected by mixing condition of raw materials. The effect of main components of exothermic & insulating materials such as metallic aluminum and $Fe_2O_3$ powder on the exothermic and insulating properties was examined. It could be expected to design and develop various exothermic & insulating materials by means of the evaluation system of the thermal properties.

• Proceedings of the KIEE Conference
• /
• 2006.10b
• /
• pp.167-170
• /
• 2006

$TiO_{2}-Nb_{2}O_{5}$ sol was prepared using sol-gel method. DTA properties of gel powder had endothermic reaction due to evaporation of propanol and water about $78^{\circ}C$, had exothermic reaction due to propanol combustion about $290^{\circ}C$ and had exothermic reaction due to changing of $TiO_2$ phase about $640^{\circ}C$. Capacitance of thin films increased according to increasing relative humidity, whereas it decreased according to increasing measured frequency.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.75-79
• /
• 2001

For handling and storage of reactive chemicals, the hazard evaluations have been extremely important. In the chemical industry, the most concerns are focused on the thermal harzards such as runaway reactions and thermal decompositions, which are mostly governed by thermodynamics and reaction kinetics or these reactive chemical in the system. This study no investigated the thermal decomposition characteristics of nitrophenylhydrazine isomers by using differential scanning calorimeter(DSC) and accelerating rate calorimeter(ARC). Experimental results showed that exothermic onset-temperatures in nitrophenylhydrazine(NPH) isomers were about 160-$210^{\circ}C$ by DSC and 100-$150^{\circ}C$ by ARC. The decomposition temperature acquired by ARC was about 50-$60^{\circ}C$ lower than that by DSC. Reaction heats were about 40-100cal/g by DSC and 330-750ca1/g by ARC. While ortho isomer of NPH show two distinct exothermic peaks, para isomer shows a single peak in DSC curves. The first exothermic peak for 2-NPH is mainly due to intramolecular dehydration forming 1-hydroxybenzotriazole(HOBT) and the second exothermic peak is mainly due to the decomposition of HOBT formed in the first step of decomposition. The exothermin peak in the DSC curve for 4-NPH is mainly due to dissociation of hydrazino and nitro groups.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.5
• /
• pp.234-237
• /
• 2010

Nanoenergetic materials were synthesized and the thermite reaction between the CuO nanowires and the deposited nano-Al by Joule heating was studied. CuO nanowires were grown by thermal annealing on a glass substrate. To produce nanoenergetic materials, nano-Al was deposited on the top surface of CuO nanowires. The temperature of the first exothermic reaction peak occurred at approximately $600^{\circ}C$. The released heat energy calculated from the first exothermic reaction peak in differential scanning calorimetry, was approximately 1,178 J/g. The combustion of the nanoenergetic materials resulted in a bright flash of light with an adiabatic frame temperature potentially greater than $2,000^{\circ}C$. This thermite reaction might be utilized to achieve a highly reliable selective area crystallization of amorphous silicon films.

• Journal of Korean Institute of Fire Investigation
• /
• v.11 no.1
• /
• pp.139-144
• /
• 2007

The fires were occasionally occurred by the quicklime, used in soil conditioners and stall disinfectant, in the stables and shed especially during the rainy season. Accordingly, we observed that spontaneous ignition by the exothermic reaction was happened through the revival experiments. As a results of revival experiments, we confirmed that fire had been occurred by exothermic energies in the case of heat accumulation.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.1
• /
• pp.11-22
• /
• 1999

Thermal behavior of dickite was studied by thermal analysis, X-ray diffraction analysis, electron microprobe analysis, and scanning electron microscopy, Dickite has an endothermic peak at about$ 650^{\circ}C$ and an exothermic one at $960^{\circ}C$ in the differential thermal analysis. The endothermic reaction is assigned to the decomposition of dickite to meta-dickite. Hydroxyl radicals are removed from dickite structure by the reaction, resulting in the weight loss about 10.5~14.5% and appearance of a 14$\AA$ phase different from other kaolin minerals. The reaction slowly proceed in the range of $200^{\circ}C$. As the completion of decomposition, aciclular mullite forms at the expense of meta-dickite plates with random crystallographic relationship. Mullites have diverse silica versus alumina ratio. The exothermic reaction without weight loss seems to be due to the formation of spinel and amorphous silica. The spinel phase shows cryptocrystalline globular morphology accompanying a little amount of silica. From spinel phase shows cryptocrystalling globular morphology accompanying a little amount of silica. From this work, it is suggested that mullite is formed from meta-dickite much lower temperature than the reported one in the previous works.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.25-34
• /
• 2016

From 1990's, a study on the development of exothermic concrete, a concrete which electro-conductive material is mixed, has been proceeded. However, due to the difficulty of exothermic reproducibility of concrete specimen, the study has been unable to continuously carried out. Accordingly, this study was focused on developing an exothermic concrete for the purpose of snow-melting material. Cement paste and mortar specimens mixed with graphite, conductive metal powder and chemical admixture were made. The evaluation of exothermic performance and reproducibility was conducted under $-2^{\circ}C$ of low temperature. In addition, micro-chemical analysis was carried out to investigate a cause of exothermic reproducibility. As a test result, the specimen mixed with graphite and superplasticizer with air entrained showed the best exothermic performance and reproducibility. Through micro-chemical analysis, it is judged that polymer or methacrylic acid (MAA), the contents inside the superplasticizer with air entrained, gave exothermic reproducibility by generating the electrochemical reaction with graphite.