• 한국잠사곤충학회지
• /
• 제24권2호
• /
• pp.81-84
• /
• 1983

견사에 대한 산성염료인 Orange II의 평형수착을 pH 2.2 HCl염욕중에서 온도 50$^{\circ}$, 70$^{\circ}$ 및 9$0^{\circ}C$로 변화시켜, 또한 온도 $50^{\circ}C$에서 pH를 1.5, 2.2 및 4.0으로 조절하여 수착식을 검토하였다. pH 1.5 및 2.2에서의 수착식은 이원 model 즉 Langmuir형과 Nernst형의 합으로 표시됨을 알았다. Langmuir 수착평행상수 $K_{L}$ 은 온도의 상승과 pH의 증가에 따라 감소하였고, Nernst분배계수 $K_{P}$ 도 비슷한 경향을 보였다. 수착 반응은 발열반응임을 알 수 있었고 표준 entropy는 정의 값임을 알았다.

• 열처리공학회지
• /
• 제6권3호
• /
• pp.138-143
• /
• 1993

Effects of aging treatment on the microstructural evolution of a rapidly solidified Al-Li-Cu alloy were investigated by differential scanning calorimetry (DSC) and transmission electron microscopy(TEM). It was found that the precipitation sequence was: supersaturated solid solution ${\alpha}^{\prime}$ ${\rightarrow}$ metastable ${\delta}^{\prime}$ + stable precipitate $T_1$ ${\rightarrow}$ stable precipitates ${\delta}+T_1$. Two exothermic and two endothermic peaks are detected by DSC analysis. The two exothermic and endothermic peaks corresponded to ${\delta}^{\prime}$ and ${\delta}+T_1$ precipitation and dissolution reactions respectively. The enthalpy of ${\delta}^{\prime}$ precipitation decreased with increasing of aging temperature and time until the finishing point of precipitation. The activation energy for precipitation of ${\delta}^{\prime}$ was measured as 80KJ/mol and the energy for dissolution was 93KJ/mol. These values arc higher than those of AI-Li binary alloy. Peak hardness value (Hv 170) was obtamed at $210^{\circ}C$ for 1hr aging treatment which coincided with finishing point of ${\delta}^{\prime}$ precipitation.

• Membrane and Water Treatment
• /
• 제9권2호
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.101-104
• /
• 2000

Li-graphite intercalation compounds (GICs), synthesized at elevated temperature and pressure, were allowed to decompose spontaneously in the atmosphere. The decomposition processes were analyzed by of X-ray diffraction, DSC analysis, FT-IR measurements, UV/VIS spectrophotometry. The deintercalation reaction of the Li-GICs ceased after 6 weeks and only the residual compounds could be observed. A strong exothermic reaction was observed at 300 $^{\circ}C$ in thermal decomposition, and relatively stable decomposition curves were formed. A few endothermic curves have been observed at 1000 $^{\circ}C.$ After 6 weeks deintercalation reaction time of GICs, many exothermic and endothermic reactions were accompanied at the same time. In addition the reactions of the functional groups such as aromatic rings, nitrogen, $-CH_3$, $-CH_2$ etc. of GDIC obtained by the above reaction were confirmed by FT-IR spectrum. UV/VIS spectrophotometric measurement clearly shows the formation of a minimum energy value ($R_{min}$) for the compounds between Li-GICs as a starting material and Li-GDICs obtained until after 3 weeks of the deintercalation reaction, while they were no clear energy curves from 4 weeks of reaction time, because of the formation of the graphite structure, of high stages and of the Li compounds surrounding the graphite in the deintercalation reaction.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.153-160
• /
• 2018

An environmentally favorable (chlorine-free) solid oxidizer, guanidinium dinitramide [GDN; $NH_2C(NH_2)NH_2N(NO_2)_2$], was newly synthesized from guanidine carbonate [$NH_2C(=NH)NH_2{\cdot}1/2H_2CO_3$]. Two different crystalline forms (${\alpha}-type$ and ${\beta}-type$) appeared according to the applied solvents and synthesis conditions. Moisture, during extraction, might become trapped in a crystal between inner molecules. Therefore, despite having the same chemical composition, Raman-IR and TGA-DSC revealed different physical characteristics of the two forms. Peaks of Raman shift near $1000cm^{-1}$ implied different chemical structures. Thermal analysis revealed an exothermic temperature $155.7^{\circ}C$ for ${\alpha}-type$ but one of $191.6^{\circ}C$ for ${\beta}-type$. The caloric value of ${\alpha}-type$ was 536.4 J/g, which was 2.5 times larger than that of the ${\beta}-type$, which was 1310 J/g. While the synthesized GDN of ${\alpha}-type$ showed a steep exothermic decomposition, the ${\beta}-type$ was slowly decomposed after melting through an endothermic process. This work implied that despite of the same molecular formula some different core thermal properties would appear depending on synthesis conditions.

• 한국토양비료학회지
• /
• 제17권3호
• /
• pp.283-288
• /
• 1984

동계(冬季)에 볏짚, 왕겨와 인축분뇨(人畜糞尿)를 원료(原料)로하여 재료별(材料別)로 퇴적(堆積)하고 부숙과정(腐熟過程)에서 발생(發生)되는 퇴비온도(堆肥溫度) 및 퇴비성상(堆肥性狀)의 변화(變化)를 조사(調査)한 결과(結果)는 다음과 같다. 1. 볏짚, 왕겨 1:1 혼합구(混合區)가 볏짚 단용구(單用區)에 비(比)하여 퇴비부숙발열기간(堆肥腐熟發熱期間)이 연장(延長)되었다. 2. 인산첨가구(燐酸添加區)의 퇴비온도(堆肥溫度)는 대조구(對照區)에 비(比)하여 발효초기(醱酵初期)에는 급격(急激)히 상승(上昇)하였으나 발효(醱酵) 30일(日) 이후(以後)에는 낮아지는 경향(傾向)이었다. 3. pH는 발효초기(醱酵初期)에 5.5이었으나 퇴비온도(堆肥溫度)의 급상승(急上昇)과 더불어 10일경(日傾)에 8.8까지 올라갔으며 30일 이후(日以後)부터는 거의 변화(變化)가 없었다. 4. 퇴비온도(堆肥溫度)가 $30{\sim}65^{\circ}C$로 유지(維持)되는 기간(其間)은 볏짚+계분구(鷄糞區)가 39일(日), 볏짚+왕겨+계분구(鷄糞區)가 69일(日), 볏짚+왕겨+돈분구(豚糞區)가 56일(日), 볏짚+왕겨+우분구(牛糞區)가 66일(日), 볏짚+왕겨+인분구(人糞區)가 21일(日)로서 볏짚+왕겨+계분구(鷄糞區)가 가장 길었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권1호
• /
• pp.53-62
• /
• 1987

The Performance of Pre-combustion Chamber Diesel Engine mainly depends upon the compression, combustion and Expansion Processes. The analysis of varying tendency of the work factors for crank angles during these processes, which are consisted of 5 items such as exothermic energy, flow work, work in nozzle part, kinetic energy and cooling energy, are considered important as basic elements for effective combustion and performance improvement. In this paper, varying tendencies of the theoretical factors are investigated with pressure data through experiments. By the results, the trends of work factors are presented as basic data for comparing the influencing effects on work.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.1-9
• /
• 1995

The mechanism of various spherical particles formation from wide range of tribo-systerns is suggested and deduced by the action of micro-explosion on the basis of the thermally-activated wear theory, in which the flash temperature at contact could be reached clearly upto the material molten temperature due to the secondary activation energy from the exothermic reactions involving lubricant thermo-decomposition, metals oxidation, hydrogen reactions and other possible complex thermo-reactions at the contacts. Various shapes of spherical particles generated from the tribosystem can be explained by the toroidal action of micro-explosion accompanied with the complex thermo-chemical reactions at the contact surfaces or sub-surfaces.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.209-214
• /
• 1995

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.210-216
• /
• 2015

Polyurethane modified silicone (PUMS) was synthesized from various molecular weights of polydimethylsiloxane (PDMS 2000, PDMS 6000, PDMS 20000), polypropyleneglycol with molecular weight of 3000 g/mol (PPG 3000) and 2,4-toluenediisocyanate (TDI) under tin catalyst. Their structures were confirmed by the measurement of FT-IR and $^1H-NMR$, and the thermal properties were studied from DSC and TGA. Glass transition temperature of PUMS exhibited exothermic peak at $-63{\sim}-69^{\circ}C$, and residual weight was 19~35% at $800^{\circ}C$.