• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.602-607
• /
• 2002

금형가공에서 사용되는 밀링머신의 가공시 공구와 피삭재의 접합면에서는 절삭가공의 잔유물인버(Burr)가 생성되고, 이러한 버는 작업효?ㅘ 정밀도를 감소시키며 후처리과정(Deburring)을 야기시키는 원인이 된다. 그러므로 정밀도와 작업효율을 극대화하기 위해서는 이러한 버의 생성원리를 파악함과 동시에 Exit 버 판별을 하여 최적의 가공조건을 맞추어 주어야 하는데, 이에 밀링가공을 통해 생성되는 버의 형태와 Exit 각 등을 파악, 알고리즘으로 개발하여 좀 더 효율적인 가공조건을 제시하고자 한다. 본 연구는 이제까지 개발된 실제 가공에서 사용되는 임의형상의 데이터를 통해 점, 선, 원 및 원호(Arc)에 이르는 형상을 인식하는 Exit 버 판별시스템을 소개하고자 한다. 아울러 실제 가공과 더욱 유사한 환경을 만들기 위해 단일 경로에서부터 다중경로에 이르는 복합적인 환경 구현은 물론 점과 선으로 이루어진 도형과 원(구멍)형태의 피삭재 환경을 통합, 두 가지 다른 형태의 환경이 복합적으로 존재할 경우의 Data를 인식하고 아울러 다양한 방향성을 가진 선으로 이루어진 형상에 이르기까지의 다양한 피석재 Data를 구현하고, 입력된 절삭조건을 해석하여 임의형상을 가진 다양한피삭재에서의 단일 및 다중 가공 경로 상에서 발생될 버를 해석하고 최소화 및 최적 절삭가공공정을 찾아 작업 효율성을 극대화하는 목적의 해석 알고리즘을 Windows 프로그램으로 구현하고자 한다.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.147-155
• /
• 2005

As multiplex theaters are increasing rapidly in number, concerns over the evacuation process in case of fire emergency are also increasing. The study investigates the users' awareness and recognition of evacuation route by the method of questionnaire, and analyzes the users' behavior in choosing the route by the simulation program called Simulex. Among others, findings indicate a vast majority of the users are unaware of the proper route in the emergency, yet anticipate to evacuate by it, instead of the entry/exit route that they are familiar with. This aspect, however, can be useful to provide the proper route of evacuation for the users, if an appropriate information is given that the entry/exit route is also used as an emergency egress. The simulation shows heavy congestion at the closer evacuation route from the exit, and distinctly less traffic at the farther means of egress. Based on this natural phenomenon, it is suggested that the emergency stair should be nearby and aligned with the exit from auditorium. Although the present building regulation only requires a minimum dimension at each route, there is a need to widen the passageway that is likely to be recognized easily and subsequently overcrowded in case of fire emergency.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.19-25
• /
• 2013

Extrusion is one of the most important operations in the polymer-processing industry. Balancing the distribution of flow through a die to achieve a uniform velocity distribution is the primary objective and one of the most difficult tasks of extrusion die design. If the manifold in a coat-hanger die is not properly designed, the exit velocity distribution may be not uniform; this can affect the thickness across the width of the die. Yet, no procedure is known to optimize the coat hanger die with respect to an even velocity profile at the exit. While optimizing the exit velocity distribution, the constraint optimization used in this work with allowable pressure drop in the die; according to this constraint we can control the pressure in the die. The computational approach incorporates three-dimensional finite element simulations software STAR-CCM+. These simulations are used with numerical optimization to design polymer coat hanger dies with pressure drop, uniform velocity and temperature variation across the die exit.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.118-122
• /
• 2013

For safe evacuation in the fire disaster, the evacuees must find the exit and evacuate quickly. Especially, if the evacuees don't know the location of the exit, they have to depend on the evacuation guidance system. Because the more smoke spread, the less visibility is decreasing, it is difficult to find the way to the exit by the naked eye. For theses reasons, the evacuation guidance system is highly important. However, the evacuation guidance system without change of direction has the risk that introduce to the dangerous area. In the evacuation safety assessment scenario by the evacuation simulation has the same problem. Because the evacuee in the simulation evacuate by the shortest route to the exit, the simulation result is same like the evacuation without the evacuation guidance system. In this study, it was used with MAS (Multi Agent System)-based simulation program including the evacuation guidance system to implement the change of evacuation by fire. Using this method, confidence of evacuation safety assessment can be increase.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.291-293
• /
• 2015

The experimental study on flow characteristic in various laminar coflow diffusion flame has been conducted with a particular focus on the buoyancy force exerted from gaseous hydrocarbon fuels. Methane ($CH_4$), Ethylene ($C_2H_4$) and n-Butane ($C_4H_{10}$) were used as fuels. Coflow burner and Schlieren technique were used to observe the fuel flow field near nozzle exit and flow characteristics in flames. The result showed that the vortices in n-Butane with density heavier than air were appeared near the nozzle exit with the strong negative buoyancy on the fuel stream. As Reynolds number increases by the control of velocity, the vortices were greater and the vortices tips were moved up from the nozzle exit. In addition, it can be found that the heated nozzle can affect to the flow fields of fuel stream near the nozzle exit.

• Solar Energy
• /
• v.20 no.1
• /
• pp.97-108
• /
• 2000

The purpose of this study is to minimize the heat transfer surface area and cold fluid exit temperature of heat exchanger which applied to the refrigeration and air-conditioning system by utilizing the thermoelectric principle. Both uniform and non-uniform current distribution methods which applied to the analysis of the TE elements that incorporates heat exchanger were investigated. The non-uniform current distribution method had the better coefficient of performance and had the lower cold fluid exit temperature of the TE cooling system than the uniform current distribution method. It was found that if a TE cooling system incorporates a heat exchanger, a non-uniform current distribution should guarantee to the lowest cold fluid exit temperature. Also, the hybrid method (combination of the uniform and non-uniform current distribution method) is investigated to achieve the best results by combining the uniform and non-uniform current distributions. The results show that it can lower the cold fluid exit temperature and reduce the heat transfer surface area for the parallel flow arrangement if we apply the constant current in some entry region and the non-uniform increasing current in the direction of the cold fluid flow afterwards.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.343-349
• /
• 2007

The flow velocity distribution at inlet and exit of a DPF was measured using a Pitot tube and 2-D positioning equipment. An adaptor which was designed for accessing the Pitot tube probe into inlet of the DPF was fabricated with inlet flange of the DPF. The Pitot tube which was mounted in the 2-D positioning machine could access to the inlet of the DPF through the rectangular window of the adaptor. Automation of the velocity measurement at the inlet and exit of the DPF was effectively achieved and measuring time was reduced drastically. The flow velocity distribution at the inlet of the DPF showed parabola shape with maximum velocity near to the center of the DPF, as expected. The velocity distribution at the exit of the DPF showed crown shape, that is, the flow velocity distribution near to the center of the DPF is lower than that at surrounded peripheral region of the DPF.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.9 no.1
• /
• pp.53-61
• /
• 2021

Purpose - This study aims to understand the phenomenon called "regional multinational" in the geographical expansion of multinational enterprises and to find some evidence whether globalization of multinational enterprises tends to have a strong home region bias. Research design, data, and methodology - Through an in-depth case analysis, we analyze the series of strategic behaviors Wal-Mart made in South Korea from its entry in 1998 to its withdrawal in 2006. Then, we discuss the plausible causes of this exit, seeking to provide some evidence on the "regional multinational" phenomenon. Result - This study finds some evidence on the regional-based expansion of multinational enterprises. Our case study shows that Wal-Mart in South Korea focused on global standardization strategy and made an exit from the market as they were faced with increasing localization demands. From the perspective of multinational enterprises' globalization strategy, Wal-Mart's exit from the South Korean market can be considered as a strategic exit. Conclusion - The findings of this study suggest that while national responsiveness and localized adaptation are considered as a panacea for penetrating international markets, in reality most multinational enterprises attempt to add value primarily by capitalizing on similarities across markets and remain as regional multinationals.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.195-200
• /
• 2024

With the increase in urbanization and automobile demand, urban parking problems have emerged as a serious social issue. In response, research has been conducted to identify parking situations and provide efficient parking information to drivers by utilizing parking lot entry and exit data. This paper preprocesses entry and exit data based on public data to extract parking times and provides expected exit times using the mode value, allowing drivers to anticipate when a vehicle will leave the parking space at their desired parking time. Future research aims to improve the current system by using a real-time parking management system and enhance the accuracy and efficiency of parking space identification.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3669-3676
• /
• 2013

Faithful transmission of genetic information depends on accurate chromosome segregation as cells exit from mitosis, and errors in chromosomal segregation are catastrophic and may lead to aneuploidy which is the hallmark of cancer. In eukaryotes, an elaborate molecular control system ensures proper orchestration of events at mitotic exit. Phosphorylation of specific tyrosyl residues is a major control mechanism for cellular proliferation and the activities of protein tyrosine kinases and phosphatases must be integrated. Although mitotic kinases are well characterized, phosphatases involved in mitosis remain largely elusive. Here we identify a novel variant of mouse protein tyrosine phosphatase containing domain 1 (Ptpcd1), that we named Ptpcd2. Ptpcd1 is a Cdc14 related centrosomal phosphatase. Our newly identified Ptpcd2 shared a significant homology to yeast Cdc14p (34.1%) and other Cdc14 family of phosphatases. By subcellular fractionation Ptpcd2 was found to be enriched in the cytoplasm and nuclear pellets with catalytic phosphatase activity. By means of immunofluorescence, Ptpcd2 was spatiotemporally regulated in a cell cycle dependent manner with cytoplasmic abundance during mitosis, followed by nuclear localization during interphase. Overexpression of Ptpcd2 induced mitotic exit with decreased levels of some mitotic markers. Moreover, Ptpcd2 failed to colocalize with the centrosomal marker ${\gamma}$-tubulin, suggesting it as a non-centrosomal protein. Taken together, Ptpcd2 phosphatase appears a non-centrosomal variant of Ptpcd1 with probable mitotic functions. The identification of this new phosphatase suggests the existence of an interacting phosphatase network that controls mammalian mitosis and provides new drug targets for anticancer modalities.