• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.31-32
• /
• 2023

Recently, with the digitalization of the construction industry, free-form building construction technology is developing. However, the technology for manufacturing free-form concrete panels is still insufficient. In this study, the surface error of the FCP according to the thickness of the lower silicon plate, which is a component of the existing lower multi-point press, was analyzed in order to manufacture a precise FCP. As a result of the analysis, it was found that the thinner the thickness, the larger the error value. These results can be used as a basis for existing research and are expected to be used for research on high-quality FCP manufacturing technology.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.392-399
• /
• 2003

This paper discusses the validities of insulating curing of cold weather concreting at early stage by applying insulation forms. Tests were carried out using modified insulating form combining existing insulating form and various other insulations in order to develop improved insulation form. Temperature history of concrete using various insulating forms and insulation was measured to determine most effective combination of insulting form. According to results, as for the wall form, under the curing temperature of $-10^{\circ}C$, the temperature of concrete using Euro form drops sharply before 24 hours and lasts below $0^{\circ}C$ for 7 hours. The temperature of concrete using the form combining Polypropylene panel, styrofoam and plywood panel keep above $0^{\circ}C$. And, it is confirmed that the form mentioned above has a favorable effects on enhancing strength development of concrete and the cost to make the forms shows more reasonable than that of existing forms. However, as for the combination methods of insulation form for slab, which is composed of insulating form at the bottom of slab and various surface curing materials at the top of slab, in case of exposed condition at the top of slab, temperature history of concrete goes below $0^{\circ}C$ after 10 hours. In case of the combination of vinyl sheet and curing blanket, it drops below $0^{\circ}C$ after 42 hours. However, in case of the combination of vinyl, styrofoam and curing blanket, it does not go below $0^{\circ}C$ until 55 hours. Accordingly, compared to the case of exposure and the combination of vinyl and curing blanket, it indicates that the combination mentioned above has more effective insulating performance.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.124-131
• /
• 2008

This paper presents the analysis of resistance performance and bow waves for the resistance-minimized hull form of small fishing boat by using numerical simulations and model tests. The resistance-minimized hull form is developed from an original hull form which is selected from existing small fisher boats in our country. In order to estimate the resistance performance for the original and the developed hull form, several numerical simulations and model tests are carried out. Marker and Cell(MAC) method and Marker-Density method are adopted to simulate the free-surface bow waves around advancing hull surface. The results of numerical simulations are compared with the model tests in towing tank. The results show that the resistance performance of the resistance-minimized hull form is improved than that of the original hull form. The results of this study will be a good guide to the hull form development of small fishing boats in future.

• Journal of Korea Multimedia Society
• /
• v.10 no.5
• /
• pp.687-697
• /
• 2007

Although the Java bytecode has numerous advantages, there are also shortcomings such as slow execution speed and difficulty in analysis. Therefore, in order for the Java class file to be effectively executed under the execution environment such as the network, it is necessary to convert it into optimized code. We implemented CTOC for transforming to optimized code. In Optimization, SSA Form that distinguish variable by assignment is used to determine value and type statically. Copy propagation, dead code elimination optimization is applied to SSA Form. However, existing SSA Form is related to variable than expression. Therefore, in this paper, to performing optimization to SSA Form expression, after performing copy propagation and dead code elimination, in addition to that, partial redundant expression elimination is performed

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.432-438
• /
• 2017

The primary objective of the current work was to develop a standardized retrofit hull form capable of saving energy based on existing vessels. The bow shape of existing vessels was investigated, giving consideration to design draft and speed. Resistance performances were assessed for existing vessels according to operating conditions. Commercial CFD codes and model test materials were used for assessment of effective power. Three retrofit hull forms with minimum resistance were selected given real operating conditions. These vessels were named after customized ready-made hull forms to enable ship owners to make easier choices. The effective power of each vessel was estimated under real operating conditions. Subjects were operated with the lowest draft, and performance for retrofit No. 3 showed an 11-16% improvement in effective power at low speed ranges of 16-18 knots compared to existing vessels. When operated with a middle draft, performance for retrofit No. 3 showed a 6-11% improvement in effective power at low speed ranges compared to existing vessels. When operated with the highest draft, performance for all vessels showed little difference in effective power.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.127-138
• /
• 2016

As the dark side of society, Idle spaces, which occurred with the paradigm change due to rapid modernization and industralization, has been existing as a severed part in cities. But with the periodic change, interest in the existing place and regional regeneration, and the necessity of reconsidering about the idle spaces values of space, city environment, socio-culture, and economy was proposed. I estimated that the change of relational aesthetics aspect of modern arts resulted in the consideration of recognizing 'place' of art, through the study, it was revealed that the form of modern arts and change of enjoyment were related to space, and the fact that this had a relation with the rise of artistic regeneration of idle spaces. mutually communicative relationship formation and practical form of arts was deducted through the interpretation of relational aesthetics, Idle spaces and artistic regeneration space can be categorized into forms of experiential space, creative space, and cultural space, depending on the formation of relationship between author-art-audience. Through the comprehensive analysis, Artistic regeneration space by relationship formation is Vitalization of various forms of art and participation program eliminates the boundary between creation and enjoyment, and the space itself can be said to contain extensive, integral, and nonterritorialization meaning as a place of experiencing art. In other words, Artistic regeneration space of idle spaces forms a close relationship with the local society, and is placed within the context of daily domain as an open space, straying off from the existing separative and closed artistic space configuration. and artistic changeover of idle spaces is not only the appearance of space that simply fulfills function according to transfiguration of modern art, but signifies that art is coexisting with space as an indivisible relationship, and can be said to be the foothold of new relationship creation as the practical 'place' of art.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.222-226
• /
• 2007

Buildings form interior space when part of an external environment is limited by a physical surface. And, the interior space forms an appearance of building when space-defining elements, such as floor, wall, and roof. An appearance or a form of building has a lot of meanings depending on the physical and psychological conditions, as well as symbolism. Especially, the prevailing meaning of form in the modern age was, "Form follows function," was quite different from the meaning of form in the architectural era of Louis I. Kahn, who asserted "Form always supercedes function," when functional modernism was still existed even after some 50 years later. Existing studies on Louis I. Kahn usually analyzed his architectural terminology and philosophical concepts of Centrality, Light, Order, Form, and Design; or they were focused on an overall plane and the principle of composition. The purposes of this study are: (1) to investigate how the formal composition characteristics of building are expressed on skylights; and (2) to demonstrate that the formal composition characteristics of skylights plays an important role in constructing a whole structure of building in relation with other architectural elements.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.195-204
• /
• 1996

We suggest a transform method form asynchronous finite state machines (AFSMs) into signal transition graphs (STGs) for speed-independent circuit synthesis. Existing works synthesize nodes in the state graph increases exponentially as the number of input and output signals increases. To overcome the problem of the exponential data complexity, we transform AFSMs into STGs so that the previous synthesis algorihtm form STGs can be applied.Accoridng to the experimental results, it turns out that our synthesis method produces more efficient circuit than the previous synthesis methods.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.1047-1052
• /
• 2003

The purpose of this study is to improve the productivity and constructability of permanent forms. The permanent forms will cut down the cost of production and make easier to install in the field; hence increase the use of forms in the today's market. The permanent form is produced in the factory and built in field. So this study is in two parts. The one is the productivity in factory, the other is constructability in the field. This study is the designing a new mold system as a solution to existing mold system's problems.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.31 no.7
• /
• pp.1-10
• /
• 1982

This paper derives the algorithm to estimate the operating cost, its marginal cost, and the reliability indices for the long term planning of power system. Treating the load duration curve and the system in the stochastic sense takes the place of the inverted load duration curve, effective load duration curve, and the numerical integration in the conventional methods. The time and accuracy of computation are substantially improved due to the fact that all expressions are represented by simple analytic form instead of the existing recursive form.