• Fashion & Textile Research Journal
• /
• v.1 no.1
• /
• pp.43-49
• /
• 1999

This study conducted 4 different kinds of underwear materials, which were A (Cotton 100%), B (Wool 100%), C (Cotton/Wool, 50/50%) and D (Acrylic/Cotton, 50/50%) and were done in a climate chamber under cold ambient $10{\pm}1^{\circ}C$, $40{\pm}5%RH$ by 6 male subjects who were in good health. Physiological parameters such as rectal and local skin temperature(forehead, forearm, hand, trunk, thigh, leg, foot, back and chest), heart rate, body weight loss, clothing microclimate, blood lactic acid concentration, and wearing sensation were measured. Started with a 15-min rest period, 15-min of exercise 1 (the condition of 4.5 mile/hr walking speed equivalent to with 8.5 Kcal energy consumption on the treadmill) period, 15-min rest period, exercise 2 (after 3minutes warming-up at 3.0. 3.7, 4.5. 5.2. 6.0, 6.7 mile/hr) until exhaustion period, and final 15-min of recovery period were performed. The results were as follows: The lowest mean skin temperature was acrylic/cotton in order of wool > cotton/wool > cotton > acrylic/cotton (F=13. 79. p<0.00l). Most of all skin temperature by parts of body had turned out in sequence of temperature wool > cotton/wool > acrylic/cotton > cotton. Fore arm part showed highest temperature about $32.43^{\circ}C$ on wool and had a tendency approximately $1.8^{\circ}C$ higher than cotton which had the lowest temperature, and had the biggest difference among garments in terms of skin temperature. The back temperature within clothing showed about $2^{\circ}C$ higher than the chest temperature within clothing. but the back humidity within clothing showed about 4~12% higher than the chest humidity within clothing. Body weight loss by each garment was this sequence; cotton > acrylic/cotton > wool > cotton/wool.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.9
• /
• pp.468-474
• /
• 2015

When oil is used for cooking in detached or apartment houses, large amounts of oil-mist, smoke, and particulate substances are generated and dispersed into the indoor-air environment. These pollutants diffuse into the surroundings and spread their odor while rising fast at a high temperature due to the heat energy from the gas range. Although the exhaust gas is discharged from the exhaust hood, which is installed on the top of a gas range to remove the diffuse pollutants, the exhaust conditions can vary greatly because they depend on the shape of the exhaust hood and the discharge rate. In this paper, the air that is required for the gas-exhaustion process is supplied by an air curtain that surrounds the kitchen hood, and the pollutant-capturing efficiency varies depending on the angle of the discharge grills; the pollutant-capturing efficiency was studied using a numerical-analysis method. The results indicate that the pollutant-capturing efficiency is not significantly changed by a change of the discharge-grill angle at a low air-discharge rate; however, at a high air-discharge rate, the efficiency value increases with an increase of the discharge-grill angle, whereby the best value occurs at 30 degrees and the efficiency decreases above this angle. Below 30 degrees, the effect of the discharge rate on the capturing efficiency is more than that of the discharge-grill angle.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.53-58
• /
• 2017

In the age of oil exhaustion, low cost, semi-transparent solar cell, the dye-sensitized solar cell (DSC) has attracted significant attention since 1991 of $Gr{\ddot{a}}tzel$ report. To enhance the light-harvest capability of the photoelectric electrode, and efficiency of photoelectric transformation of the DSC, scattering layer of various structure have been proposed to photoelectric electrode materials. The scattering center of scattering layer needs the large titanium dioxide nanoparticles of 250 - 300 nm in diameter. In this study, the large sized $TiO_2$ nanocyrstals of around 300 nm were synthesized using the modified sol-gel process. According to the analysis of XRD and TEM, the synthesized $TiO_2$ nanoparticles exhibit single crystals of anatase phase. The optical transmittance of the synthesized titanium dioxide film prepared by spin coating is around 50% at 550 nm. It is suitable for scattering layer as a scattering center, and expected to enhance the efficiency of photoelectric transformation of the DSC.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.1-9
• /
• 1998

The exhaustion of fossil fuels and serious environmental pollution put the concern about non-po llution energy into the world. On the developments of technology, wind energy has been spotlighted as a non-pollution energy in many countries. This study has carried out the aerodynamic and structural design procedure of the lightweight composite rotor blades with an appropriate aerodynamic performance and structural strength for the 500㎾ medium class wind turbine system. The previous design, which is shell-spar structure, is redesigned to shell-spar- sandwich structure for light weight. Large deformation problem from light weight is examined by non-linear analysis. Local buckling occurred under lower stress than failure stress. The buckling analysis is accomplished to confirm the safety of the composite blade. The stress analysis around pin hole joint part at hub is carried out and it is confirmed that the pin hole is not failed. The results show that the resonance of redesigned blade does not happen in operation range.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.109-115
• /
• 2014

The research on solar energy that we get from nature to cope with energy exhaustion is a very significant and inevitable task for us to do. Along with this, lately, in Korea, as part of new growth engine industry regarding low-carbon green growth, we have selected the LED(Light Emitting Diode) as low power consuming, eco-friendly lighting equipment and have been facilitating research and development on it and creating a variety of new industries utilizing it. What was developed here in this research was the photovoltaic LED lighting system applying lithium polymer batteries equipped with the excellent performance of lithium ion batteries as well as significantly low explosive hazard. Its photovoltaic panel was made to have 100W capacity, and for its power supply system, functional convenience was considered so that it could be equipped with both DC and AC power to be used as household electricity in a variety of ways.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.1
• /
• pp.53-73
• /
• 2007

There exists historically intimate relationship between the fisheries of the three countries of Northeast Asia in terms of the same fishing ground and similar resources. This means that if one of the countries fail to manage their fisheries properly, it will harm the others. Especially, if the EEZ straddling and Trans-Boundary Fish Stocks aren't managed by the cooperation of the three countries, the exhaustion of resources will be more likely to be accelerated. Considering the aspects mentioned, this paper refers to the necessity of fisheries cooperation between Korea, China, and Japan. Next, it analyzed the joint control cases of Norway/Russia Management of Shared Fish Stocks in the Barents Sea, Management of South Tasman Rise in Orange roughy, Agreement on Fisheries between the European Economic Community and the Kingdom of Norway, Conservation and management of pollack resources in the central Bering Sea, and drew a conclusion for ourselves. Last of all, it suggests a step-by-step strategy of promoting joint control between three countries, and the plan of the establishing and managing the organization of joint fisheries control. About the joint control, "The Joint Statement of promoting collaboration between Korea, China, and Japan" has been announced at ASEAN in October 7th, 2003 and the summit talk of the three countries. In the joint statement, the three countries came to an agreement which says, "Cooperation in Fishery Resource Conservation : The three countries will cooperate, bilaterally or trilaterally, to promote the sustainable use and conservation of fishery resource through the effective fishery management". Not only the consistent collaboration between the government is necessary, but also continuous exchange and related study on a Non-governmental level is also needed for the viable outcome in the near future. When deducting the result for the joint fisheries control, this writer hopes the contents of this study will be helpful.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.13-21
• /
• 2006

Due to the exhaustion of resources and increasing concerns about the environment, reverse logistics has become a critical issue in recent years. We discuss the conventional logistics operations and the reverse logistics operations in the automotive industry. The traditional supply chain (TSC) and the reverse supply chain (RSC) models are developed to compare performance between two systems. In addition, results of the simulation models are discussed in respect to total costs, inventory levels and stock-outs to analyze the effects of introducing of reverse logistics system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.171-179
• /
• 2015

Recently, development of substitution aggregate is urgently needed because aggregate shortage is continuing due to the exhaustion of natural aggregate and strict restrictions of environment in construction industry. Therefore, In this study, new processing method to solve the problems of processing method of existing converter slag, namely, rapid cooling slag produced by the rapid cooling and crushing process of the high temperature melten slag into the rotary drum and then using the cooling water, compressed air and steel ball was examined fundamental properties for utilize as fine aggregate for concrete. In addition, through this study, we propose the utilization method of rapid cooling slag as fine aggregate for concrete.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1020-1025
• /
• 2016

In the recent, the communication market increased every year. Because of the user's demands and exhaustion of wireless resource, we needs a new technology of the communication system. The femtocell is one of the new technology of the communication system. 'Femto' means very small. By using the femtocell that made up the very small cell, the frequency efficiency increase. The femtocell has different cell environments. The Power Control is important for femtocell to avoid interference and unnecessary handover. In this paper, we propose a new femtocell power control that is improvement of handover probability and throughput. And we simulate and check the result.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.517-524
• /
• 2002

This study aims to analyse the actual conditions of Korean fishing boat being seized in Japan's EEZ and to provide the countermeasures against that problem. According to the analysis of that actual conditions, Korean fishermen are trespassing Japan's EEZ in which fishery resources are abundant because of exhaustion of fishery resources and polluted water in Korean coastal sean. In the past, That behavior was not illegal. Now, however, it became illegal with the effectuation of the United National Conventions on the Law of the Sea(1994) and the Korean-Japanese Fisheries Agreement(1999). In order to resolve that problem on a long-term basis, it is necessary to turn over national fishery policy, to provide fishing people with other means of living, and to establish the Korean-Japanese cooperation system of fishery management. Most of all, it is urgent to mitigate and remit a penalty which was executed in Japan, to amplify personal and material resources need to guide and control fishery, and to construct a close cooperation system between the National Maritime Policy Agency and the Ministry of Maritime and Fisheries Affairs.