• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.2
• /
• pp.169-176
• /
• 2020

There is a growing interest in hydrogen energy utilization since an alternative energy development has been demanded due to the depletion of fossil fuels. Hydrogen is produced by the reforming reaction of natural gas and biogas, and the electrolysis of water. An solid oxide electrolyte cell (SOEC) is reversible system that generates hydrogen by electrolyzing the superheated steam or producing the electricity from a fuel cell by hydrogen. If the water can be converted into steam by waste heat from other processes it is more efficient for high-temperature electrolysis to convert steam directly. The reasons are based upon the more favorable thermodynamic and electrochemical kinetic conditions for the reaction. In the present study, steam at over 180℃ and 3.4 bars generated from a boiler were converted into superheated steam at over 700℃ and 3 bars using a cylindrical steam superheater as well as the waste heat of the exhaust gas at 900℃ from a solid refuse fuel combustor. Superheated steam at over 700℃ was then supplied to a high-temperature SOEC to increase the hydrogen production efficiency of water electrolysis. Computational fluid dynamics (CFD) analysis was conducted on the effects of the number of 90° elbow connector for piping, insulation types and insulation layers of pipe on the exit temperature using a commercial Fluent simulator. For two pre-heater injection method of steam inlet and ceramic wool insulation of 100 mm thickness, the highest inlet temperature of SOEC was 744℃ at 5.9 bar.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.434-442
• /
• 2010

This study was carried out to determine necessary conditions for optimal ventilation of small windowless piglet house (4.0 (W) $\times$ 11.0 (L) $\times$ 2.6(H) m) with corridor and attic for preheating using CFD (Computational Fluid Dynamics) simulation. The experimental weaning piglet house was consisted of a corridor, an attic, 4 rooms (3.0 (W) $\times$ 2.75(L) m), 3 fences (0.7(H) m), 5 air inlets and 2 exhaust fans (0.4 (D) m) and simulated using CFD code, FLUENT. The simulation results for the experimental weaning piglet house showed that each room was uniformly ventilated under all the experimental conditions and air velocities at 0.1 m above floor are less than 0.15 m/s for 0.75 m/s and 1.0 m/s of air inlet velocity but 0.61 m/s for 1.25 m/s. The simulation results are similar to the measured results. Considering the air flow pattern, ventilating efficiency, air velocity at 0.1 m above floor and cold stress of weaning piglets and so on, the optimum velocity of air inlet might be 1.0 m/s.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1575-1580
• /
• 2017

The electric vehicle business is important because it can reduce 30% of the fine dust generated in the metropolitan area and it can solve the air pollution problem by replacing automobile exhaust gas from an internal combustion engine with eco-friendly electric cars. For the construction of the electric charging station infrastructure, which is the core part of the electric car business, we focus to select the optimal location of the electric car charging station in Seoul. The goal of this paper is to utilize and analyze the traffic statistics of T-Map navigation users data and Seoul Metropolitan Transportation Policy Department to deploy the electric cars charging station with optimal location to increase the efficiency. In this paper, the proposed algorithm is composed of two parts of electric charging station selection. First, we analyze real traffic statistics and area. Second, we utilize T-Map navigation data distribution. To select optimal electric charging station location, we apply these two algorithms.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.175-180
• /
• 2013

We developed the contamination prevention module of an optical window for an In-Situ Particle Monitor (ISPM) system. the core part of the module is the generator of an ultrasonic wave and the module is to remove particles stuck to the window by the transfer of the wave force to the window surface. In order to enhance transfer efficiency of the waves the frequency of the ultrasonic wave was optimized and a low impedance material (plexiglass) and a soft sealing material (Si rubber) were used. The ISPM with the developed module was installed at the exhaust line of a BPSG CVD equipment and the effect of the module was verified.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.7-13
• /
• 2003

This study was carried out to optimize premixed burner and heat exchanger of the condensing gas boiler which can save energy by utilizing latent heat of combustion gas and reduce pollutant in exhaust gas. The heat exchanger of the gas boiler was composed of three parts, which were an upper, lower, and coil heat exchanger. The upper heat exchanger was placed outside of the premixed burner and a lower heat exchanger was located under the upper heat exchanger. And, coil heat exchanger rounded the outer surface of an upper and lower heat exchanger. The boiler designed by this research reaches turn-down ratio 4:1 in the domain of equivalence ratio 0.75${\~}$0.8 and thermal efficiency of $97\%$. Emission of NOx and CO concentration was under 20ppm and 140ppm at equivalence ratio 0.8. When diameter of the burner is replaced from 60mm to 50mm, emission of CO was reduced about 50ppm remarkably.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.11-19
• /
• 2021

Contrails are line-shaped clouds formed by the condensation of water vapor from the interaction of exhaust gas from aircraft engines and the high-altitude atmosphere. Contrails are known to aggravate global warming by creating a greenhouse effect by absorbing or reflecting radiation emitted from the Earth. In this study, development of a model that can quantitatively predict the contrail occurrence was conducted for the reduction of contrail, which is likely to form an aircraft certification category in the future. Based on prior research results, a model that can predict the occurrence of contrail between Tokyo and Qingdao was developed, in addition to proposing improved flight altitude that can minimize the occurrence of contrail.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.574-580
• /
• 2019

Conventional energy efficient routing protocols apply high weight to energy among routing metrics, causing nodes to concentrate on energy efficient paths and quickly exhaust energy on those paths. The unbalanced energy consumption of these wireless sensor networks causes network division and malfunction, and reduces network lifetime. Therefore, in this paper, it proposes a link cost based routing protocol to solve the unbalanced energy consumption of wireless sensor networks. The proposed routing protocol calculates the link cost by applying the weight of the routing metric differently according to the network problem situation and selects the path with the lowest value. As a result of the performance analysis, it confirmed that the proposed routing protocol has 22% longer network life, 2% energy consumption standard deviation and 2% higher data reception rate than the existing AODV protocol.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.131-138
• /
• 2019

Diesel engines have important advantages over its gasoline counterpart including high thermal efficiency, high fuel economy and low emissions of CO, HC and $CO_2$. However, NOx reducing is more difficult on diesel engines because of the high $O_2$ concentration in the exhaust, marking general three way catalytic converter ineffective. Two method available technologies for continuous NOx reduction onboard diesel engines are Urea-SCR and LNT. The implementation of the Urea-SCR systems in design engines have made it possible for 2.5l and over engines to meet the tightened NOx emission standard of Euro-6. In this study, we investigate the characteristics of NOx reduction with respect to engine speed, load, types of catalyst and the $NH_3$/NOx ratio and present the conditions which maximize NOx reduction. Also we provide detailed experimental data on Urea-SCR which can be used for the preparation for standards beyond Euro-6.

• Journal of Information Technology Applications and Management
• /
• v.25 no.3
• /
• pp.17-28
• /
• 2018

In this paper, an activity-oriented usability model is proposed. The usability model contains two types of characteristics: special-type characteristics of usability and sub-characteristics of usability. Workability, study-ability, and playability are, but do not exhaust, examples of special-type characteristic of usability. They correspond to working, studying, and playing using the software product, respectively. They represent the goal of using and can overlap each other. They are usability too by themselves. Navigate-ability, data-prepare-ability, data-input-ability, response-wait-ability, output-examine-ability, and output-utilize-ability are typical examples of sub-characteristics of usability. They correspond to navigating, preparing data, inputting data, waiting response, examining output, and utilizing the output data, respectively. They are not usability by themselves. They constitute usability together as a group. Assessing is the fundamental and indispensable aspect of quality. Without assessing, the concept of quality has little practical value. Satisfaction, effectiveness, and efficiency are the most typical sub-characteristics of usability in existing quality models, which correspond to the evaluation criteria of usability. In the activity-oriented usability model, however, only the user's satisfaction is included: Satisfaction is regarded as the operational definition of usability in the user's view. As the result, usability can be interpreted as the 'goodness for using, which is evaluated by the user. 'Three fundamental principles regarding software quality models are proposed too in this paper: Principles of Parsimony, Cohesiveness, and Inheritance. Discussions illustrate well that typical existing usability models violate these basic principles. Many authors have tried to define general usability models which can be applied to most kinds of software. The dream of the general and universal usability model, however, may be an illusion. The activity-oriented usability model is expected to serve as a prototype from which specialized usability models can be derived.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.344-351
• /
• 2023

The membrane separation process for carbon dioxide capture from hydrogen reformer exhaust gas has been developed. Using a commercial membrane module, a multi-stage process was developed to achieve 90% of carbon dioxide purity and 90% of recovery rate for ternary mixed gas. Even if a membrane module with being well-known properties such as material selectivity and permeability, the process performance of purity and recovery widely varies depending on the stage-cut, the pressure at feed and permeate side. In this study, we verify the limits of capture efficiency at single-stage membrane process under various operating conditions and optimized the two-stage recovery process to simultaneously achieve high purity and recovery rate.