• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1801-1805
• /
• 2002

The graphite intercalation compounds(GIC) were prepared by a dry process that led to the intercalation from the direct reaction of gaseous $SO_3$ with flake type graphite. The basal spacing of the GIC was increased from 8.3 ${\AA}$ to 12 in the gallery height. The ejection of interlayer $SO_3$ molecules by the heating for 1 minute at $950^{\circ}C$ resulted in an exfoliated graphite (EG) with surprisingly high expansion in the direction of c-axis. The expansion ratios of the exfoliated graphites were increased greatly between 220 times and 400 times compared to the original graphite particles, and the bulk density was range of 0.0053 to 0.01 $g/cm^3$, depending on reaction time. The pore size distribution of exfoliated graphite was in the range of $10-170{\mu}m$, which exhibites both mesoporosity and macroporosities. This result indicates that the direct reaction of graphite paricles with gaseous $SO_3$ can be proposed as an another route for the exfoliated graphite having excellent physical properties.

• Carbon letters
• /
• 제2권1호
• /
• pp.1-8
• /
• 2001

Exfoliated graphite was found to sorb selectively a large amount of heavy oil, about 80 g of heavy oil floating on water per 1 g of exfoliated graphite, which is highly possible to be applied to recovering spilled heavy oil. Sorption capacity, selectivity and kinetics of exfoliated graphite were reviewed. The possibility of recovery of heavy oil from exfoliated graphite and recycling of both recovered heavy oil and exfoliated graphite was also discussed. Its sorption performance was compared with other materials which were reported to show sorption of heavy oil.

• Carbon letters
• /
• 제2권1호
• /
• pp.55-60
• /
• 2001

Graphite intercalation compounds (GIC) were prepared by direct reaction of $SO_3$ gas with flake graphite. The intercalated $SO_3$ molecules were ejected by rapid heating to $950^{\circ}C$ under an oxidizing atmosphere for about 1 minute, resulting in surprisingly high expansion in the direction of c-axis. The characteristics of the micro-structure and pore size distribution were examined with a SEM and mercury intrusion porosimetry. The XRD analysis and spectroscopic analysis were used for the identification of the graphite and surface chemistry state. The pore size distribution of the exfoliated graphite (EG) was a range of $1{\sim}170{\mu}m$. The higher expanding temperature the higher expanded volume, so oil sorption capacities were 58.8 g of bunker-C oil and 34.7 g of diesel oil per 1 g of the the EG. The sorption equilibrium was achieved very rapidly within several minutes. As the treatment temperature increases, bulk density decreases.

• Bulletin of the Korean Chemical Society
• /
• 제19권10호
• /
• pp.1113-1116
• /
• 1998

A new graphite intercalation compound (GIC), n-octylammonium tetrachlorofeffate(Ⅲ)-graphite, has been derived from well-known ferric chloride graphite intercalation compound. X-ray diffration study shows that the basal spacing of this new GIC is 20.8 Å. In order to investigate the local geometry around the iron atom in the graphite layers, X-ray absorption spectroscopy experiments were performed. The first discharge capacity of its exfoliated form is found to be 862 mAh/g, which is more than double the value of pristine graphite (384 mAh/g). Such a drastic increase implies that the exfoliated graphite is a promising electrode material.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.209-214
• /
• 2012

In this work, the reduced graphene nanosheets were synthesized from pre-exfoliated graphite flakes. The pristine graphite flakes were firstly pre-exfoliated to graphite nanoplatelets in the presence of acetic acid. The obtained graphite nanoplatelets were treated by Hummer's method to produce graphite oxide sheets and were finally exfoliated to graphene nanosheets by ultrasonication and reduction processes. The prepared graphene nanosheets were studied by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM), and transmission electron microscopy (TEM). From the results, it was found that the preexfoliation process showed significant influence on preparation of graphite oxide sheets and graphene nanosheets. The prepared graphene nanosheets were applied to the preparation of conductive materials, which yielded a greatly improved electrical resistance of $200{\Omega}/sq$.

• 한국포장학회지
• /
• 제19권2호
• /
• pp.95-102
• /
• 2013

고밀도 폴리에틸렌(High density polyethylene, HDPE)을 수분에 민감한 전기전자제품, 의약품 등을 위한 하이배리어 패키징 소재로써 적용하기 위해서 높은 가로세로비(High aspect ratio)를 가진 Exfoliated graphite (이하 EFG)를 필러로 도입하였다. 또한, 효과적인 분산성과 혼화성을 위해서 상용화제를 첨가하여 HDPE/EFG 나노복합필름을 제조하였다. HDPE/EFG 나노복합필름의 EFG 함량에 따른 화학적 특성, 모폴로지(Morphology), 열적 특성 및 수분차단 특성을 조사하였다. HDPE와 EFG 사이에 화학적 결합이나 상호작용이 약하지만, EFG를 첨가함에 따라 수증기 투과도는 127에서 78 (70 ${\mu}m{\cdot}g/m^2$, $day{\cdot}atm$)까지 감소되었다. 특히, HDPE/EFG 나노복합필름은 EFG의 함량이 0.5%일 때 가장 효과적이며, 그 이상의 함량에서는 물성이 향상되지 않았다. 따라서, 물성의 극대화를 위해서는 EFG의 분산성 향상 및 HDPE와 EFG의 화학적 결합 등의 혼화성 개선에 관한 추가적인 연구가 필요하다.

• Carbon letters
• /
• 제13권2호
• /
• pp.121-125
• /
• 2012

In the present work, exfoliated graphite nanoplatelets (EGN) of 1 ${\mu}m$ in average particle size, which were prepared by heating at $900^{\circ}C$ and then subjected to ultrasonic, ball-milling, and vibratory ball-milling techniques, were uniformly incorporated into phenylethynyl-terminated polyimide (PETI-5) resin. The fracture surface morphology and the electrical resistivity of the EGN/PETI-5 composites were investigated. The results showed that the fracture surfaces and the electrical resistivity strongly depended on the EGN content. The fracture surfaces became more ductile and roughened with increasing EGN and the electrical resistivity was gradually decreased with increased EGN loading, indicating the percolation threshold at 5 wt% EGN.

• Carbon letters
• /
• 제19권
• /
• pp.1-11
• /
• 2016

In efforts to characterize and understand the properties and processing of phenylethynyl-terminated imide (LaRC PETI-5, simply referred to as PETI-5) oligomers and polymers as a high-temperature sizing material for carbon fiber-reinforced polymer matrix composites, PETI-5 imidization and thermal curing behaviors have been extensively investigated based on the phenylethynyl end-group reaction. These studies are reviewed here. In addition, the use of PETI-5 to enhance interfacial adhesion between carbon fibers and a bismaleimide (BMI) matrix, as well as the dynamic mechanical properties of carbon/BMI composites, are discussed. Reports on the thermal expansion behavior of intercalated graphite flake, and the effects of exfoliated graphite nanoplatelets (xGnP) on the properties of PETI-5 matrix composites are also reviewed. The dynamic mechanical and thermal properties and the electrical resistivity of xGnP/PETI-5 composites are characterized. The effect of liquid rubber amine-terminated poly(butadiene-co-acrylonitrile) (ATBN)-coated xGnP particles incorporated into epoxy resin on the toughness of xGnP/epoxy composites is examined in terms of its impact on Izod strength. This paper provides an extensive overview from fundamental studies on PETI-5 and xGnP, as well as applied studies on relevant composite materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.583-584
• /
• 2012

• Composites Research
• /
• 제26권4호
• /
• pp.254-258
• /
• 2013

본 연구에서는 폴리프로필렌과 다양한 탄소나노소재를 사용하여 제조한 복합재의 압출방향 및 권취속도에 따른 기계적 물성과 결정화도에 대한 연구를 수행하였다. 폴리프로필렌에 탄소나노소재를 균일하게 분산시키기 위해 미분쇄기에 폴리프로필렌 분말(<700 ${\mu}m$)과 탄소나노소재를 혼합한 후 나노복합재 필름 제조를 위해 압출기를 사용하였다. 나노복합재 필름의 결정화도를 분석하기 위해 differential scanning calorimetry를 이용하였다. 기계적 물성을 인장시험을 통해서 측정한 후 순수 폴리프로필렌 물성과 비교하였고, 압출 시 필름 권취속도에 대한 나노복합재 결정화도의 차이를 확인하였다. 탄소나노소재를 첨가함으로써 고분자 필름의 기계적 물성이 향상됨을 확인하였고, 그에 따른 결정화도 역시 증가하는 것을 확인하였다. 반면, 권취속도가 증가 할수록 압출물의 냉각속도도 역시 증가함으로써 결정화도가 오히려 감소함을 확인하였다.