• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1000-1007
• /
• 2007

Recently, many critical control systems are developed using formal methods. When software applied to such systems is developed, the employment of formal methods in the software requirements specification and verification will provide increased assurance for such applications. Earlier error of overlooked requirement specification can be detected using formal specification method. Also the testing and full verification to examine all reachable states using model checking to undertake formal verification are able to be completed. In the comparison of other formal specification methods, we choose the Z formal language for applying to the train control system. Using Z is able to realize higher correctness in the requirement specification, and we propose the Statemate of the best solution in formal verification tools for the system modeling and verification. The Statemate makes it possible to prove thoroughly the system execution from the simple graphical modeling of the complicated train control system. Then we can expect that the model-based formal method combining Z with Statemate will be utilized widely for the railway systems due to various strong points.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.619-626
• /
• 2018

Most publications confirm that an ecological interface is a very efficient tool to supporting operators in recognition of complex and unusual situations and in decision-making. The present article describes the experience of implementation of an ecological interface concept for visualization of material balance in a drum separator of RBMK-type NPPs. Functional analysis of the domain area was carried out and revealed main factors and contributors to the balance. The proposed ecological display was designed to facilitate execution of the most complicated cognitive operations, such as comparison, summarizing, prediction, etc. The experimental series carried out at NPPs demonstrated considerable reduction of operators' mental load, time of reaction, and error rate.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.8
• /
• pp.658-666
• /
• 1989

In this paper, an efficient algorithm for estimation volume and surface area and a reconstruction algorithm for 3-dimensional graphics are presented.In order to improve computing efficiency, the graph theory is utilized and the algorithm to obtain proper contour points is developed by considering several tolerances. Search for the contour points is limited by the change of curvature of cross sectional contour to provide efficiency in searching the minimum cost path. In computer simulation of these algorithms, the results show that, for the tolerance values of 1.001 and 1.002, the execution time reduced to 66%-80% and the error for the measured value is less than 3%. The reconstructed 3-dimensional images from the cross sections can be analyzed in many directions using the graphic scheme.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.69-74
• /
• 2004

Selectivity estimation for spatial query is very important process in finding the most efficient execution plan. Many works have been performed to estimate accurately selectivity. Although they deal with some problems such as false-count, multi-count, they require a large amount of memory to retain accurate selectivity, so they can not get good results in little memory environments such as mobile-based small database. In order to solve this problem, we propose a new technique called MW histogram which is able to compress summary data and get reasonable results. It also has a flexible structure to react dynamic update. The experimental results showed that the MW histogram has lower relative error than MinSkew histogram and gets a good selectivity in little memory.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.737-742
• /
• 2009

This research intends to clarify the engineering characteristics of compression index which plays the most important role in the calculation of consolidation settlement, based on the survey of the clay in the estuary of Nakdong River. In addition, it will analyze the parameters of soil and the correlation between the parameters and the existing relation, especially the correlation with compression index, through which it will propose a proper relation for the parameters of clay in this area. As a result of the study, the relation between the settlement and the compression rate using compression index showed 13% settlement error on the average. It is judged that this number can be used for forecasting the consolidation characteristics and the settlement for brief (preliminary) design when the difference between the execution settlement and the measuring settlement is regarded to be 15%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1095-1100
• /
• 2000

Concrete structure often exhibit cracks due to the combination of material construction and design error. Minor crack can be tolerated depending on exposure condition, but major cracks are aesthetically unpleasant and affect the durability and safety of the structure. All of the reinforced concrete structure have many inevitable cracks for various reason such as drying shrinkage, heat liberation of cement and over loads. Epoxy resin injection widely used for repairing cracks in concrete is too sensitive to high temperature. Besides, the problem in the epoxy resin injection is the difficulty of quality control after execution. Whereas, Ultra Fine Cement is similar in coefficient of thermal expansion and modulus of elasticity to concrete. The objective of the study is to find out that it is possible for Ultra Fine Cement to be used for repairing cracks in reinforced concrete.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.81-84
• /
• 1998

Genetic Algorithms (GAs) are stochastic algorithms whose search methods model some natural phenomena. The procedure of GAs may be divided into two sub-procedures : Operation and Selection. Chromosomes can produce new offspring by means of operation, and the fitter chromosomes can produce more offspring than the less fit ones by means of selection. However, operation which is executed randomly and has some limits to its execution can not guarantee to produce fitter chromosomes. Thus, we propose a method which gives a directional information to the genetic operator by reinforcement learning. It can be achived by using neural networks to apply reinforcement learning to the genetic operator. We use the amount of fitness change which can be considered as reinforcement signal to calcualte the error terms for the output units. Then the weights are updated using backpropagtion algorithm. The performance improvement of GAs using reinforcement learning can be measured by applying the pr posed method to GA-hard problem.

• Journal of Information Technology Applications and Management
• /
• v.10 no.4
• /
• pp.135-147
• /
• 2003

With the development of multimedia and optical technologies, application systems with facial features hare been increased the interests of researchers, recently. The previous research efforts in face processing mainly use the frontal images in order to recognize human face visually and to extract the facial expression. However, applications, such as image database systems which support queries based on the facial direction and image arrangement systems which place facial images automatically on digital albums, deal with the directional characteristics of a face. In this paper, we propose a method to detect facial directions by using facial features. In the proposed method, the facial trapezoid is defined by detecting points for eyes and a lower lip. Then, the facial direction formula, which calculates the right and left facial direction, is defined by the statistical data about the ratio of the right and left area in facial trapezoids. The proposed method can give an accurate estimate of horizontal rotation of a face within an error tolerance of $\pm1.31$ degree and takes an average execution time of 3.16 sec.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.1
• /
• pp.76-84
• /
• 1992

The vision system is essential for SMT(Surface Mounting Technology) automation. The system plays the role of matching the positions betweem SMD and PCB, and inspecting SMD in the final stage of mounting. Real-time processing and high-precision are indispensable for practical purpose. In this paper, a new algorithm for position matching and inspection of SMD is proposed, and which is implemented on the DSP board using DSP board using DSP5600. Experimental results show mean matching error within 0.1 mm in the direction of x,y and execution time within 300msec. Therefore, we could attain high-speed and high-precision of the vision system for SMT automation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.303-308
• /
• 1998

As the technology of industrial automation using robot system grows the rapid advance, productivity improvement and decrease in number of maintenance, management occur in many fields. Therefore, more various and intelligent robot motions are needed without human being help. Considering this situation, the need of robot with various, fast and safe acting sensors are demanded. In these sensings, the slippage sensing gives us specific information between ripper and object while grasps the object. In this paper, we proposed new slippage sensing algorithm for various and intelligent robot motion. So, optimal grasping force control and compensation of position error is possible for an adaptive task execution using adaptive control.