• Title/Summary/Keyword: Exchange & Communication

Search Result 1,214, Processing Time 0.027 seconds

A Study on Efficient IPv6 Address Allocation for Future Military (미래 군을 위한 효율적인 IPv6 주소 할당에 관한 연구)

  • Hanwoo Lee;Suhwan Kim;Gunwoo Park
    • The Journal of the Convergence on Culture Technology
    • /
    • v.9 no.5
    • /
    • pp.613-618
    • /
    • 2023
  • The advancement of Information and Communication Technology (ICT) is accelerating innovation across society, and the defense sector is no exception as it adopts technologies aligned with the Fourth Industrial Revolution. In particular, the Army is making efforts to establish an advanced Army TIGER 4.0 system, aiming to create highly intelligent and interconnected mobile units. To achieve this, the Army is integrating cutting-edge scientific and technological advancements from the Fourth Industrial Revolution to enhance mobility, networking, and intelligence. However, the existing addressing system, IPv4, has limitations in meeting the exponentially increasing demands for network IP addresses. Consequently, the military considers IPv6 address allocation as an essential process to ensure efficient network management and address space provisioning. This study proposes an approach for IPv6 address allocation for the future military, considering the Army TIGER system. The proposal outlines how the application networks of the Army can be differentiated, and IP addresses can be allocated to future unit structures of the Army, Navy, and Air Force, from the Ministry of National Defense and the Joint Chiefs of Staff. Through this approach, the Army's advanced ground combat system, Army TIGER 4.0, is expected to operate more efficiently in network environments, enhancing overall information exchange and mobility for the future military.

Hybrid Offloading Technique Based on Auction Theory and Reinforcement Learning in MEC Industrial IoT Environment (MEC 산업용 IoT 환경에서 경매 이론과 강화 학습 기반의 하이브리드 오프로딩 기법)

  • Bae Hyeon Ji;Kim Sung Wook
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.12 no.9
    • /
    • pp.263-272
    • /
    • 2023
  • Industrial Internet of Things (IIoT) is an important factor in increasing production efficiency in industrial sectors, along with data collection, exchange and analysis through large-scale connectivity. However, as traffic increases explosively due to the recent spread of IIoT, an allocation method that can efficiently process traffic is required. In this thesis, I propose a two-stage task offloading decision method to increase successful task throughput in an IIoT environment. In addition, I consider a hybrid offloading system that can offload compute-intensive tasks to a mobile edge computing server via a cellular link or to a nearby IIoT device via a Device to Device (D2D) link. The first stage is to design an incentive mechanism to prevent devices participating in task offloading from acting selfishly and giving difficulties in improving task throughput. Among the mechanism design, McAfee's mechanism is used to control the selfish behavior of the devices that process the task and to increase the overall system throughput. After that, in stage 2, I propose a multi-armed bandit (MAB)-based task offloading decision method in a non-stationary environment by considering the irregular movement of the IIoT device. Experimental results show that the proposed method can obtain better performance in terms of overall system throughput, communication failure rate and regret compared to other existing methods.

A Hermenutic Phenomenological Study of Psychological Burnout Experiences due to Emotional Contagion (정서전염으로 인한 심리적 소진 경험에 관한 해석현상학적 연구)

  • Hyunju Ha;Jinsook Kim;Doyoun An
    • Korean Journal of Culture and Social Issue
    • /
    • v.30 no.2
    • /
    • pp.121-157
    • /
    • 2024
  • This study explored the essence of psychological burnout experiences due to emotional contagion using a hermeneutic phenomenological approach. In-depth interviews were conducted on 9 participants who work in fields that are subject to emotional contagion. Data analysis was conducted by using van Manen's methodology, insisting that the pure description of an experience can be enriched by adding interpretation. The emotional contagion experiences were identified through this process and the findings were categorized into 3 core themes, 8 essential themes, and 35 subthemes. The first core theme is "emotions in constant exchange". This theme included two essential themes: 'various channels of emotional contagion' and 'subjective states that change depending on the transmitted emotions'. The second core theme, "filtering the experience of emotional contagion" included the essential themes of 'the characteristics susceptible to the emotions of others', 'attitudes of spreading negative emotions' and 'situations that makes one feel overwhelmed by emotions'. The final core theme, "from burnout by emotional contagion to communication" was categorized into the following essential themes: 'burnout-inducing entangled interactions', 'moving toward communication and connection' and 'recovery after psychological burnout'. Finally, the implications and suggestions for future research were discussed by summarizing the core contents of each themes.

A Study on DTS Data Modeling for MVDC Integrated Operation (MVDC 연계 운용을 위한 DTS 데이터 모델링에 관한 연구)

  • Chae-Young Lim;Yeong-Su Park
    • The Journal of the Convergence on Culture Technology
    • /
    • v.10 no.6
    • /
    • pp.855-861
    • /
    • 2024
  • The power industry is undergoing a rapid transformation with the adoption of smart grid standards, advanced communication infrastructure, and new technologies for distributed power. MVDC (Medium Voltage Direct Current) technology plays a vital role in promoting efficient energy transmission and reducing greenhouse gas emissions, necessitating a structured architecture for stable management. This paper implements services defined in IEC 61850 and IEC 62541, defining a Virtual Manufacturing Device (VMD) to objectify the DTS (Digital Twin System). The VMD abstracts essential functions for control and monitoring, which are realized in DTS to enhance capabilities. The objectified DTS data facilitates server-client data exchange. Additionally, the proposed DTS-MS communication protocol defines transmitted data in JSON for remote access, providing node functionality for MVDC testing environments. The paper analyzes reference models for Digital Twin, proposes an Ethernet-based DTS architecture using international standards, and verifies the real-time performance improvements of the proposed system through mathematical simulations.

The Strategic Approach to FTA Governmental Negotiation Method between China (중국과의 FTA 협상방식을 위한 전략적 접근)

  • Na, Seung-Hwa
    • The Journal of Industrial Distribution & Business
    • /
    • v.1 no.1
    • /
    • pp.13-21
    • /
    • 2010
  • Since Korea establish diplomatic ties with China in 1992, korea and China have had rapid progress in most of field as politic, economy, society and culture through basing on cultural commonality and geographical adjacency. Especially, China is the biggest trading partner to korea, and also Korea is third-biggest trading country to China. They become strategic cooperating relation in 2008. Currently, in terms of international trade relation, WTO/DDA negotiation is proceeding in difficulty, but FTA has been growing and extending in the world, and the two country, china and korea, have been competitively trying wide and active FTA negotiation promotion. After Financial crisis in 1997, according to the requirement of local economic cooperation, China has shown the interest to several countries since the conclusion of FTA treaty with ASEAN in 2005. China also makes the active afford to conclude FTA with Korea. Last May 28th, this was mentioned in the meeting between president Lee and Premier Wen Jiabao, so it is anticipated that the negotiation for FTA will be started in the near future. There are many political suggestions and concerns in terms of way of negotiation korea would choose. Some economist said that "'Continuous FTA aimed at long-term protocol should be promoted between korea and China and negotiated includingly'" However, this research claims that commodity exchange, service, and investment areas should be included and it has to be comprehensive package settlement style in negotiation. This research has found out the characteristics of China's negotiation and implications through the China's existed FTA negotiation examples. Currently, China has taken Continuous or a phase-negotiation method to ASEAN, Pakistan, Chile and some other developing country and to advanced countries like New Zealand or Singapore, comprehensive package settlement method is used in FTA negotiation. In consider of the FTA negotiation between Korea and China, Korea has some problems in the commodity change area in agriculture maket's opening. While, for china, the issues would happen in service trade area, especially when encountering finance and communication industries are opened, China's economy could be exposed to some risk. In result, Korea should expand its negotiation range from commodity trade to service trade, in order to exchange both issues, then the negotiation will be concluded more easily. In other word, for FTA, korea should follow comprehensive package settlement way that is similar to New zealand and Singapore case. Through this kind of method, Korea can expect effect of creating trade, conversion of it and preoccupancy of service field in china's market against the advanced countries like Usa, Europe and Japan. Also, to have a successful FTA negotiation, korea should find out china's policy for FTA negotiation. With this information, korea will be able to suggest the way to make a profit. Systematic analysis and comparison about previous negotiation cases of china are needed before the negotiation begin.

  • PDF

On the Nighttime Correction of CO2 Flux Measured by Eddy Covariance over Temperate Forests in Complex Terrain (복잡지형의 온대산림에서 에디 공분산으로 관측된 CO2 플럭스의 야간 자료 보정에 관하여)

  • Kang, Minseok;Kim, Joon;Kim, Hyun-Seok;Thakuri, Bindu Malla;Chun, Jung-Hwa
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.16 no.3
    • /
    • pp.233-245
    • /
    • 2014
  • Nighttime correction of $CO_2$ flux is one of the most important and challenging tasks in eddy covariance measurements over a complex mountainous terrain. In this study, we have scrutinized the quality and the credibility of the $CO_2$ flux datasets which were produced by employing three different methods of nighttime correction, i.e., (1) friction velocity ($u^*$) correction, (2) light response curve (LRC) correction, and (3) advection-based van Gorsel (VG) correction. The whole year datasets used in our analysis were collected at the two KoFlux tower sites (i.e., GDK deciduous forest site at the upper hill and GCK coniferous forest site at the lower hill) located in the valley of Gwangneung National Arboretum in central Korea. The resultant magnitudes and patterns of ecosystem respiration ($R_E$), gross primary productivity (GPP), and net ecosystem exchange (NEE) of $CO_2$ showed marked differences among the datasets produced with three different correction methods, which were also site-specific. The examination from micrometeorological and ecological perspectives suggests that the major cause of some inconsistency seems to be associated with the advection of $CO_2$ along the sloping terrain and the inappropriate selection of the correction data that might have been already affected by advective flows. The comparison with the results from other studies indicated that the overall characteristics of the corrected $CO_2$ fluxes at GDK and GCK (except those with LRC correction) were well within the ranges reported in the literature for various ecosystems in East Asia in similar latitudes. However, our study also implies that there will be always a room for further improvement in the present datasets. Therefore, caution must be exercised for the data users in order to properly use the updated version of datasets through transparent, open and participatory communication with data producers.

A Study on the Improvement of Flexible Working Hours (유연근로시간제 개선에 대한 연구)

  • Kwon, Yong-man;Seo, Ei-seok
    • Journal of Venture Innovation
    • /
    • v.4 no.2
    • /
    • pp.97-108
    • /
    • 2021
  • Labor contracts appear in form as an exchange relationship between labor products and wages, but since they transcend the level of simple barter, they can be economically identified as "trading" and can be identified as "rental." From a legal point of view, a legal device that legally supports and imposes binding force on commodity exchange relations is a contract. Such a labor contract led to a relationship in which wages were received and a certain amount of time was placed under the direction and supervision of the employer as a counter benefit to the receipt of wages. Since working hours are subordinate hours with one's labor under the disposition authority of the employer, long hours of work can be done for the health and safety of workers and furthermore, it can be an act that violates the value to enjoy as a human being. The reduction of working hours needs to be shortened in terms of productivity and enjoyment of workers' culture so that they can expand and reproduce, but users' corporate management labor and production activities should also be compatible compared to those pursued by capitalist countries. Working hours can be seen as individual time and time in society as a whole, and long hours of work at the individual level are reduced, which is undesirable at the individual level, but an increase in products due to an increase in production time at the social level can help social development. It is necessary to consider working hours in terms of finding the balance between these individual and social levels. If the regulation method of working hours was to regulate the total amount of working hours, flexibility and elasticity of working hours are a qualitative regulation method that allows companies to flexibly allocate and organize working hours within a certain range of up to 52 hours per week. Accordingly, it is necessary to shorten working hours, but expand and implement the flexible working hours system according to the situation of the company. To this end, it is necessary to flexibly operate the flexible working hours system, which is currently limited to six months, handle the selective working hours by agreement between employers and workers, and expand the target work of discretionary working hours according to the development of information and communication technology and new types based on the 4th industrial revolution.

A Study on Comparison of Commercial Arbitration System in Korea and U.S.A. (한국과 미국의 상사중재제도에 관한 비교연구)

  • 이강빈
    • Journal of Arbitration Studies
    • /
    • v.12 no.1
    • /
    • pp.271-321
    • /
    • 2002
  • Every year, many million of business transactions take place. Ocassionally, disagreements develop over these business transactions. Many of these disputes are resolved by mediation, arbitration and out-of-court settlement options. The American Arbitration Association(AAA) helps resolve a wide range of disputes through mediation, arbitration, elections and other out-of-court settlement procedures. The AAA offers a broad range of dispute resolution services to business executives, attorneys, individuals, trade associations, unions, management, consumers, families, communities, and all level of governments. The 198,491 cases composed of the 194,303 arbitration cases and the 4,188 mediation cases, were filed with the AAA in 2000. These case filings represent a full range of matters, including commercial finance, construction, labor and employment, environmental, health care, insurance, real state, securities, and technology disputes. The Korean Commercial Arbitration Board (KCAB) does more than render arbitration services. It helps facilitate settlements and guarantee implementation thereof between trading partners at home and abroad involving disputes related to such areas as the sale of commodities, construction, joint venture agreements, technical assistance, agency agreements, and maritime transport. The 643 cases composed of the the 197 arbitration cases and the 446 mediation cases, were filed with the KCAB in 2001. There are some differences between the AAA and the KCAB regarding the number and the area of mediation and arbitration case filings, the breath of service offerings, the scope of alternative dispute resolution, and the education and training. In order to apply to the proceedings of the commercial mediation and arbitration, the AAA has the Commercial Mediation Rules, the Commercial Arbitration Rules, the Expedited Procedures, the Optional Procedures for Large, Complex Commerical Dispute, and the Optional Rules for Emergency Measures of Protection as amended and effective on September 1, 2000. In order to apply to the proceedings of commercial arbitration, the KCAB has the Arbitration Rules as amended by the Supreme Court on April 27, 2000, which have been changed to incorporate the revisions of the Arbitration Act that went into effect on December 31, 1999. There are some differences between the AAA's commercial Arbitration Rules and the KCAB's Arbitration Rules regarding the clauses of jurisdiction and administrative conference, number of arbitrators, communication with arbitrator, vacancies, preliminary hearing, exchange of information, oaths, evidence by affidavit and posthearing filing of documents or others, interim measures, serving of notice, form of award, scope of award, delivery of award to parties, modification of award, release of liability, administrative fees, neutral arbitrator's compensation, and expedited procedures. In conclusion, for the vitalization of KCAB and its ADR system, the following measures should be taken : the effective case management, the development of on0-line ADR, the establishment of ADR system of electronic commerce disputes, and the variety of dispute resolution rules in each expert field.

  • PDF

Design and Implementation of a Transparent Security Infrastructure using Filter and Transformer (필터와 트랜스포머를 이용한 투명한 보안기반의 설계 및 구현)

  • Kim, Yong-Min;Lee, Do-Heon;Noh, Bong-Nam;Choi, Rak-Man;Ine, So-Ran
    • The Transactions of the Korea Information Processing Society
    • /
    • v.5 no.4
    • /
    • pp.975-983
    • /
    • 1998
  • In these days, information communication systems are based on both open distributed computing technologies and object-oriented techniques like inheritance, encapsulation and object reuse to support various system configuration and application. As information systems are interconnected through unsecure networks, the need for the secure information exchange is more critical than before. In this paper, we have designed and implemented a transparent CORBA-basce Security infrastructure with authentication, security context association, access control and security information management to support a secure applications in distributed object environment. SESAME Ver. 4 was adopted as an external security service to manage user privilege attributes and to distribute keys for data encryption, decryption and integrity. Using filter and transformer with an interface to Object Request Broker, it provides a transparent security service to applications. The filter objects are special classes that allow additional parameters to be inserted into messages before they are sent and removed just after they are received. The transformer objects are special classes that allow direct access to the byte stream of every messages for encryption and decryption before it is sent and just after it is received. This study is to implement the access control interceptor(ACI) and the secure invocation interceptor(SII) of secure ORB defined in CORBA using filter and transformer.

  • PDF

Advanced Sensor-based Building Information Modeling (BIM) for Construction, Operation, and Maintenance Phases of the Project Lifecycle (시공 및 유지관리 단계에서 활용 가능한 단센서 기반의 BIM 구축을 위한 기초연구)

  • Cho, Minwoo;Son, Hyojoo;Kim, Changmin;Lee, Joohyuk;Kim, Changwan
    • Journal of KIBIM
    • /
    • v.2 no.1
    • /
    • pp.7-17
    • /
    • 2012
  • In recent years, building information modeling (BIM) has been an important issue within the architect, engineering, and construction (AEC) industry. BIM provides a way to share and exchange semantically rich information about the buildings in order to achieve a successful level of collaboration, communication, and interaction between stakeholders throughout the life cycle of the project. However, despite the recognition of its potential, BIM has not yet been utilized in the construction, operation, and maintenance stages because of the need to reorganize the BIM by reflecting the as-built status of the buildings. In order to improve and increase the use of BIM at all phases of a project, several research efforts are exploring the creation of an as-built BIM that is based on advanced sensors. However, there is a lack of literature and investigation on this research area to date within the domestic AEC industry. The aim of this study is to suggest ways in which BIM can be utilized within the construction, operation, and maintenance stages based on advanced sensors so that it is an approach that might be usefully carried forward. This paper begins by presenting a review of the existing BIM research and achievement in order to determine the limitations of the use of BIM in the domestic AEC industry. Conclusively, this paper suggests a direction for the future applications of BIM and describes how it can benefit from additional research.