• 한국해양공학회지
• /
• 제14권3호
• /
• pp.84-89
• /
• 2000

The purpose of this study is to investigate the combustion emission characteristics by the effect of secondary air injection and variation of the excess air ratio in combustion field of model gas turbine combustor. For this purpose, mean temperature, CO, $CO_2$, $O_2$ and HC concentrations were measured by changing excess air ratio and secondary air injection. As a result of this study, mean temperature was decreased and CO, HC emission increased by increasing the excess air ratio of secondary air. Therefore, this results showed the secondary air injection effected strongly on the flame structure and combustion emission characteristics.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.46-52
• /
• 1985

(Ba0.8. Sr0.2) $TiO_3$ semiconducting ceramic with and without Ti-excess composition were prepared by various sintering temperature. The effects of Ti compositions on the samples were discussed in terms of color micro-structure resistivity at room temperature and the positive temperature coefficient resistivity(PTCR). The 1.02mol Ti-excess composition provides better PTCR properties and has uniform micrositructures with 5-7${\mu}{\textrm}{m}$.

• 한국결정학회지
• /
• 제7권1호
• /
• pp.64-72
• /
• 1996

증기압 제어를 위한 저온부를 없애고, 고온부의 단일 온도영역만으로 GaAs 단결정을 성장 시키는 단일 온도대역 수평 Bridgman(1-T HB: single temperature zone horizontal Bridgman)방식에서는 증기압에 상응할만한 반응관 내부의 압력을 As 초과 유입량의 기화에 의하여 유지해야 하므로 그 양을 정밀하게 결정해 주어야 한다. 이것을 위하여, 우선적으로 Ga-As 계에서의 열화학적 특성을 규명하였고, 이에 근거하여 단일 온도대역 수평 Bridgman 법으로 결정성장할 때의 As 초과 유입량을 GaAs 장입량, 반응관 칫수, 온도구배 등에 의한 일반해로 유도하였다. 따라서 단일 온도대역 수평 Bridgman 법에 의한 GaAs 단결정 성장의 이론적 근거를 마련하였다.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.253-264
• /
• 2010

This study investigates the relationship between daily mortality and heat stress in Seoul, using perceived temperatures (PT) derived from a heat budget model. During the summer season, observed PT intensity showed the biggest magnitude of summer heat stress from the middle 10 days of July to the first 10 days of August. The elderly (65 and above) were found to be the most vulnerable to heat stress. The threshold PT, with a significant increase in excess mortality, was $38^{\circ}C$. No time lagged effect was observed with summer heat stress, while a high correlation was observed between anomalies in PT and relative deviation of mortality. A comparison of the heat index and the discomfort index with excess mortality revealed that the discomfort index underestimated excess mortality, whereas the heat index could not appropriately explain the increase in excess mortality correlated with the increase in excess heat. In contrast, PT was found to be the weather element that best represents excess mortality due to heat stress, and is thus expected to serve as a more reliable forecast index of human biometeorology.

• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.281-288
• /
• 1997

유전율이 높고 온도안정성이 우수하다고 알려져 있는 40Pb(Mg1/3Nb2/3)O3-30PbTiO3-30Pb(Mg1/2W1/2)O3계 세라믹스에 소결온도를 낮추기 위하여 저온에서 액상을 형성하는 91PbO-9WO3를 과잉첨가하여 소결성, 미세구조 및 유전성의 변화에 대하여 조사하였다. 91PbO-9WO3의 첨가량이 증가함에 따라 소결온도가 저하하였으며 6 mol%첨가시는 875$^{\circ}C$에서 소결이 가능하였다. 유전율은 기본조성에서 16,400이었고, 첨가제가 1 mol% 과잉첨가된 경우 18,500으로 최대값을 나타냈으며 이후 첨가량이 증가함에 따라 감소하였다. 첨가제의 첨가량이 2~4mol%인 시편의 온도에 따른 유전율 변화곡선에서 double peak maxima가 나타났으나, 첨가량이 5 mol% 이상인 시편에서는 입계에 텅스텐을 많이 포함하고 있는 결정상이 생성되었고 double peak maxima는 나타나지 않았다.

• 대한기계학회논문집
• /
• 제19권12호
• /
• pp.3372-3381
• /
• 1995

An equilibrium analysis was carried out to determine principal species of heavy metals in waste incineration and their behaviors with variation of temperature, chlorine concentration, excess air ratio, and C/H ratio. The waste was assumed as a compound of hydrocarbon fuel, chlorine, and metals. Calculated results showed that the most important parameter to determine the principal species was temperature. Chlorine concentration also affected on mole fractions of the principal species. Generally principal species at high temperature were chlorides while there were some metals of which principal species were oxides. At low temperature mole fractions of the principal species increased, but at high temperature mole fractions of some metal species decreased. C/H ratio of the hydrocarbon fuel and excess air ratio had little effect on mole fractions of the metal species, compared to the temperature and chlorine concentration.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.620-628
• /
• 2008

Cadmium sulphide (CdS) thin film, which is used as a window layer of heterojunction solar cell, on the glass substrate was deposited by vacuum evaporation. Effects of deposition conditions such as the source and substrate temperature on electrical and optical properties of CdS films was investigated. As the source temperature was increased, the deposition rate of CdS films was increased. In addition, the optical transmittance and the electrical resistivity of CdS films were decreased as the source temperature was increased. This results were attributed to the increase of excess Cd amount in the film. The crystal structure of CdS films exhibited the hexagonal phase with preferential orientation of the (002) plane. As the substrate temperature was increased, the crystal structure of CdS films was improved and the resistivity of the films was increased due to the decrease of excess Cd in film.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.34-42
• /
• 2001

The influences of substrate temperature were studied when fabricating KLN thin film on amorphous substrate using an rf-magnetron sputtering method. Investigating the vaporization temperature of the each element, the excess ratio of target and the optimum deposition conditions were effectively selected when thin filmizing a material which have elements with large difference fo vaporization temperature. In order to compensate K and Li which have lower vaporization temperatures than Nb, KLN target of composition excess with K of 60% and Li of 30% was used. KLN thin film fabricated on Corning 1737 glass substrate had single KLN phase above 58$0^{\circ}C$ of substrate temperature and crystallized to c-axis direction. The optimum conditions were rf power of 100W, process pressure of 150mTorr, and substrate temperature of $600^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.132-138
• /
• 2000

Excess enthalpies ($H^{E}$) were measured by isothermal flow calorimetry for the nonionic amphiphile 2-butoxyethanol/water mixtures at 10 different temperatures (48.5 to $70^{\circ}C$) around and above the lower consolute solution temperature, $T_{lc}$. $H^{E}$ exhibits U-shape for the binary mixtures, and is large and negative which reflects substantial interaction between two chemical species. When the commonly used, semi-empirical Redlich-Kister (RK) polynomials were fitted to the measured $H^{E}$, plots of $H^{E}$ vs. weight fraction provided more accurate fitting with fewer parameters than conventionally drawn $H^{E}$ vs. mole fraction plots. This was due to the enhanced symmetry of $H^{E}$ vs. weight fraction plots. Using the fitted Redlich-Kister polynomials and the Gibbs-Helmholtz relation, temperature dependence of the activity coefficients were found and compared to the values determined from vapor-liquid equilibria. The activity coefficients were in the range of one to three, indicating that the binary system deviates from ideality but not substantially. They slightly depended on temperature and the temperature effect was equivalent to 10 % change in the activity coefficients.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1092-1100
• /
• 2005

We investigated a carbon nanotube (CNT) oscillator controlled by the thermal gas expansion using classical molecular dynamics simulations. When the temperature rapidly increased, the force on the CNT oscillator induced by the thermal gas expansion rapidly increased and pushed out the CNT oscillator. As the CNT oscillator extruded from the outer nanotube, the suction force on the CNT oscillator increased by the excess van der Waals(vdW) energy. When the CNT oscillator reached at the maximum extrusion point, the CNT oscillator was encapsulated into the outer nanotube by the suction force. Therefore, the CNT oscillator could be oscillated by both the gas expansion and the excess vdW interaction. As the temperature increased, the amplitude of the CNT oscillator increased. At the high temperatures, the CNT oscillator escaped from the outer nanotube, because the force on the CNT oscillator due to the thermal gas expansion was higher than the suction force due to the excess vdW energy. By the appropriate temperature controls, such as the maximum temperature, the heating rate, and the cooling rate, the CNT oscillator could be operated.