• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.06a
• /
• pp.94-95
• /
• 1996

• Preventive Nutrition and Food Science
• /
• v.15 no.3
• /
• pp.189-195
• /
• 2010

Water extracts from 20 medicinal plants, traditionally used for postmenopausal symptoms in Korea, were examined for their vasorelaxant activity in isolated rat thoracic aorta rings precontracted with norepinephrine (NE). Among the 20 medicinal plants, Cornus officinalis (CoEx, 0.3 mg/mL), Schisandra chinensis (ScEx, 0.3 mg/mL), Erythrina variegate (EvEx, 0.3 mg/mL), and Epimedium koreanum (EkEx, 0.3 mg/mL) showed rapid relaxation of endothelium-intact aorta ($69\pm4%$, $40\pm3%$, $25\pm2%$, and $23\pm3%$ of active tone induced by NE, respectively). In contrast, the extracts of Erythrina variegata (EvEx), Angelica gigas (AgEx), Pueraria thunbergiana (PtEx), and EkEx lead to gradual (i.e., long-term) relaxation to baseline in endothelium-intact vessels. The time to complete relaxation was 20～40 min. These 6 plant extracts were selected for the investigation of possible underlying mechanisms. The CoEx-, ScEx-, or EkEx-induced rapid relaxations were virtually abolished by endothelium denudation, and were significantly inhibited by pretreatment with nitric oxide (NO) synthase inhibitor $N^G$-nitro-L-arginine (L-NNA, 10 ${\mu}M$), indicating that increased formation of NO might contribute to the endothelium-mediated relaxation. In long-term responses, the endothelium denudation did not affect PtEx-induced relaxation, whereas it delayed responses by EvEx and AgEx, and significantly inhibited the effect of EkEx. Among EvEx, AgEx, and PtEx, EvEx attenuated the $CaCl_2$-induced vasoconstriction in high-potassium depolarized medium, implying that EvEx is involved in inhibition of the extracellular calcium influx to smooth muscle through voltage dependent calcium channels. These results provide the scientific rationale for the interrelationships between the use of 20 medicinal plants and their effects on cardiovascular health in estrogen deficient conditions.

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.187-192
• /
• 2003

The magnetic and thermal properties of NiFe/[IrMn-Mn]/CoFe with Mn additions have been studied. As-deposited CoFe pinned layers with [IrMn-Mn]layer had dominantly larger exchange biasing field ( $H_{ex}$) and blocking temperature ( $T_{b}$) than those with pure I $r_{22}$M $n_{78}$ used. The $H_{ex}$ and $T_{b}$ improved with 76.8-78.1 vol% Mn, but those of the NiFe/IrMn/CoFe dropped considerably with more addition of 0.6 vol % Mn. The average x-ray diffraction peak ratios of fcc [(111)CoFe, NiFe]/(111)IrM $n_3$ textures for the Mn inserted total vol of 75.5, 77.5, and 79.3% were about 1.4, 0.8, and 0.6, respectively. For the sample without Mn inserted layer, the $H_{ex}$ between IrMn and CoFe layers was almost zero, but it increased to 100 Oe after annealing of 250 $^{\circ}C$. For as-grown two multilayers samples with ultra-thin Mn layers of 77.5 and 78.7 vol %, the $H_{ex}$s were 259 and 150 Oe, respectively. In case of IrMn with 77.5 vol% Mn, the $H_{ex}$ was increased up to 475 Oe at 350 $^{\circ}C$ but decreased to 200 Oe at 450 $^{\circ}C$, respectively. The magnetic properties and thermal stabilities of NiFe/[IrMn-Mn]/CoFe multilayer were enhanced with Mn additions. In applications where higher $H_{ex}$ and $T_{b}$ are required, proper contents of Mn can be used. be used. used.

• Journal of Hydrogen and New Energy
• /
• v.35 no.2
• /
• pp.140-145
• /
• 2024

High temperature co-electrolysis of H₂O-CO₂ mixtures using solid oxide cells has attracted attention as promising CO₂ utilization technology for production of syngas (H₂/CO), feedstock for E-fuel synthesis. For direct supply to E-fuel production such as hydrocarbon and methanol, the outlet gas ratio (H₂/CO/CO₂) of co-electrolysis should be controlled. In this work, current voltage characteristic test and product gas analysis were carried out under various reaction conditions which could attain proper syngas ratio.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.64-67
• /
• 2002

IrMn pinned spin valve (SV) films with stacks of Ta/NiFe/IrMn/CoFe/Cu/CoFe/NiFe/Ta were prepared by dc sputtering onto thermally oxidized Si (111) substrates at room temperature under a magnetic field of about 100 Oe. The annealing cycle number and temperature dependence of exchange coupling field (H$_{ex}$), magnetoresistance (MR) ratio, and coercivity (H$_{c}$) were investigated. By optimizing the process of deposition and post thermal annealing condition, we obtained the IrMn based SV films with MR ratio of 3.6%, H$_{ex}$ of 1180 Oe for the pinned layer. The H$_{ex}$ is stabilized after the second annealing cycle and it is thought that this SV reveals high thermal stability. The H$_{ex}$ maintained its strength of 600 Oe in operation up to 24$0^{\circ}C$ and decreased monotonically to zero at 27$0^{\circ}C$.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.211-221
• /
• 2002

The purpose of this study was to analyze the commercial paste opaque products currently available in domestic of foreign as well as domestic, such as Duceram Plus(DU; Ducera Dental GmbH, Germany), VMK 95(VM; Vita Co., Germany), Noritake EX-3(EX; Noritake Co., Japan) and Ceramax(CE; Alphadent Co., Korea). They were characterized in thermal expansion coefficient, particle size distribution, viscosity and solvent using thermomechanical analyzer, particle size analyzer, rheometer and infrared spectrophotometer. Experimental results are as follows; Firstly, thermal expansion coefficients were determined $13.9{\times}10-6/^{\circ}C$ for DU, $14.3{\times}10-6/^{\circ}C$ for VM, $13.3{\times}10-6/^{\circ}C$ for EX, and $14.0{\times}10-6/^{\circ}C$ for CE. Secondly, percent of partice size below $1{\mu}m$ were 12% for DU, VM and CE, and 13% for EX, percent between $1{\mu}m$ and $5{\mu}m$ were 42% for DU, 42% for VM, 38% for EX, and 61 % for CE, percent between $5{\mu}m$ and $10{\mu}m$ were 21 % for DU, 24% for VM, 20% for EX, and 18% for CE, and over $10{\mu}m$ were 25% for DU, 22% for VM, 29% for EX, 9% for CE. Thirdly, the basic composition of the solvent in all of the commercial paste opaques were determined as ethylene glycol from FT-IR investigation. Lastly, measured viscosities were 1798 cp for DU, 536 cp for VM, 1110 cp for EX, and 721 cp for CE.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.130-131
• /
• 2003

The magnetic and thermal properties of NiFe/IrMn/CoFe with Mn additions have been studied. As grown CoFe pinned-layers with IrMn-Mn have dominantly larger exchange biasing field( $H_{ex}$) and blocking temperature( $T_{b}$) than when pure I $r_{22}$M $n_{78}$ is used. The magnetic properties improve, $H_{ex}$ and $T_{b}$ improve with 77-78 vol% Mn, but drop considerably with more Mn additions, losing magnetic properties of theb NiFe/IrMn/CoFe with addition 0.6 vol % Mn. The average x-ray diffraction peak ratios fcc (111)CoFe of (111)IrM $n_3$ textures for the Mn inserted total vol of 75, 77, and 79 vol% were about 1.4, 0.8, and 0.6, respectively. For the sample without Mn inserted layer, the $H_{ex}$ between I $r_{22}$M $n_{78}$ and CoFe layers is almost nothing. For two multilayer as-grown samples with ultra-thin Mn layers of 77 vol % and 79 vol %, the $H_{ex}$s are 250 Oe and 150 Oe, respectively. In case of IrMn with 77.5 vol% Mn, the $H_{ex}$ was 444 Oe up to 30$0^{\circ}C$ endured of 363 Oe at 40$0^{\circ}C$, respectively. Mn additions improve the magnetic properties and thermal stabilities of NiFe/IrMn/CoFe. Those increase the $H_{ex}$ and $T_{b}$. In applications where higher $H_{ex}$ and $T_{b}$ are accept, proper concentrations of Mn can be used.n can be used.be used.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.36-41
• /
• 2000

We studied the exchange anisotropy of Ni-Fe/Co-Fe/Mn-Ir/Cu/buffer/Si multilayers using D.C magnetron sputtering technique. Generally, Ni-Fe/Mn-Ir/buffer(Cu)/Si multilayers cannot pin the ferromagnetic layer for the lower exchange biased field. We got $H_{ex}$ ex/ increased by two times, after using Cu/Ta as buffer layer to get larger grain size of Mn-Ir layer and inserting very thin Co-Fe layer between the Ni-Fe layer and the Mn-Ir layer to get improved grain-to-grain epitaxy relation at the interface between Ni-Fe layer and Mn-Ir layer. The variation of $H_{ex}$ by thickness of Mn-Ir layer in ferromagnete/Mn-Ir/buffer/Si multilayers is different to that in Mn-Ir/ferromagnete/buffer/Si multilayers, because the volume distribution of grain size of Mn-Ir layer and the exchange energy at the interface between the Mn-Ir and the ferromagnetic layers is different for stacking sequence.

• Journal of Hydrogen and New Energy
• /
• v.35 no.2
• /
• pp.162-167
• /
• 2024

Fossil fuels have been main energy source to people. However, enormous amount of CO₂ was emitted over the world , resulting in global climate crisis today. Recently, solid oxide electrolyzer cell (SOEC) is getting attention as an effective way for producing H₂, a clean energy resource for the future. Also, SOEC could be applicable to reverse water-gas shift reaction process due to its high-temperature operating condition. Here, SOEC system was utilized for both H₂ production and CO₂ reduction process, allowing product gas composition change by controlling operating conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.249-251
• /
• 2011

International energy agency(IEA) consisted of OECD countries deals with international energy problems. IEA/Wind ExCo is an execution committee under IEA for the implementing agreement for co-operation in the research, development and deployment of wind energy systems. Currently 22 countries participate the committee and 11 research tasks are in progress. 11 tasks are base technology information exchange, wind energy in cold climates, offshore wind energy technology deployment, integration of wind and hydropower systems, power systems with large amounts of wind power, cost of wind energy, labelling small wind turbines, social acceptance of wind energy projects, MexNext aerodynamics and comparison of dynamic computer codes and models, offshore wind energy and wakebench. At the presentation, activities of major wind energy countries and IEA/Wind ExCo and research tasks are introduced.