• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.189-190
• /
• 2003

A New kinetic scheme for the compressible Navier-Stokes equations is developed. While the conventional approach, such as KFVS scheme, employs the splitting algorithm and computes the numerical flux on the basis of the collisionless equation, the present approach employs the splitting algorithm in the evaluation of the numerical flux, where the collision effect is explicitly taken into account. However, the initial condition employed in the computation is slightly different from the conventional Chapman-Enskog NS distribution function. The present study also reveals the background of the existing kinetic schemes. such as the KFVS scheme and Gas-Kinetic BGK scheme.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.387-393
• /
• 2016

Threshold voltage shift has been observed from many thin-film transistors (TFTs) and the time evolution of the shift can be modeled as the stretched-exponential and -hyperbola function. These analytic models are derived from the kinetic equation for defect-creation or charge-trapping and the equation consists of only reversible reactions. In reality TFT's a shift is permanent due to an irreversible reaction and, as a result, it is reasonable to consider that both reversible and irreversible reactions exist in a TFT. In this paper the case when both reactions exist in parallel and make a combined threshold voltage shift is modeled and simulated. The results show that a combined threshold voltage shift observed from a TFT may agrees with the analytic models and, thus, the analytic models don't guarantee whether the cause of the shift is defection-creation or charge-trapping.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.566-574
• /
• 2021

The process of cavitation involves generation, growth, coalescence, and collapse of small bubbles and is tremendously influenced by bubble-bubble interactions. To understand these interactions, a new cavitation model based on the transport equation is proposed herein. The modified Rayleigh-Plesset equation is analyzed to determine the bubble growth rate by assuming equal-sized spherical bubble clouds. The source term in the transport equation is then derived according to the bubble growth rate with the bubble-bubble interaction. The proposed model is validated by various test simulations, including microscopic bubble cloud evolution as well as macroscopical two- and three-dimensional cavitating flows. Compared with previous models, namely the Kunz and Zwart cavitation models, the newly proposed model does not require adjustable parameters and generally results in better predictions both microscopic and macroscopical cases. This model is more physical.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.53-59
• /
• 1991

본 논문에서는 포텐셜유동이란 가정하에 정현변조하는 비선형 입사파가 쐐기에 의하여 산란하는 문제를 마하반사의 관점에서 다척도전개기법을 이용하여 해석하였다. 산란파의 진폭전개는 선형항을 포함한 3차 $Schr\ddot{o}dinger$ 방정식으로 기술할 수 있음을 밝혔다. 즉, 비선형성을 나타내는 3차항과 분산성을 표시하는 선형항이 진폭전개의 복원력으로 작용함을 규명하였다. 패기의 반각이 17.55$^{\circ}$와 24.09$^{\circ}$인 2가지 모형에 대하여 입사각의 기울기와 변조비를 바꾸어 가며 계산을 수행하였다. 수치계산에서 얻어진 stem파의 진폭비와 폭은 실험에서 관측된 현상을 잘 반영하고 있으나, stem파는 입사파의 기울기가 매우 큰 경우에만 나타났다. 또한 분산성의 영향은 매우 미약하여 정현변조의 경우에는 비선형성이 지배적이란 결론에 도달하였다.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.439-451
• /
• 2018

The stress path characteristics of surrounding rock in the formation of gob were analysed and the unloading was solved. Taking Chengchao Iron Mine as the engineering background, the model for analysing the instability of deep gob was established based on the mechanism of stress relief in deep mining. The energy evolution law was investigated by introducing the local energy release rate index (LERR), and the energy criterion of instability of surrounding rock was established based on the cusp catastrophe theory. The results showed that the evolution equation of the local energy release energy of the surrounding rock was quartic function with one unknown and the release rate increased gradually during the mining. The calculation results showed that the gob was stable. The LERR per unit volume of the bottom structure was relatively smaller, which mean the stability was better. The LERR distribution showed that there was main energy release in the horizontal direction and energy concentration in the vertical direction which meet the characteristics of deep mining. In summary, this model could effectively calculate the stability of surrounding rock in the formation of gob. The LERR could reflect the dynamic process of energy release, transfer and dissipation which provided an important reference for the study of the stability of deep mined out area.

• 한국통신학회논문지
• /
• 제37A권11호
• /
• pp.961-971
• /
• 2012

This article is concerned with effective numerical techniques for partial differential equation (PDE)-based image restoration. Numerical realizations of most PDE-based denoising models show a common drawback: loss of fine structures. In order to overcome the drawback, the article introduces a new time-stepping procedure, called the method of nonflat time evolution (MONTE), in which the timestep size is determined based on local image characteristics such as the curvature or the diffusion magnitude. The MONTE provides PDE-based restoration models with an effective mechanism for the equalization of the net diffusion over a wide range of image frequency components. It can be easily applied to diverse evolutionary PDE-based restoration models and their spatial and temporal discretizations. It has been numerically verified that the MONTE results in a significant reduction in numerical dissipation and preserves fine structures such as edges and textures satisfactorily, while it removes the noise with an improved efficiency. Various numerical results are shown to confirm the claim.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.219-225
• /
• 2011

Silicone resin is recently used as encapsulant for high-power LED module due to its excellent thermal and optical properties. In the present investigation, finite element analysis of cure process was attempted to examine residual stress evolution behavior during silicone resin cure process which is composed of chemical curing and post-cooling. To model chemical curing of silicone, a cure kinetics equation was evaluated based on the measurement by differential scanning calorimeter. The evolutions of elastic modulus and chemical shrinkage during cure process were assumed as a function of the degree of cure to examine their effect on residual stress evolution. Finite element predictions showed how residual stress in cured silicone resin can be affected by elastic modulus and chemical shrinkage behavior. Finite element analysis is supposed to be utilized to select appropriate silicone resin or to design optimum cure process which brings about a minimum residual stress in encapsulant silicone resin.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.190-194
• /
• 2007

The forging process design and microstructure evolution for gas turbine disk of a Waspaloy is investigated in this study. Parameters related to deformation are die and preform geometry, and forging temperature of die and workpiece. Die and preform design are considered to reduce the forging load, and to avoid the forging defects. Blocker and finisher dies for multistage forging are designed and the initial billet geometry is determined. The control of hot forging parameters such as strain, strain rate and temperature also is important because the microstructure change in hot working affects the mechanical properties. The dynamic recrystallization evolution has been studied in the temperature range 900-$1200^{\circ}C$ and strain rate range 0.01-1.0s-1 using hot compression tests. Modeling equations are required represent the flow curve, recrystallized grain size, recrystallized volume fraction by various tests. In this study, we used to thermo-viscoplastic finite element modeling equation of DEFORM-2D to predict the microstructure change evolution during thermo-mechanical processing. The microstructure is updated during the entire thermal and deformation processes in forging.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.77-81
• /
• 2003

SDM (Structural Dynamics Modification) is a tool to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary (modifying) structures. In this paper, the goal of the optimal SDM is set to maximize the natural frequency of a base plate structure by attaching serially-connected beam stiffeners. The design variables are chosen as positions of the attaching beam stiffeners, where the number of stiffeners is considered as a design space. The problem of non-matching interface nodes between the base plate and beam stiffeners is solved by using localized Lagrange multipliers, which act to glue the two structures with non-matching interface nodes. As fer the cases of non-matching interface nodes problem, the governing equation of motion of a structure can be considered from the viewpoint of a topological modification, which involves the change of the number of structural members and DOFs. Consequently, the eigenpairs of the beam-stiffened plate structure are obtained by using an eigen reanalysis technique of topological modifications. Evolution Strategies (ES), which is a probabilistic population-based optimization technique that mimics the principles from biological evolution in nature, is utilized as a mean for the optimization.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권10호
• /
• pp.19-28
• /
• 2021

The present study aims to evolve the value cycle of e-business through value co-creation during the Coronavirus pandemic. The population of the study is experts consisting of university professors in the fields of marketing management, e-commerce, and managers of organizations and companies in Iran. Using the snowball sampling method, 50 of them were selected as the sample. This study employs the factor analysis method and structural equation modeling (SEM) approach for identification of the factors. The findings of this study reveal that 10 factors affect the evolution of the value chain into the value cycle, including customer relationship management, e-literacy, value co-creation, e-readiness, and integrated value creation, the logic of service dominance, shared value creation, virtual culture, e-trust, and network economics. Despite the difficulties that COVID-19 has created for businesses worldwide, the evolution of the e-business value cycle through value co-creation in the Coronavirus pandemic can be considered as a positive aspect of the pandemic. In fact, with more pandemics and more customers turning to e-businesses due to the co-creation of customer value, e-businesses can cover their weaknesses and improve their strengths by engaging customers and receiving their feedback, thus transforming their value chain into the value cycle.