• 한국해안해양공학회지
• /
• 제3권1호
• /
• pp.45-53
• /
• 1991

본 논문에서는 변조된 입사파의 쐐기에 의한 비선형 산란을 해석하였다. 쐐기의 목이 작다고 가정하여 포물형 근사를 도입하여 문제를 단순화시켰다. 이 문제에는 척도가 서로 다른 시간 및 공간 변수가 포함되어 있으므로 다척도 전개기법을 이용하였다. 비선형 산란파의 전개식은 일종의 3차 Schrodinger 방정식으로 기술할 수 있음을 밝혔는 데, 이 식에는 군속도로 진행하는 선형시간전개항, 선형측면분산항 그리고 3차 비선형항이 포함되어 있다. 유한차분법을 사용하여 수행 한 수치 계산의 결과에 의하면 산란파는 비선형항이 클 수록 그리고 변조비가 작을 수록 불안정해지며, 초기에 형성되는 스템파는 곧 여러 개의 파성분으로 분리되어 시간에 따라 변동한다. 전반적으로 보아 산란파의 전개에는 비선형항이 지배적인 인자라는 결론을 내릴 수 있다.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.39-44
• /
• 2013

LTE(Long Term Evolution)-Advanced에서는 저전력 피코셀(picocell)과 같은 소형셀을 중첩하여 배치해 시스템 성능을 향상시키기 위한 HetNet(Heterogeneous Network)에 대한 연구가 활발히 진행되고 있다. 또한 HetNet에서 데이터 오프로딩 효과를 증대시키기 위해 셀 영역 확장(CRE: Cell Range Expansion) 기술이 소개되었다. 본 논문에서는 최적의 오프로딩 효과를 위해 SINR(Signal to Interference plus Noise Ratio) 기반 셀 선택 기법을 제안한다. 셀 확장 영역에 존재하는 사용자의 간섭 관리를 위해 ABS를 사용하며, 스펙스럼 효율을 증가시키기 위하여 동적인 ABS 비율을 사용한다. 모의실험 결과, 제안한 기법에서 피코셀뿐만 아니라 매크로셀 사용자의 스펙트럼 효율이 향상되어 전체적인 사용자의 성능이 향상 된 것을 볼 수 있다.

• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.265-281
• /
• 2022

A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

• 소성∙가공
• /
• 제12권3호
• /
• pp.244-250
• /
• 2003

Sheets of aluminum alloy 1100 were asymmetrically cold rolled in a rolling mill with different roll speeds. In order to promote the shear deformation during asymmetrical rolling, cold rolling without lubrication was performed with a roll speed ratio of 1.5/l.0. The evolution of texture components during asymmetrical rolling was investigated by the calculation of the orientation distribution function (ODF) using the monoclinic sample symmetry. The strain state during asymmetrical rolling was tackled by means of FEM calculations. Asymmetrical rolling gave rise to the development of pronounced strain gradients throughout the thickness layers which resulted in the formation of strong texture gradients in the aluminum sheet.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.752-757
• /
• 2001

To reduce stress concentration around the intersection between a spherical pressure vessel and a cylindrical nozzle under various load conditions using less material, the optimization for the distribution of reinforcement has researched. The ranked bidirectional evolutionary structural optimization(R-BESO) method is developed recently, which adds elements based on a rank, and the performance indicator which can estimate a fully stressed model. The R-BESO method can obtain the optimum design using less iteration number than iteration number of the BESO. In this paper, the optimized intersection shape is sought using R-BESO method for a flush and a protruding nozzle. The considered load cases are a radial compression, torque and shear force.

• 한국주조공학회지
• /
• 제20권3호
• /
• pp.197-207
• /
• 2000

Al-Si alloys were solidified in a rotating cylindrical mold by a vertical centrifugal casting process. Under a certain casting condition, there are four distinct zones such as the chill zone, the primary fine columnar zone, the equiaxed zone, and the secondary coarse columnar zone from the mold wall. The columnar-equiaxed transition (CET) and the equiaxed-columnar transition (ECT) were measured as functions of solute content, flow rate (mold velocity), pouring temperature and mold temperature. Within the critical value of solute content, as the flow rate increases, the columnar-equiaxed transition were found, but not the equiaxed-columnar transition. The aspect ratio of the primary columnar zone was more affected by the solute content than the flow rate. However the aspect ratio of the equiaxed zone was more affected by the flow rate than the solute content. The aspect ratio of the secondary columnar zone was affected by both the flow rate and the solute content.

• Journal of Microbiology
• /
• 제45권1호
• /
• pp.75-78
• /
• 2007

Nucleotide and amino acid substitution pattern in vif gene of the Korean clade of HIV-1 isolated from Koreans were analyzed using consensus sequences. At nucleotide level, transition/transversion substitution ratio was 1.88, and nonsynonymous/synonymous substitution ratio was 2.67, suggesting a divergent evolution in the Korean clade. At amino acid level, there were 17 substitutions and $G{\rightarrow}E$ substitution at position 37 may be responsible for change in predicted secondary structure.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1444-1451
• /
• 2001

The evolutionary structural optimization(ESO) method has been under continuous development since 1992. The bidirectional evolutionary structural optimization(BESO) method is made of additive and removal procedure. The BESO method is very useful to search the global optimum and to reduce the computational time. This paper presents the ranked bidirectional evolutionary structural optimization(R-BESO) method which adds elements based on a rank, and the performance indicator which can estimate a fully stressed model. The R-BESO method can obtain the optimum design using less iteration number than iteration number of the BESO.

• ETRI Journal
• /
• 제37권5호
• /
• pp.845-855
• /
• 2015

To enable the coexistence of Licensed Assisted Access (LAA) and Wi-Fi in 5 GHz unlicensed bands, a new channel access mechanism is proposed. Accounting for the fairness between LAA and Wi-Fi, the proposed mechanism finds the optimal transmission time ratio by adaptively adjusting the transmission durations for LAA and Wi-Fi. In addition, we propose a new analytical model for the distributed coordination function of IEEE 802.11 through some modifications of conventional analytical models for saturation and non-saturation loads. By computing the activity ratio of Wi-Fi, the proposed analytical model is able to control the time ratio between LAA and Wi-Fi, which is required for practical implementation of the proposed access mechanism. Through numerical simulations, the proposed channel access mechanism is compared with conventional methods in terms of throughput and utility.

• ETRI Journal
• /
• 제45권1호
• /
• pp.150-162
• /
• 2023

The polar delta-sigma modulator (DSM) transmitter architecture exhibits good coding efficiency and can be used for software-defined radio applications. However, the necessity of high clock speed is one of the major drawbacks of using this transmitter architecture. This study proposes a low-complexity timeinterleaved architecture for the polar DSM transmitter baseband part to reduce the clock speed requirement of the polar DSM transmitter using an upsampling technique. Simulations show that using the proposed four-branch timeinterleaved polar DSM transmitter baseband part, the clock speed requirement of the transmitter is reduced by four times without degrading the signal-tonoise-and-distortion ratio.