Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Deformation Texture in Aluminum Sheets during Asymmetrical Rolling with a Roll Speed Ratio of 1.5/l.0

롤속도 비 1.5/l.0 비대칭 압연 시 알루미늄 판재에서 변형집합조직의 형성

  • 지영규 (고려대학교 대학원 신소재공학과) ;
  • 정효태 (강릉대학교 금속공학과) ;
  • 허무영 (고려대학교 재료공학부)
  • Published : 2003.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Sheets of aluminum alloy 1100 were asymmetrically cold rolled in a rolling mill with different roll speeds. In order to promote the shear deformation during asymmetrical rolling, cold rolling without lubrication was performed with a roll speed ratio of 1.5/l.0. The evolution of texture components during asymmetrical rolling was investigated by the calculation of the orientation distribution function (ODF) using the monoclinic sample symmetry. The strain state during asymmetrical rolling was tackled by means of FEM calculations. Asymmetrical rolling gave rise to the development of pronounced strain gradients throughout the thickness layers which resulted in the formation of strong texture gradients in the aluminum sheet.

Keywords

References

  1. 한국소성가공학회지 v.11 허무영
  2. Metall. Mater. Trans. A v.31A O.Engler;M.Y.Huh;C.N.Tome
  3. Met. & Mater. Int. v.5 M.Y.Huh;H.C.Kim;J.J.Park;O.Engler https://doi.org/10.1007/BF03026156
  4. Mater. Sci. Forum v.217-222 M.Y.Huh;J.H.Kim;K.Y.Ha;S.Lee https://doi.org/10.4028/www.scientific.net/MSF.217-222.571
  5. Metall. Mater. Trans. A v.A25 S.I.Wright;G.T.Gray Ⅲ;A.D.Rollett
  6. Mater. Sci. Forum v.273-275 A. Van Bael;E.Hoferlin;L.Kestens;P.Van Houtte https://doi.org/10.4028/www.scientific.net/MSF.273-275.417
  7. Mater. Sci. Eng. v.A308 no.1-2 M.Y.Huh;O.Engler
  8. Acta mater. v.49 K.H.Kim;D.N.Lee https://doi.org/10.1016/S1359-6454(01)00036-2
  9. Int. J. Mech. Sci. v.43 S.H.Lee;D.N.Lee https://doi.org/10.1016/S0020-7403(01)00025-X
  10. J. Mater. Proc. Tech. v.60 H.Hyja;J.Markowski;D.Stoinski https://doi.org/10.1016/0924-0136(96)02310-2
  11. Int. J. Mech. Sci. v.44 M.Salimi;F.Sassani https://doi.org/10.1016/S0020-7403(02)00043-7
  12. J. Mater. Proc. Tech. v.134 C.W.Knight;S.J.Hardy;A.W.Lees;K.J.Brown https://doi.org/10.1016/S0924-0136(02)00469-7
  13. Int. J. Mech. Sci. v.44 J.S.Lu;O.K.Harrer;W.Schwenzfeier;F.D.Fischer
  14. J. Mater. Proc. Tech. v.124 H.Gao;S.C.Ramalingam;G.C.Barber;G.Chen https://doi.org/10.1016/S0924-0136(02)00131-0
  15. Int. J. Mech. Sci. v.39 A. Bettina Richelsen https://doi.org/10.1016/S0020-7403(97)00013-1
  16. Mat. Sci. Eng. v.34 H.O.Asbeck;H.Mecking https://doi.org/10.1016/0025-5416(78)90041-1
  17. DEFORM-2D(Ver. 7.1) Science Forming Technologies Cooperation
  18. Texture Analysis in Materials Science H.J.Bunge
  19. Mater. Sci. Eng. v.A247 M.Y.Huh;Y.S.Cho;O.Engler
  20. Met. & Mater. v.4 Y.S.Cho;H.C.Kim;M.Y.Huh
  21. Metall. Trans. v.1 U.F.Kocks https://doi.org/10.1007/BF02900224
  22. Metall. Trans. A v.22A C.S.Lee;B.J.Duggan
  23. Metals and Mater. Int. v.2 M.Y.Huh;J.C.Park;S.Lee https://doi.org/10.1007/BF03026088