• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.274-282
• /
• 2012

In this paper, we propose the design of lighting control algorithm for intelligent LED lighting system. The proposed lighting control algorithm transmitted to MCU through a data bus the environmental information detected from respectively sensor node. The MCU control software was designed to determine the level maintained to depending on the set control method by comparing the results that calculated the dimming level using a signal value. Also, it was designed to be lighting by cross-performed periodically the rotation and reverse method by created fully symmetrical pattern using the control algorithm to LED lighting device. In this paper, the proposed lighting control algorithm improved the reliability of the data sent by designed the system that can be controlled lighting to stable, and it was maintained the event delivery ratio of 91%. Also, the lighting device was decreased the luminous intensity of 32%, the power consumption of 49%, and heat generation of 32%. As a result, it were could be improved the energy efficiency that the life-cycle of LED has been increased 50%.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.209-216
• /
• 2009

In the wireless sensor network, flooding is required for the dissemination of queries and event announcements. The simple flooding causes the implosion and the overlap problems, so the simple flooding may result in the reduced network lifetime. Therefore, in this paper, we propose the flooding overlay structure (FOS) so that the overhead caused by flooding can be reduced. We propose two variants of FOS mechanisms, the centralized FOS (CFOS) and the distributed FOS (DFOS). In CFOS, the sink collects the network topology information and selects forwarding nodes based on that information. On the other hand, DFOS allows each sensor node to decide whether to act as a forwarding node or not based on its local information. For the performance evaluation of our proposed mechanisms, we carry out NS-2 based simulations and compare ours with the simple flooding and the gossiping. The simulation results indicate that the proposed FOS mechanisms outperform the simple flooding in terms of the network lifetime and the gossiping in terms of the data delivery ratio.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.384-389
• /
• 2005

The objective on this project is to develop a cooperative Field Robot (FR), by using a customize Open Control Platform (OCP) as design and development process. An OCP is a CORBA-based solution for networked control system, which facilitates the transitioning of control designs to embedded targets. In order to achieve the cooperation surveillance system, two FRs are distributed by navigation messages (GPS and sensor data) using CORBA event-channel communication, while graphical information from IR night vision camera is distributed using CORBA Asynchronous Method Invocation (AMI). The QoS features of AMI in the network are to provide the additional delivery method for distributing an IR camera Images will be evaluate in this experiment. In this paper also presents an empirical performance evaluation from the variable chunk sizes were compared with the number of clients and message latency, some of the measurement data's are summarized in the following paragraph. In the AMI buffers size measurement, when the chuck sizes were change, the message latency is significantly change according to it frame size. The smaller frame size between 256 bytes to 512 bytes is more efficient fur the message size below 2Mbytes, but it average performance in the large of message size a bigger frame size is more efficient. For the several destination, the same experiment using 512 bytes to 2 Mbytes frame with 2 to 5 destinations are presented. For the message size bigger than 2Mbytes, the AMI are still able to meet requirement far more than 5 clients simultaneously.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.1
• /
• pp.1-14
• /
• 2023

This study was conducted to explore the change in the market issues on HMR (Home Meal Replacements) using local foods after the COVID-19 outbreak. Online text data were collected from internet news, social media posts, and web documents before (from January 2016 to December 2019) and after (from January 2020 to November 2022) the COVID-19 outbreak. TF-IDF analysis showed that 'Trend', 'Market', 'Consumption', and 'Food service industry' were the major keywords before the COVID-19 outbreak, whereas 'Wanju-gun', 'Distribution', 'Development', and 'Meal-kit' were main keywords after the COVID-19 outbreak. The results of topic modeling analysis and categorization showed that after the COVID-19 outbreak, the 'Market' category included 'Non-face-to-face market' instead of 'Event,' and 'Delivery' instead of 'Distribution'. In the 'Product' category, 'Marketing' was included instead of 'Trend'. Additionally, in the 'Support' category, 'Start-up' and 'School food service' appeared as new topics after the COVID-19 outbreak. In conclusion, this study showed that meaningful change had occurred in market issues on HMR using local foods after the COVID-19 outbreak. Therefore, governments should take advantage of such market opportunity by implementing policy and programs to promote the development and marketing of HMR using local foods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.94-106
• /
• 2011

The muddy water occurrence possibility of reservoir were analyzed by considering GIS based soil erosion model, sediment delivery ratio and effective reservoir capacity. For the purpose, the weakness factors for the establishment of countermeasures of basin were analyzed by evaluating input factors of RUSLE model based on spatial data such as DEM, soil map, landcover map and so on. The potential of soil erosion was estimated considering highland upland. The sediment yields of Chungju-Dam and Soyanggang-Dam showed the highest result in sediment yield using sediment delivery ratio with considering basin area. The sediment concentration of Imha-Dam and Chungju-Dam showed the highest value as 0.791 $kg/m^3/yr$ and 0.526 $kg/m^3/yr$ respectively in sediment concentration with considering effective reservoir capacity. Especially, sediment yield of Imha-Dam was about 2.36 times lower than Soyanggang-Dam, but the sediment concentration was 1.90 times higher preferably, because the effective reservoir capacity of Imha-Dam was about 4.48 times lower. This study calculated sediment concentration using the 10 years mean rainfall event and could consider the aspects of soil, terrain, landcover, cultivation condition and effective reservoir capacity of each basin effectively through the results. Therefore, these quantitative sediment concentration data could be used to estimate the potential of high density turbid water for reservoir and applied with effective tools for the management of reservoir.

• Anxiety and mood
• /
• v.9 no.2
• /
• pp.147-153
• /
• 2013

Objective : Despite the chronic nature and high social costs, individuals with anxiety disorders seldom seek treatment. Thus, education for public awareness and screening for the illness is tremendously important for mental health professionals. This study summaries and presents the results from Anxiety Disorder Screening Program during the Mental Health Exposition held in Seoul in April, 2013. Methods : We analyzed the data from 116 participants who agreed and completed the screening questionnaires during their visits to two-day Anxiety Disorder Screening Program prepared by the Korean Academy of Anxiety Disorder. The questionnaire comprised of modified Mobility inventory for agoraphobia, Contents of worries, Penn State Worry Questionnaire, Life Events Checklist, and Abbreviated Posttraumatic Stress Disorder Checklist. Results : Participants demonstrated high rates of anxiety symptoms and possible anxiety disorders. Experience of panic attack was reported by 45%, lifetime and 16% in the past month by respondents. Phobia was reported by 46%. Participants had an average of 3.3 pathological worries and among those, social or interpersonal content was most common (46%). At least one lifetime traumatic event was reported by 64%. By the cut-off scores in the literature, 46% had possible generalized anxiety disorder and 58% possible posttraumatic stress disorder. Conclusion : Our results suggested that many visitors to Anxiety Disorder Screening Program were in fact treatment seeking after experiencing some forms of anxiety symptoms. Further efforts for delivery of medical information and increasing public awareness for anxiety disorders are needed.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.665-670
• /
• 2010

Pollutants from urban pavement consists various kinds of substances which are originated from dry deposition, a grind out tire, corrosive action of rain to pavement and facilities and raw materials of the road etc.. These are major pollutants of urban NPS (Non-point source) during rainfall period. However there is not enough information to control such pollutants for appropriate management of natural water quality. In this study of transportation areas, three monitoring stations were set up at trunk road, urban highway and national road in Gyeongnam province. Runoff flow rate was measured at every 15minutes by automatic flow meters installed at the end of storm sewer pipe within the road catchment area for water quality analysis. Data was collected every 15 minutes for initial two hours of rainfall. Additional samples were collected 1-4 hours interval till the end of rainfall. The monitoring parameters were $COD_{Mn}$, SS, T-N & T-P and heavy metals. The average EMCs of TSS and $COD_{Mn}$ were 62.0 mg/L and 24.2 mg/L on the city trunk road, which were higher than those of urban highway and national road, indicating higher pollutant loads due to activities in the city downtown area beside the vehicle. On the other hand, the average EMC of T-N and T-P were in the range of 2.67-3.23 mg/L and 0.19-3.21 mg/L for all the sampling sites. Heavy metals from the roads were mainly Fe, Zn, Cu and Mn, showing variable EMCs by the type of road. From the TSS wash-off analysis in terms of FF(first flush) index, first flush phenomenon was clearly observed in the trunk road(FF : 0.89-1.43). However, such mass delivery behavior was not apparently shown in urban highway(FF : 0.90-1.11) and national road(FF : 0.81-1.41).

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.97-103
• /
• 2020

Wireless sensor networks collect and analyze sensing data in a variety of environments without human intervention. The sensor network changes its lifetime depending on routing protocols initially installed. In addition, it is difficult to modify the routing path during operating the network because sensors must consume a lot of energy resource. It is important to measure the network performance through simulation before building the sensor network into the real field. This paper proposes a WSN model for a low-energy adaptive clustering hierarchy protocol using DEVS kernel models. The proposed model is implemented with the sub models (i.e. broadcast model and controlled model) of the kernel model. Experimental results indicate that the broadcast model based WSN model showed lower CPU resource usage and higher message delivery than the broadcast model.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.9-21
• /
• 2020

The Gross Merchandise Volume for the China's Singles day event in 2019 is about $38.4 billion. More than 500 million customers placed about 1.3 billion orders a day, and the related delivery volume is 2.8 billion. The main technologies associated with the 4^th Industrial Revolution are bringing about a big change in the logistics industry. The purpose of this study is to present implications by reviewing the main technologies which are applied to China's Singles day event, the introduction of smart logistics in China, and analyzing the progress of Singles day, smart system of Alibaba, its significance. China still has poor infrastructure in non-capital areas. And many Chinese companies are actively introducing and developing smart logistics to cover the vast continental area of China. Singles Day is a representative case in point where the smart logistics and main technologies related to 4^th Industrial Revolution are applied. The data obtained through smart logistics would be reused for inventory management, production planning, and order processing, contributing to the optimization of the company's operations. In the era of the 4^th Industrial Revolution, domestic companies and governments need to make efforts to expand the introduction of smart logistics to secure competitiveness with global advanced companies.

• Journal of KIISE:Software and Applications
• /
• v.35 no.2
• /
• pp.70-80
• /
• 2008

Today, businesses have to respond with flexibility and speed to ever-changing customer demand and market opportunities. Service-oriented architecture (SOA) is the best methodology for minimizing the complexity and the cost of enterprise-level infrastructure and for maximizing the productivity and the flexibility of an enterprise. Most of the enterprise-level SOA delivery strategies deal with the top-down approach, which organization has to define the business processes, to model business services, and to find the required services or to develop new services. However, a lot of peoples want to maximally reuse legacy component-based systems as well as to deliver SOA into their organizations. In this paper, we propose a bottom-up approach for identifying business services with proper granularity. It can improve the reusability and maintenance of services by considering not data I/O of components of legacy applications but GUI event patterns. Our proposed method is applied to MIS with 129 GUIs and 13 components. As a result, the valiance of the coupling value of components is increased five times and three business services are distinctly exposed. It also provides a 49% improvement in reducing the relationship problems between services over a service identification method using only partitioning information of components.