• 한국전자파학회논문지
• /
• 제22권1호
• /
• pp.9-15
• /
• 2011

E 모양의 이중 모드 공진기를 변형하여 상.하측 대역의 대역폭 조절이 가능한 이중 대역 통과 필터를 설계 제작하였다. 변형된 E 모양의 이중 모드 공진기를 이용하여 even 모드 간의 결합이 odd 모드 공진점에 영향을 미치지 않게 만들었고, 이를 통하여 상측 대역의 대역폭을 효과적으로 조절할 수 있다. 그리고 급전 선로간의 결합을 통하여 차단 대역에 전송 영점을 발생시켜 차단 특성을 높였다. 대역폭 조절이 가능함을 보이기 위해 중심 주파수 2 GHz와 3 GHz에서 140 MHz의 동일한 대역폭을 갖는 필터를 설계하였다.

• ETRI Journal
• /
• 제35권2호
• /
• pp.344-347
• /
• 2013

This letter presents a compact dual-mode tri-band bandpass filter by using a short-circuited stub-loaded stepped-impedance resonator (SIR) and a short-circuited stub-loaded uniform impedance resonator. Also, a hairpin SIR geometry is introduced to miniature the size of this filter while maintaining excellent performance. The use of a short-circuited stub at the central point of the hairpin SIR can generate two resonant modes in two passbands. Its equivalent circuit structure is analyzed by using the even-odd mode theory. For demonstration purposes, a tri-band filter for the applications of the Global Positioning System at 1.57 GHz, Worldwide Interoperability for Microwave Access at 3.5 GHz, and wireless local area networks at 5.2 GHz is designed, fabricated, and measured.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.122-129
• /
• 2001

A characterization procedure for analyzing symmetric coupled MIS(Metal-Insulator-Semiconductor) transmission line is used the same procedure as a general single layer symmetric coupled line with perfect dielectric substrate from the extraction of the characteristic impedance and propagation constant for even- and odd-mode. In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite- Difference Time-Domain(FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Symmetric coupled MIS transmission line parameters for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency- dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• 한국항해학회지
• /
• 제25권2호
• /
• pp.131-136
• /
• 2001

CATV(Cable Television) 시스템용 집중정수형 방향성 결합기의 새로운 해석법을 제안하였다. 본 논문에서는 결합선로형 방향성결합기에 대한 우·기 모드 해석법을 변성기형 방향성 결합기에 적용하였다. 측정된 우·기 모드 반사계수만을 사용하여 구한 S-파라미터의 결과와 계산치를 비교함으로서 제안된 해석법의 타당성을 입증하고, 제안된 해석법을 적용하여 설계·제작한 신호분기기는 5 MHz ∼ 4,000 MHz까지 광대역화 됨을 보였다.

• 한국전자파학회논문지
• /
• 제12권3호
• /
• pp.346-351
• /
• 2001

CATV, DBS(Direct Broadcasting Satellite) 및 CS (Communication Satellite) 시스템용 신호분기기의 새로운 해석법을 제안하였다. 본 논문에서는 결합선로형 방향성 결합기에 대한 우.기 모드 해석법을 변성기형 방향성 결합기에 적용하였다. 측정된 우.기 모두 반사계수만을 사용하여 S-파라미터의 결과와 계산치를 비교함으로써 제안된 해석법의 타당성을 입증하고, 제안된 해석법을 적용하여 설계.제작한 신호분기기는 5MHz~4,000MHz까지 광대역화되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.149-155
• /
• 2002

A promising new approach to achieve low pollutants emission and improvement of flame stabilities is tested experimentally using a hybrid cyclone jet combustor employing both premixed and diffusion combustion mode, Three kind of nozzles are used for LNG(Liquified Natural Gas) as a fuel. The combustor is operated by two method, One is ATI(Air Tangential Injection) mode, generated swirl flow by air as general swirl combustor, and the other is PTI(Premixed gas Tangential Injection) mode, The PTI mode consists of diffusion flame of axial direction and premixed cyclone flame of tangential direction in order to stabilized the diffusion flame. The results showed that the stable region of the PTI mode is more larger than the ATI mode. In addition, the reduction of NOx emission in PTI mode, as compared with that for the ATI mode is at least 50% in stable region. Also, even using the low calorific fuel as $CO_2$-blended gas, the cyclone jet combustor has high performance of flame stability.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.947-948
• /
• 2006

This paper proposes a robust posture stabilization control method for wheeled mobile robots. To solve the robust posture stabilization, we introduce reference generation mode, reference tracking mode, and reference regulation mode. In reference generation mode, a kinematic time-invariant controller is used to generate the reference trajectory which starts from the initial posture of the actual robot to the desired posture. In reference tracking mode, a sliding mode position controller is employed in such a way that the actual robot can follow the reference trajectory in the desired forward or backward moving direction, even in the presence of the disturbances in the dynamics. In reference regulation mode, a sliding mode heading direction controller is used such that the actual robot can maintain the desired posture against the disturbances. In this way, robust posture stabilization can be achieved at almost all global regions.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.325-333
• /
• 2000

The proposed RPSS(Reference Picture Segment Selection) mode is the RPS mode in picture segment of the ISD mode. The RPS mode has the weakness that it has to change the whole reference picture even if transmission error occurs only in the small part of picture. If the RPS mode is applied only to an error-occurred part and a conventional coding scheme is applied to an error-free part, the higher coding efficiency can be obtained. Simulation results show that there is the optimal number of segment which provides that best performance with given environment such as the BER(Bit Error Rate) of wireless channels, the characteristics of imput sequence, what kind of RPSS mode is used, etc. To apply the channel-adoptive RPSS mode later, the scheme which can change the number of segment without INTRA refresh and spatial error propagation is proposed in this paper.

• Interaction and multiscale mechanics
• /
• 제4권2호
• /
• pp.123-137
• /
• 2011

We review a series of crack problems arising in the general deformations of a linearly elastic solid (Mode-I, Mode-II and Mode-III crack) and, perhaps more significantly, when the contribution of surface effects are taken into account. The surface mechanics are incorporated using the continuum based surface/interface model of Gurtin and Murdoch. We show that the deformations of an elastic solid containing a single crack can be decoupled into in-plane (Mode-I and Mode-II crack) and anti-plane (Mode-III crack) parts, even when the surface mechanics is introduced. In particular, it is shown that, in contrast to classical fracture mechanics (where surface effects are neglected), the incorporation of surface elasticity leads to the more accurate description of a finite stress at the crack tip. In addition, the corresponding stress fields exhibit strong dependency on the size of crack.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.481-484
• /
• 2000

Practical structures are subject not only to tension but also to shear and torsional loading. Even under uniaxial loading, when the load is not perpendicular to the crack plane, mixed mode crack can occur. Hence, it is necessary to evaluate the fatigue behavior under mixed mode loading. In this study, the propagation behavior of the fatigue crack of the STS304 steels under mixed mode loading condition was investigated. The mode I and II stress intensity factors of CTS specimen were calculated using elastic finite element method with experimental results. The fatigue crack propagation under mixed mode was evaluated by the effective stress intensity factor proposed by Tanaka.