• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3808-3814
• /
• 2023

The thermal stability of nitric acid solutions after contact with non-irradiated and irradiated tributyl phosphate (TBP) and its solution in Isopar-M has been studied. It has been established that exothermic processes occur during heating due to the interaction of soluble radiolysis products and the decomposition of the extractant with nitric acid. Such processes can occur at temperatures below 100 ℃, but unlike a thermal explosion that occurs in seconds, they are longer in time and are accompanied by weak heat evolution. Their intensity depends on the composition of the extractant, the concentration of HNO₃, and the volume ratio of the organic and aqueous phases. The presence of extractant degradation products in raffinates does not pose a risk of a rapid evolution of gaseous products during evaporation, however, the presence of reducing agents can significantly increase the intensity of the exothermic decomposition of raffinates.

• 한국광학회지
• /
• 제9권2호
• /
• pp.76-85
• /
• 1998

서서히 용액을 증발시키는 늦은 용액증발법을 이용하여 유기단결정 p-toluene sulfonate(PTS) 덩어리와 박막을 제작하였다. 유기 단결정 PTS 덩어리는 Z-scan 방법을 이용하여 1600 nm, 95fs 레이저 광으로 3차와 5차 비선형 굴절률 $n_{2}$와 $n_{3}$를 측정하였으며, PTS 박막 도파관에서는 다중모드 출력을 관측하였다. 입력광의 세기가 2~5 GW/$cm^{2}$영역에서 PTS의 비선형 광학계수는 $n_{2}=6{\times}10^{-4}cm^{2}$/GW, $n_{3}=-7{\times}10^{-5}cm^{4}/GW^{2}$이고 2광자 흡수와 3광자 흡수는 없었다. 빛의 세기가 강한 5~16 GW/$cm^{2}$영역에서는 비선형 슈레딩거식과 빠른 푸리에변환 광전파방법을 이용하여 시료 내에서 전파광의 모양이 가우시안 광에서 왜곡되어 전파되는 것을 전산모의하였다.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.122-128
• /
• 1997

본 연구는 건식 프로세스의 일종인 열증착법을 이용하여 PVDF유기박막을 제조하는 데 있다. 발열원과 기판간의 거리는 5cm로 하였고, 기판의 온도를 $30^{\circ}C$로 유지시키면서 반 응조의 진공도가 $2.0\times10^{-5}$Torr로 되었을 때 발열원의 온도를 6~$8^{\circ}C$/min로 상승시켜, 발열 원의 온도가 $270^{\circ}C$될 때 셔터(shutter)를 열고 증착을 개시하였다. 전계인가 강도의 증가에 따라 $\alpha$형 피크들인 $530\textrm{cm}^{-1},795\textrm{cm}^{-1},1182\textrm{cm}^{-1}$ 피크는 점점 작아지고 $\beta$형 피크 인 $510\textrm{cm}^{-1},1273\textrm{cm}^{-1}$ 피크가 증가함을 알 수 있었다. 전계인가강도 71.4kV/cm 이하에서는 $530\textrm{cm}^{-1}$ 피크가 $510\textrm{cm}^{-1}$피크의 강도보다 큰 것을 알 수 있는데 이는 $\beta$형 성분보다 $\alpha$형 성분이 필름의 특성을 지배함을 알 수 있었다. 이상의 결과로 전계인가 강도의 증가에 따라 PVDF 유기박막의 분자쇄는 $\alpha$형인 TGT 또는 TG'T에서 $\beta$형인 평면지그재그 TT형태로 변화함을 알 수 있다.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.341-345
• /
• 2002

Nanoparticles of $Fe_2O_3$ with a mean particle size of 4-30 nm have been prepared by a pulsed wire evaporation method, and its structural and magnetic properties were studied by SQUID magnetometer and Mossbauer spectroscopy. From the main peak intensity of XRD and absorption rate of Mossbauer spectrum, the amounts of $\gamma-Fe_2O_3$ and $\alpha-Fe_2O_3$ in as-prepared sample are about 70% and 30%, respectively. The coercivity (53 Oe) and the saturation magnetization (14 emu/g) are about 20% of those of the bulk $\gamma-Fe_2O_3$. The low value of coercivity and saturation magnetization indicate that the $\gamma-Fe_2O_3$ phase nearly shows the spin glass-like behavior. Analysis of the set of Mossbauer spectrum indicates a distribution of magnetic hyperfine fields due to the particle size distribution yielding 20 nm of average particle size. The magnetic hyperfine parameters are consistent with values reported of bulk $\gamma-Fe_2O_3$ and $alpha-Fe_2O_3$. A quadrupole line on the center of spectrum represents of superparamagnetic phase of $\gamma-Fe_2O_3$ with a mean particle size of 7 nm or below.

• 한국결정성장학회지
• /
• 제4권3호
• /
• pp.210-222
• /
• 1994

축방향의 균일한 자장이 Czochralski 도가니에 가하여졌을 때의 유동장, 온도장 및 산소의 농도장이 수치적으로 연구되었다.Czochralski 유동장과 농도장에 작용하는 부력, thermocapillarity, 원심력, 자성력, 산소의 확산계수, 산소의 segregation coefficient, SiO형태의 evaporation, 도가니벽의 ablation 등이 고려되었다. 회전방향으로의 대칭성으로부터 자오면에서의 속도성분과 회전방향의 속도성분, 온도, 전류의 흐름 등이 먼저 정상상태에 도달하였다고 가정하고 초기에 일정한 산소의 농도가 주어진 상황에서 비정상 상태의 산소의 농도장이 해석되었다. Czochralski 유동장에서의 대류와 확산에 의한 산소의 전달현상이 파악되었으며 결정성장 표면으로 흡수되는 산소의 농도가 연구되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1283-1285
• /
• 1997

In this paper, structural, optical and electrical properties of $Cd_{1-x}Zn_xS$ thin films prepared by co-evaporation method were studied. The crystal structure of $Cd_{1-x}Zn_xS$ films deposited at a substrate temperature of $150^{\circ}C$ was hexagonal with the c axis aligned perpendicular to the substrate. As increasing composition parameter x, the intensity of (002) peak decreased, which means poor crystalline and decreasing of preferential orientation. The optical bandgap of $Cd_{1-x}Zn_xS$ films varies from 2.41eV for CdS to 3.48eV for ZnS with x. The resistivity of the $Cd_{1-x}Zn_xS$ films increased with x.

• Bulletin of the Korean Chemical Society
• /
• 제18권7호
• /
• pp.761-766
• /
• 1997

Phospholipase C from Clostridium perfringens is known to catalyze the hydrolysis of phospholipids in biological membranes. In this study, a simple and sensitive method for assaying phospholipase C was developed by using liposomes entrapping calcein as a fluorescent marker. Phospholipase C-induced lysis of liposomes was determined by measuring the fluorescence intensity of calcein released out from liposomes, Various liposomes with different compositions were prepared by reverse-phase evaporation method to investigate the effect of liposomal composition on the lytic activity of phospholipase C. The calcein-entrapping efficiency of liposomes was affected by the chain length of fatty acid in phosphatidylcholine constituting liposomes. The lytic activity of phospholipase C was the highest against liposomes prepared with eggPC. The lytic activity decreased with increasing chain length of fatty acid in phosphatidylcholine. Incorporation of cholesterol more than 20% into the liposomal bilayer inhibited the phospholipase C-induced lysis. The lysis of liposomes was more greatly increased by the addition of 10 mM of calcium. The lytic activity of phospholipase C was also affected by the surface charge of liposomes. Taken together, it was concluded that reverse-phase evaporation vesicles composed of dipalmitoylphosphatidylcholine and cholesterol in the molar ratio of 9 : 1 allowed to detect the lowest concentration of phospholipase C (0.10 μg/assay volume). This study suggested that the use of liposomes can provide a simple, sensitive and inexpensive method for assaying phospholipase C.

• 천문학회보
• /
• 제41권2호
• /
• pp.67.3-68
• /
• 2016

An X1.6 flare occurred in AR 12192 on 2014 October 22 around 14:06 UT and was observed by Hinode, IRIS, SDO and RHESSI. We analyze a bright kernel which produces a white light flare (WLF) with continuum enhancement and a hard X-ray (HXR) peak. Taking advantage of the spectroscopic observations of IRIS and EIS, we measure the temporal variation of the plasma properties in the bright kernel in the chromosphere and corona. We found that explosive evaporation was observed when the WLF occurred, even though the intensity enhancement in hotter lines is quite weak. The temporal correlation of the WLF, HXR peak, and evaporation flows indicates that the WLF was produced by accelerated electrons. To understand the white light emission processes, we calculated the deposited energy flux from the non-thermal electrons observed by RHESSI and compared it to the dissipated energy estimated from the chromospheric lines (Mg II triplet) observed by IRIS. The deposited energy flux from the non-thermal electrons is about $3.1{\times}10^{10}erg\;cm^{-2}s^{-1}$ when we assume a cut-off energy of 20 keV. The estimated energy flux from the temperature changes in the chromosphere measured from the Mg II subordinate line is about $4.6-6.7{\times}10^9erg\;cm^{-2}s^{-1}$, 15 - 22 % of the deposited energy. By comparison of these estimated energy fluxes we conclude that the continuum enhancement was directly produced by the non-thermal electrons.

• Restorative Dentistry and Endodontics
• /
• 제35권5호
• /
• pp.321-334
• /
• 2010

연구목적: 본 연구는 상아질 접착제의 잔류 용매가 접착 효율에 미치는 영향을 평가하고자 하였다. 연구 재료 및 방법: 본 연구에서는 5세대 2단계 산부식형 접착제와 7세대 단일과정 자가부식형 접착제를 사용하였다. 상아질 접착제의 증발률과 전환률, 적용 후 용매의 공기건조 방법에 따른 미세인장결합강도를 측정하였으며 접착 계면을 FE-SEM을 이용하여 관찰하였다. 결과: 1. 시간에 따라 접착제의 증발률은 증가하나 접착제의 종류에 따라 증가 양상이 서로 달랐다. 2. 대부분 전환률은 증발률에 비례하는 경향을 나타내었다. 3. 공기건조 방법에 따라 결합강도는 대부분 under군, control군, over군 순으로 증가하는 양상을 나타내었다. 4. FE-SEM에서 아세톤을 용매로 사용하는 접착제는 공기건조 방법에 따라 droplet이나 gap이 관찰되었다. 결론: 상아질 접착제의 잔류 용매는 접착 효율에 부정적인 영향을 미치기 때문에, 상아질 접착제의 선택과 사용 시 용매의 종류와 특징에 대한 적절한 이해가 필요할 것이다.

• 한국버섯학회지
• /
• 제16권4호
• /
• pp.331-333
• /
• 2018

The incorporation of Shiitake culture into sawdust is a widely utilized technique that can assist in reducing the cost and time consumption associated with oak cultivation. In sawdust cultivation, browning of the surface mycelia is an important stage with respect to the utility and longevity of the sawdust media. Surface browning forms a protective coating on the substrate, which can inhibit the invasion of pathogens and suppress water evaporation. Several different light sources (red LED, white LED, blue LED, and fluorescent light) were used and the intensity of illumination was carefully controlled (1.5, 10.5, $20.5{\mu}mol/m^2s$ for LEDs and 10, 100, 300 lux for the fluorescent light) to induce browning. The light sources were regulated via a 1 h on/off cycle in a controlled room environment at a temperature of $20^{\circ}C$, 60% humidity, and 1200 ppm $CO_2$ concentration for 60days. The browning effect varied depending on the source and the intensity of illumination. This effect was most effectively induced at $1.5{\mu}mol/m^2s$ for the red and blue LEDs. All light sources induced less browning at the highest intensity of illumination. This indicates that intensity values higher than $20.5{\mu}mol/m^2s$ in the case of the LEDs and 300 lux for the fluorescent light are not effective. After harvesting of the fruit bodies, we measured the weight, length, and width of the pileus and stipe in addition to their chromaticity and hardness. Treatment with $1.5{\mu}mol/m^2s$ blue LED produced the best harvest with the highest average chromaticity, weight (21.2 g), stipe length (30.8 mm), and hardness (377.9 g), with a fine length and width of the pileus.