• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.4
• /
• pp.560-575
• /
• 2015

This study developed brassieres using a suspension system with the elastic panel on the inside of the brassiere cup to replace the wires for 20s women with large and elongated breasts. The following results were obtained by analyzing clothing pressure and a subjective evaluation of brassieres with elastic panels at the bottom or side of the various reduction ratios and with the shoulder straps of the brassiere. Brassieres with dual panels (rather than with only the bottom panel) lowered clothing pressure as well as improved wearing comfort and function. Compared to brassieres with a panel of 10%, brassieres with a panel of 15% lowered clothing pressure and provided superior wearing comfort. In this case, the higher the reduction ratio of the side panels increased clothing pressure on the shoulder, but provided superior well-fit, bust-up, and vibration restraint. To reduce the reduction ratio of the side panel decreased clothing pressure on the shoulder and decreased support functions. Therefore, the reduction ratio of the side panels should be determined by preferable functions such as wearing comfort that depend on the needs of the wearer. It is suggested that a brassiere with a dual elastic panel can replace the brassiere wire.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.800-814
• /
• 2015

This study develops baseball uniforms for amateur baseball players with excellent appearance and functional movement. This study selected a conventional baseball uniform and developed a new one for amateur baseball players with improved function and appearance based on previous research results. In case of developed baseball uniform materials, this study used polyurethane mixed fabric for the top to improve flexibility. A mesh material was used at the armpit, back, and bottom of the top, side line of pants and pockets to improve breathability. In addition, quilted material was added to the knee to improve durability and protection. For the patterns and design, this study used a gusset under the arm to assist in comfortable movement as well as reduced the length of the top and circumference of the hem to decrease unnecessary parts. For the pants, this study used a waistband gripper to avoid the top riding up, added darts behind the knees to bend comfortably, and added additional fabric inside the hem to prevent dirt. In addition, we reduced the width and length of the pants. Wearing evaluation was divided into appearance evaluation by experts and on-site-wearing test by baseball players. The wearing evaluation results for the developed baseball uniform indicated higher evaluations than a conventional baseball uniform in all sections as well as showed significant differences in all sections. The result of movement adaptability evaluation showed the highest satisfaction for 'the top does not ride up' and 'dirt do not get in'.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.113-123
• /
• 2016

The purpose of this study is to look into the effect of wearing color lenses on one's image and was based on 221 college students in Gyeonggi-do and Gangwon-do. I examined how it appears as the evaluation factor visually. After by looking in the different image effect and relevance as to the classified evaluating factors, I tried to look into what effect the color lenses has on woman eye and image. The result is as follows. It appears that wearing color lenses makes one look fancier, more attractive, sophisticated, and favorable, whereas not wearing color lenses makes one look softer, weaker, more innocent, and comfortable. Analyzing these evaluations showed that wearing color lenses has most to do with attractiveness followed by pureness, familiarity, and decorativeness in order, whereas not wearing color lenses has most to do with familiarity followed by attractiveness, pureness, and decorativeness. It is considered that eyes with color lenses on them make the person seem decorative, attractive, and pure, which brings effect of improving one's eye and face image. Analyzing the correlation between each color lenses-wearing factor and one's image showed that when a person is wearing color lenses, the more the person is considered decorative, pure, and attractive, the more it has to do with improving the person's eye and face image. The result, therefore, shows that wearing color lenses makes one's eye and face image attractive, pure, and decorative, and wearing them is an important means to improve one's eye and face image.

• Journal of the Korean Home Economics Association
• /
• v.25 no.3
• /
• pp.27-36
• /
• 1987

The purpose of this study was to develop a slacks pattern drafting method for the fatty women of 40∼55 aged Korean women who are more than 1.5 Rohrer's index on the basis of their physical characteristics. The study was composed as follows; 1. Body measurement and statistical analysis: One hundred and thirty women between the ages of 40∼55 over 1.5 Rohrer's index were measured on 21 items. Mean, standard deviation, variance, maximum, minimum, range were computed. 2. 4 types of conventional slacks pattern were collected. The most accepted conventional slacks pattern was decided through wearing test. The new pattern was based onthe most accepted conventional pattern, and developed through wearing tests. 3. Evaluation of the new pattern drafting method: The sensory evaluation was applied to evaluate the new pattern by comparing is with the most accepted conventional pattern. According to the statistical analysis of the result of the 12 items, all the items showed significant differences (α 0.01) between the two, with the new pattern having higher scores.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2019

This study analyzed the pressure, subjective wearing comfort, and design preference of brassiere shoulder straps among women in their 20s and 40s. Experimental clothing was made by different shoulder strap designs on a brassiere. In the four designs (A-D), the front attachment points of the shoulder straps were the same, but the back attachment points were different. Three of them (E, E1, E2) were of a halter neck design, with different front attachment positions. The pressures of A-D were measured at the position passing through the shoulder line (P1), and E-E2 was measured at the back neck (P2) as well as at P1. Subjective wearing comfort and design preference were rated on a 7-point Likert scale. A was determined to exert the highest pressure at the neck side of the design in the pressure measurement analysis of A-E2, whereas E1 exerted the lowest. E was measured to have the highest pressure among the E-E2 designs, whereas E2 had the lowest. Participants preferred A the most and E the least in regards to the subjective wearing comfort of A-E. Thus, participants deem A to be the most comfortable despite the high strap pressure. However, E was the most favored design, despite its poor wearing comfort. Participants' subjective impressions of E-E2 were that E2 was the most uncomfortable, but its design was the most preferred. Consumers' design preferences and subjective impressions of wearing comfort did not match.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.80-90
• /
• 2016

This study presents quantitative evaluation standards for they mobility test, conducted in the process of a slacks fit test. This study quantified the subjects' evaluation on the wearability of slacks to provide objective qualitative evaluation methods for existing mobility tests. The subjects were women of standard bodytype between the ages of 18 and 24 wearing slacks designed to test their mobility based on differences in ease in waist girth, hip girth, crotch length and knee length. A qualitative evaluation tested the wearability of slacks. Clothing pressure and gap area between the body and slacks were measured based on a quantitative evaluation. The clothing pressure and the gap area between the body and slacks (which reflect the results of the wearability test) were presented in this study as quantitative evaluation standards. Clothing pressure tended to increase as the ease of slacks decreased; however, clothing pressure standards, that induce discomfort, differed by body parts. The hip, crotch, and knee area were relatively less sensitive despite the waist and the abdominal area sensitivity to clothing pressure. This study suggests the minimum ease for the appropriate wearing comfort of slacks by region and motion as standards for the quantitative evaluation of mobility tests. These was reset in accordance to the limits of clothing pressure when the minimum ease was considered as wearable but exceeded the clothing pressure limits.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.667-674
• /
• 2010

This study evaluated the convenience and heating performance of 4 heated vests on the market through a trial of the vests. Participants were four healthy men who wore the garments outside in cold temperatures typical of the garments' real conditions of use. As the results, all the participants preferred the product, having an easily operable controller in ergonomic aspects and the good insulation for keeping the body temperature. The heating performance of vests was the most important factor in selecting the best product in this test. Indeed, the vests themselves found not to be sufficiently warm in the experimental condition. Thus, heated vests with the enhanced heating performance should be developed so that temperatures in the allowed range can be safely accessed.

• Journal of the Korean Home Economics Association
• /
• v.27 no.4
• /
• pp.41-50
• /
• 1989

Cobaltous Chloride method has been known as a sufficiently good test methodolgy for the dynamic moisture transfer through textile fabrics. In the current study, Cobaltous Chloride method was adopted and modified to test dynamic moisture transfer in clothing under actual wearing conditions. It was possible to test the significant difference between fabric types by controlling the position of CoCl2 impregnated swatch (LD type), time scale of the moisture transfer (within 10 mins), experimental design (split plot desing) and other miscellaneous experimental techniques. As results, it was concluded that Cobaltous Chloried method is a satisfactory screening test to predict moisture related comfort properties of clothing as won.

• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.109-121
• /
• 2017

In this study, we proposed the Bustier which improves the fit and functionality to compensate the physical defects by maximizing the volume up effect using the breast detailed measurements and shapes of the poor breast female subjects. Based on the preliminary study of the problem and preference according to the characteristics of the poor breast women consumers, we produced 1/2 volume mold cups based on the previous research. Respectively. A total of 5 subjects were selected, and new 3 bustier patterns based on the pattern making system of industry were created through direct measurement and shapes. As a result of verifying the usability of the developed bustier by testing the commercially available bustiers and the newly developed bustiers for 5 subjects. In order to compare the existing bustiers with the newly developed bustiers, the appearance evaluation by the expert, the evaluation of the adaptability and satisfaction by the subjects were utilized. Through this experiment, the newly developed bustiers were superior in the evaluation of the motion adaptability and wear comfort as well as appearance test. It was shown that the wear effect of the bustier with the longest back length was the best.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.439-448
• /
• 2018

This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.