• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1707-1718
• /
• 2001

본 연구 목적은 3차원 인체 스캐너를 이용하여 여자 기성복 재킷의 여유량을 비교, 분석하는 것으로, 2사이즈 7브랜드의 재킷의 공극량을 계측하여 분석하였다. 첫째, 재킷 단면둘레 분석 결과, B85(품), B8(허리)를 제외하고 브랜드간에 유의한 차이를 나타내지 않아, 전반적으로, 브랜드간 제품치수에는 차이가 없는 것으로 나타났다. 둘째, 인체와 재킷의 단면둘레 분석 결과, 재킷의 배둘레를 제외한 모든 항목에서 유의한 차이가 나타나 피험자, 재킷 모두 사이즈에 따라 유의적인 차이 가 있음을 알 수 있다. 셋째, 기본사이즈 B85에서는 허리를 제외하고는 패턴 F가 가장 여유량이 많은 것으로 나타났으나, B88의 경우, 부위별로 각기 다른 패턴에서 여유량이 가장 많은 것으로 나타나, 각 부분마다 브랜드별로 그레이딩 룰이 다름을 알 수 있다. 넷째, 착의 단면은 인체와 의복간의 여유량 분포를 명백히 보여주며, 어깨, 가슴, 엉덩이처럼 몸에 밀착되는 부위는 다른 부위에 비해 패턴간, 각도별 변이가 적은 것으로 나타났다. 품, 허리, 배에서는 옆보다는 앞, 뒤로, 가슴에서는 앞뒤 좌우의 30$^{\circ}$방향, 엉덩이의 경우, 옆, 뒤보다는 앞쪽에 여유량이 집중되어 있는 것으로 나타났다. 다섯째, 브랜드별 평균공극길이에 대한 분산분석 결과, 전반적으로 패턴 F가 가장 공극량이 많고, 패턴 D가 작은 것으로 나타났다. 여섯째, 사이즈별 평균공극길이에 대한 t-검정 결과, 품과 배 부분에서, B88이 B85보다 공극량이 적은 것으로 나타나, 기준부위인 가슴, 허리, 엉덩이 부분뿐만 아니라 품, 배둘레의 치수에 대응할 수 있도록 그레이딩 룰 값을 산정하여야 함을 알 수 있다.

• The Research Journal of the Costume Culture
• /
• v.29 no.6
• /
• pp.795-809
• /
• 2021

The purpose of this study was first, to clarify the clothing benefits that Uzbek female college students seek through clothing products; and second, to determine whether there is a difference in clothing involvement and clothing purchasing behavior according to the type of clothing benefits. Data were collected from 290 female university students from Tashkent, Uzbekistan, and analyzed using factor analysis, K-means group classification analysis, ANOVA, Duncan test, χ²-test, and frequency analysis. Respondents were classified into four types according to their clothing benefits: individuality/economy-pursuit, comfort-pursuit, fashion/brand-pursuit, and indifference. Significant differences were identified in terms of clothing involvement, information sources, clothing evaluation criteria, clothing store attributes, clothing wearing conditions (including monthly clothing expenses), number of purchases per year, clothing purchase location, clothing preference style, and clothing dissatisfaction. The fashion/brand-pursuit and personality/economy-pursuit types were influenced more by fashion and symbolism of clothing involvement, information sources, clothing evaluation criteria, and clothing store attributes. The individuality/economy-pursuit type purchased more frequently, spent more monthly clothing expenses, and used the internet. Clothing store attributes were considered more important by female students than the other attributes. In these results, clothing benefits were identified as consumer characteristics of female Uzbek college students and market segmentation was determined. In addition, it is meaningful in providing basic data for efficient marketing activities and minimizing trials and errors in establishing local-friendly strategies for target customers in different cultures.

• International Journal of Highway Engineering
• /
• v.5 no.3 s.17
• /
• pp.31-42
• /
• 2003

The KHC Test Road project was initiated on 1991 to develop Korean Pavement Design Guide. It was constructed along the Joongbu Inland Expressway line between Yeoju and Gamgok. It is two-lane wide expressway containing fifteen asphalt and twenty-five Portland cement concrete test pavement sections. Various sensors were installed in the Test Road to evaluate the behavior of test pavement sections under the influence of traffic load and environmental change. The most important issues in the sensor installation are the accurate location and long-term survivability. They are directly influenced by the sensor installation methodology. The methodology for asphalt strain gages is mainly discussed in this paper because it is the second important sensors in the KHC Test Road project. In order to find the best methodology, we evaluated existing methodology from prior experience and several conducted test installations. We have tried mound, block out, and trench cuts since 2000. Among three methods, block out was the most effective one in terms of accurate location, long-term survivability, and material homogeneity. However, this method cannot be applied to the wearing coarse so that the mound method was used as an alternative. The block out method was applied to base and intermediate layers while the mound method was used to the wearing coarse. Three hundred seventy-four asphalt strain gauges were installed on asphalt pavement sections from September 3rd to November 18th in 2002. According to the sensor measurement evaluation, 6.3% of sensor demonstrated over ranged readings for mound method installation and 2.5% did for block out method installation. We lost only two sensors during the installation. It is 99.5% survival and it is excellent survival rate according to other experience.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.921-935
• /
• 2016

This research analyzed the manual performance of firefighting protective gloves on global markets in order to suggest an evaluation method for firefighting protective gloves wearing comfort. We collected 13 types of firefighting gloves from domestic and international markets (7 types from Korea, 3 types form Europe, 2 types from the U.S and 1 type from Japan). We set the Don-Doff test as a basal requirement for moving toward to further manual performance tests that consist of: ASTM dexterity test, Minnesota dexterity test, Bennett hand tool test and ASTM torque test. All gloves were evaluated in dry and wet conditions, we included eight current male firefighters ($43.4{\pm}7.0yr$ in age, $173.1{\pm}4.4cm$ in height, $79.9{\pm}9.2kg$ in body mass) for the tests. Four gloves (1 Korea, 1 U.S, 1 Germany, and 1 Japan) out of thirteen firefighting gloves passed the Don-Doff test and had great subject preferences. There was no significant difference between dry and wet conditions on the ASTM dexterity test, Minnesota dexterity test, Bennett hand tool test and ASTM torque test. However, Japanese gloves had the greatest score and showed 3-4 times faster completion time on the ASTM dexterity test (p<.05), 1.2-1.5 times faster on the Minnesota dexterity test (p<.05), as fast as the bare hand on Bennett hand tool test (p<.05), and greater performance on the ASTM torque test compared to bare hand. In conclusion, Don-Doff test in wet conditions should be the first step for a mobility evaluation of domestic firefighting protective gloves; subsequently, a comprehensive test assorting ASTM, Minnesota, and Bennett test should be developed as a second step. The current ASTM torque test can be adopted as a third step. This three-step-method for evaluating firefighting protective glove mobility can be expected to expand into surveys of other safety gloves in Korea.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.125-137
• /
• 2021

This study was intended to develop a prototype of new Hanbok Cheollik one-piece based on design extracted through a preference survey on new Hanbok Cheollik one-piece. Through this, it was intended to provide information on patterns that are fundamental to the production of new Hanbok Cheollik one piece. The pattern of the experiment was produced by modifying D pattern, which was selected as excellent in the comparison of commercial Cheollik one-piece patterns. The SPSS 26.0 program was used to analyze the appearance evaluation of patterns. As a result of the 1^st evaluation of appearance and garment pressure, the shoulder, sleeve length, skirt length and sleeve width required modification, reducing the sleeve length by 8.0cm and the sleeve width by 1.0cm in total. The length of the skirt was reduced by 5.0cm and the shoulder end point was reduced by 0.5cm on both sides to modify the shoulder width. As a result of the 2^nd evaluation, the waist area, sleeve width, and skirt wrinkles were required to be corrected, reducing 2.0 cm waist width and 1.0 cm sleeve width and removing wrinkles on the front center and side area. The final pattern was highly appreciated. In future studies, it is thought that research should be conducted through study of Cheollik one-piece pattern according to material and age and the actual wearing experiment according to fabric and age.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.23-31
• /
• 2004

As a research method that weighs and combines evidence, meta analysis produces evidence that is more powerful than the original studies. The purpose of this study was to compare the jntercanine/intermolar expansion and rapid/slow expansion in the maxillary expansion treatment using meta analysis. Medline was searched from 1979 to 2000 for all studies examining the stability of transverse expansion of the human maxilla, and 388 articles were found. Then these articles were reduced to 7 based on the defined inclusion and exclusion criteria, and a cumulative Meta evaluation score was computed for each study. The results were as follows; 1. The mean expansion in intermolar width was 6.0mm. of the 6.0mm, 4.8mm was retained and $20.0\%(1.2mm)$ was relapsed while wearing retainers. 2. In intercanines width, the mean expansion was 3.7mm. of the 3.7mm, 2.6mm was retained and $29.7\%(1.1mm)$ was relapsed while wearing retainers. 3. The differences In the amount of expansion and relapse between rapid expansion group and slow expansion group were less than $6\%(0.1-0.3mm)$. But, there might be differences in the skeletal/dental exapnsion ratios according to the expansion method.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.2
• /
• pp.109-116
• /
• 2016

Purpose: The aim of this study was to evaluate correlations between denture satisfaction and various factors related to patients' and wearing dentures. Materials and Methods: Total 43 edentulous patients were recalled and they were wearing complete dentures fabricated more than one year ago. For patients' subjective assessment, the questionnaire based on the various literatures was developed and applied to patients for data acquisition. In addition, correlations were evaluated between subjective assessment and denture satisfaction score. For statistical analysis, Spearman correlation coefficient, multiple regression analysis, Mann-whitney U test and Kruskal-Wallis test were used to found out what the most considerable factors to denture satisfaction score (P < 0.05). Results: Denture satisfaction score of maxilla was higher than mandible (P < 0.05). In functional aspects, maxillary denture were received a favorable evaluation. Especially fit and pain causing were highly correlated to satisfaction. Gender, age, using period, visiting times after manufacturing denture were unrelated to satisfaction. But previous experience was related to denture satisfaction. Conclusion: Denture satisfaction was determined by a combination of various factors related to patients.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.331-342
• /
• 2007

This study focused on developing MP3 smart clothing products and usability evaluation. MP3 smart clothing which was developed in this study contains e-textile keypad and a kit. The kit consists of MP3 Player, remote controller module and ear phone, and are easy to assemble and dismantle. And usability evaluation about MP3 smart Clothing which was developed in this study contains e-textile keypad and a kit. For making the MP3 Smart clothing, e-textile signal line and keypad was developed and a metal connection ring also was manufactured to adhere closely e-textile signal line to keypad. The last products are two kinds of MP3 smart clothing, jacket style of MP3-YSJ(Yonsei Smart Jacket) and safari style of MP3-YSS(Yonsei Smart Safari). Then usability evaluation conducted two times about MP3 smart clothing developed. Usability evaluation is classified by a module evaluation and an item evaluation. The module evaluation measured external appearance, material, a music controller, an ear phone(or a mini speaker) and connector. The item evaluation measured social acceptance, feeling of wearing, utility, easiness of maintenance and safety. The module evaluation described totally positive results in the first usability evaluation about MP3-YSJ 1.0 and MP3-YSS 1.0. The item evaluation shows a lower score in the social acceptance, especially the easiness of connector maintenance and the social acceptance of music-controller in MP3-YSJ 1.0 and MP3-YSS 1.0. The second usability evaluation conducted with improved products by the first usability test results. Results from second item evaluation indicated needs to improve the easiness of connector & music-controller maintenance and the social acceptance of music-controller in MP3-YSJ 2.0. In MP3-YSS 2.0, the easiness of material management and the social acceptance of music controller & connector needed to improvement. In particular, users felt inconvenience in the social acceptance because of e-textile keypad arrangement. To outweigh this disadvantage, further study is needed about keypad interface of the music controller.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.183-196
• /
• 2015

This study aims to develop sleeve pattern of tailored jacket which shows seamlessly beauty of females in their twenties who have relatively smaller change of body compared people of other ages and has outstanding functional operation. So we selected a pattern of manufacturer who received highest score after evaluating wearing condition of three types of jacket in the industry, whose targets are career women in their twenties and then tested its appearance and functional operation of 6 experimental jackets with armhole depth of B/4 and B/4-1(cm) along with sleeve cap height of A.H/3, A.H/3+1, A.H/3+2. As a result, the pattern which has good result of external appearance evaluation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+2 as well as sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+1. The pattern of good result for movement adaptation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3 as well as sleeve with armhole depth of B/4 and sleeve cap height of A.H/3. So we could find that the larger is the armhole depth and height of sleeve, the better influence on adaptability of jacket it makes and that the smaller is the armhole depth and height of sleeve, the better influence on movement adaptability of jacket it makes. It has been proved that armhole depth of tailored jacket of females in their twenties doesn't affect significantly on its appearance when designing it but it makes good influence on movement adaptability when experimental clothing has armhole depth of B/4-1and that sleeve cap height of A.H/3 that is 1cm shorter than A.H/3+1 which is used in industry makes good influence on appearance and functional operation.