• Journal of Distribution Science
• /
• 제10권7호
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

• Journal of Korean Society of Environmental Engineers
• /
• 제36권11호
• /
• pp.771-780
• /
• 2014

In this study, the various organic supports (i.e., silicone, acrylonitrile-butadiene-styrene, epoxy, and, butadiene rubber) with great sorption capacity of organic contaminants were chosen to develop nano-ZnO/organic composites (NZOCs) and to prevent the detachment of nano-ZnO particles. The water resistance of the developed NZOCs were evaluated, and the feasibility of the developed NZOCs were investigated by evaluating the removal efficiency of 1,1,2-trichloroethylene (TCE) in the aqueous phase. Based on the results from water-resistance experiments, long-term water treatment usage of all NZOCs was found to be feasible. According to the FE-SEM, EDX, and imaging analysis, nano-ZnO/butadiene rubber composite (NZBC) with various sizes and types of porosity and crack was measured to be coated with relatively homogeneously-distributed nano-ZnO particles whereas nano-ZnO/silicone composite (NZSC), nano-ZnO/ABS composite (NZAC), and nano-ZnO/epoxy composite (NZEC) with poorly-developed porosity and crack were measured to be coated with relatively heterogeneously-distributed nano-ZnO particles. The sorption capacity of NZBC was close to 60% relative to the initial concentration, and this result was mainly attributed to the amorphous structure of NZBC, hence the hydrophobic partitioning of TCE to the amorphous structure of NZBC intensively occurred. The removal efficiency of TCE in aqueous phase using NZBC was close to 99% relative to the initial concentration, and the removal efficiency of TCE was improved as the amount of NZBC increased. These results stemmed from the synergistic mechanisms with great sorption capability of butadiene rubber and superior photocatalytic activities of nano-ZnO. Finally, the removal efficiency of TCE in aqueous phase using NZBC was well represented by linear model ($R^2{\geq}0.936$), and the $K_{app}$ values of NZBC were from 2.64 to 3.85 times greater than those of $K_{photolysis}$, indicating that butadiene rubber was found to be the suitable organic supporting materials with enhanced sorption capacity and without inhibition of photocatalytic activities of nano-ZnO.

• Cartoon and Animation Studies
• /
• 통권43호
• /
• pp.47-75
• /
• 2016

This study has analyzed the history of the subcontract animation in Korea that began with Golden Bat of TBC Animation Division in 1966 to 1980s and shed the light on the history of subcontract animation that has been processed over 30 years in Korean animation. For this purpose, through the outlined status of subcontract animation, such as, production company, production status, scale of industry and so forth, the status of the OEM industry then has been checked and it links the solidified background of animation into subcontract production industry with the situation in time for analysis. In addition, on the basis of the foregoing, it is intended to broaden the horizon of the history of animation through the analysis on new search for facilitating the creative animation by overcoming the issues and limits generated by the subcontract animation industry. 1970s was the time that the national objective is to advance heavy-chemical industry and export-led economic growth. From the late 1970s, the animation has been spot lighted as the main-stream export industry through the overseas subcontract orders for animation. Expansion of the subcontract animation production has been influenced from the national policies on public culture, dispersion of color TV, facilitation of video production market and other media changes of the time that led the decline of animation audiences in theaters, and another cause would be in lack of platform of broadcasting companies that avoided the independent animation production for its economic theory. The subcontract animation industry may have the positive evaluation in the aspect of expanding the animation environment, such as, structuring of animation infra, development of new human resources and etc. However, the technology-incentive 'production'-oriented advancement has created distorted structure in advancing the professional human resources due to the absence of 'pre-production' of planning and others as well as the insufficient perception on 'post production (post work)', and it was unable to formulate domestic market by re-investing the capital accumulated for OEM industry into the production of creative animation and it has been assessed as negative aspect. Animation is a cultural and spiritual product of a country. Therefore, the systematic support policy for the facilitation of the creative animation, such as, development of professional human resources, creation of outstanding work, formation of market to make the pre-circulation structure and so forth has to be sought. However, animation is an industry, but there is no perception that it is a cultural industry based on the creativeness, not hardware-oriented manufacturing business. Such a lack of recognition, there was no policies to make the market and facilitate the creative animation by the animation of Korea for this period through the long-term plan and investment for independent work production. Such an attempt is newly begun through diverse searches for protection and advancement of creative animation in Korea after 1990s.

• Journal of the Korean Society of Radiology
• /
• 제14권1호
• /
• pp.15-22
• /
• 2020

PET(Positron Emission Tomography) devices are used as PET/CT or PET/MRI devices fused with the devices of CT or MRI for obtaining anatomical information. Therefore, the devices are constructed in circular ring-type structure whose length of gantry(the main part of filming) becomes wider and the interior depth becomes longer in comparison to other common medical equipments. scintillator, one of the components in PET devices, is inside the gantry, and as it is consisted of crystal which is sensitive to the change of temperature and humidity, large temperature change can cause the scintillator to be damaged. Though scintillator located inside the gantry maintains temperature and humidity with a thermo-hygrostat, changes in temperature and humidity are expected due to structural reasons. The output value was measured by dividing the inside of the gantry of the PET/CT device into six zones, each of which an Adafruit BME 280 temperature and humidity sensor was placed at. A thermo-hygrostat keeps the temperature and humidity constant in the PET/CT room. As the measured value of temperature and humidity of the sensor was obtained, the measured value of temperature and humidity appeared in the thermohygrostat was taken at the same time. Comparing the average measured values of temperature and humidity measured at each six zones with the average values of the thermo-hygrostat results in a difference of 2.71℃ in temperature and 21.5% in humidity. The measured temperature and humidity of PET Gantry is out of domestic quality control range. According to the results of the study, if there is continuous change in temperature and humidity in the future, the aging of the scintillator mounted in the PET Gantry is expected to be aging, so it is necessary to find a way to properly maintain the temperature and humidity inside the Gantry structure.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제18권3호
• /
• pp.111-121
• /
• 2013

Accurate prediction of sea water temperature has been emphasized to make precise local weather forecast and to understand change of ecosystem. The Yellow Sea, which has turbid water and strong tidal current, is an unique shallow marginal sea. It is essential to include the effects of the turbidity and the strong tidal mixing for the realistic simulation of temperature distribution in the Yellow Sea. Evaluation of ocean circulation model response to vertical mixing scheme and turbidity is primary objective of this study. Three-dimensional ocean circulation model(Regional Ocean Modeling System) was used to perform numerical simulations. Mellor- Yamada level 2.5 closure (M-Y) and K-Profile Parameterization (KPP) scheme were selected for vertical mixing parameterization in this study. Effect of Jerlov water type 1, 3 and 5 was also evaluated. The simulated temperature distribution was compared with the observed data by National Fisheries Research and Development Institute to estimate model's response to turbidity and vertical mixing schemes in the Yellow Sea. Simulations with M-Y vertical mixing scheme produced relatively stronger vertical mixing and warmer bottom temperature than the observation. KPP scheme produced weaker vertical mixing and did not well reproduce tidal mixing front along the coast. However, KPP scheme keeps bottom temperature closer to the observation. Consequently, numerical ocean circulation simulations with M-Y vertical mixing scheme tends to produce well mixed vertical temperature structure and that with KPP vertical mixing scheme tends to make stratified vertical temperature structure. When Jerlov water type is higher, sea surface temperature is high and sea bottom temperature is low because downward shortwave radiation is almost absorbed near the sea surface.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제12권3호
• /
• pp.217-226
• /
• 2009

Marine geological storage of $CO_2$ is regarded as one of the most promising options to response climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the marine geological structure such as deep sea saline aquifer. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_2O$, $SO_x$, $H_2S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. In order to design a reliable $CO_2$ marine geological storage system, it is necessary to perform numerical process simulation using thermodynamic equation of state. The purpose of the present paper is to compare and analyse the relevant equations of state including PR, PRBM, RKS and SRK equation of state for $CO_2-N_2$ mixture. To evaluate the predictive accuracy of the equation of the state, we compared numerical calculation results with reference experimental data. In addition, optimum binary parameter to consider the interaction of $CO_2$ and $N_2$ molecules was suggested based on the mean absolute percent error. In conclusion, we suggest the most reliable equation of state and relevant binary parameter in designing the $CO_2-N_2$ mixture marine geological storage process.

• Journal of The Korean Association For Science Education
• /
• 제35권2호
• /
• pp.313-323
• /
• 2015

The purpose of this study is to investigate the cognitive process of student's modeling on a modeling-emphasized argument-based general chemistry experiment. The participants were twenty-one freshman students. Six topics were carried out during the first semester and semi-structured interview was implemented at the end of the semester. Semi-structured interview questions were used to elicit elements of effective model, modeling strategies, difficulties that students have experienced during modeling, and resolving the difficulties that students have experienced during modeling. All student interview data were collected and transcribed. The results of this study are summarized as follows: (1) Elements of effective model were considered to be visual expression, persuasive explanation, and rhetorical structure. (2) Modeling strategies included arranging important keywords or writing the outline, and during the modeling process, students used various data, suggested data after reconstructing, suggested definitions and explanations of core concepts, used meta-cognition, and considering rhetorical structure. (3) Difficulties students have experienced during modeling could be categorized as lack of modeling strategy and understanding. (4) Resolving difficulties students have experienced during modeling could be categorized as modeling strategy and understanding. Students learn the strategy by feedback, modeling experience, evaluation of experimental report, models which they constructed previously and references, and the understanding of contents were achieved through arguments which occurred during classes and during the process of writing the experimental reports. These results suggest that when using modeling in teaching and learning, the argument-based learning strategy can be effective in enhancing students' modeling by helping them to understand meta-modeling with scientific concepts.

• Korean Journal of Environment and Ecology
• /
• 제29권3호
• /
• pp.333-343
• /
• 2015

This research aims at identifying the goshawk's possible and replaceable breeding ground by using the MaxEnt prediction model which has so far been insufficiently used in Korea, and providing evidence to expand possible protection areas for the goshawk's breeding for the future. The field research identified 10 goshawk's nests, and 23 appearance points confirmed during the 3rd round of environmental research were used for analysis. 4 geomorphic, 3 environmental, 7 distance, and 9 weather factors were used as model variables. The final environmental variables were selected through non-parametric verification between appearance and non-appearance coordinates identified by random sampling. The final predictive model (MaxEnt) was structured using 10 factors related to breeding ground and 7 factors related to appearance area selected by statistics verification. According to the results of the study, the factor that affected breeding point structure model the most was temperature seasonality, followed by distance from mixforest, density-class on the forest map and relief energy. The factor that affected appearance point structure model the most was temperature seasonality, followed by distance from rivers and ponds, distance from agricultural land and gradient. The nature of the goshawk's breeding environment and habit to breed inside forests were reflected in this modeling that targets breeding points. The northern central area which is about $189.5 km^2$(2.55 %) is expected to be suitable breeding ground. Large cities such as Cheongju and Chungju are located in the southern part of Chungcheongbuk-do whereas the northern part of Chungcheongbuk-do has evenly distributed forests and farmlands, which helps goshawks have a scope of influence and food source to breed. Appearance point modeling predicted an area of $3,071 km^2$(41.38 %) showing a wider ranging habitat than that of the breeding point modeling due to some limitations such as limited moving observation and non-consideration of seasonal changes. When targeting the breeding points, a specific predictive area can be deduced but it is difficult to check the points of nests and it is impossible to reflect the goshawk's behavioral area. On the other hand, when targeting appearance points, a wider ranging area can be covered but it is less accurate compared to predictive breeding point since simple movements and constant use status are not reflected. However, with these results, the goshawk's habitat can be predicted with reasonable accuracy. In particular, it is necessary to apply precise predictive breeding area data based on habitat modeling results when enforcing an environmental evaluation or establishing a development plan.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.396-400
• /
• 2007

Various ways of automated guideway transit construction are being planned recently owing to the policies of the national government and local municipalities as well as increasing investment from the private sector. Particularly, the increase in the private investment is increasing greatly in SOC (Social Overhead Cost). This trend of promoting private sector investment must be conducted on the basis of a thorough analysis of the economic feasibility of the project from the government and construction companies in the private sector. In other words, an accurate cost analysis of initial investment cost (Construction cost), maintenance/repair cost, profit making through the operation of the concerned facilities, cost of dissolution, etc. in terms of the life cycle is very much in need. Nevertheless, the analysis of uncertainty factors and its probabilistic theory are in need of development so that they can be used in the analysis of the economic feasibility of a construction project. First of all, the actual studies on maintenance/repair cost of automated guideway transit are scarce as of yet, prohibiting an accurate computation of the cost and its economic analysis. Accordingly, this study focused on the uncertainty analysis of the economic feasibility for civil engineering structures among automated guideway transit construction projects based on the rapidly increasing investment on such structures from the private sector. For this research purpose, a cost classification system for the automated guideway transit is proposed, first of all, and the data On the cost cycle of the civil structure facilities and their unit cost are collected and analyzed. Then, the uncertainty in the cost is analyzed from the perspective of LCC. In consideration of the current status with almost no. studies on maintenance/repair of such facilities, it is expected that the cost classification system and the uncertainty analysis technique proposed in this study will greatly enhance LCC analysis and economic feasibility studies for automated guideway transit projects in the future.

• Archives of design research
• /
• 제19권2호
• /
• pp.99-108
• /
• 2006

Based on the results from the already published 'A study on factors that make busy of street space' and 'A study on street the image evaluation of streetscape', this study is an attempt to explore factors, other than the structural factors, that compose the street space and affect the image of street to be more lively. First of all, this study was mainly concentrated on the structure of street space that fits the theory of the previous two theses, stating that the structural ratio ($D/H=0.5{\sim}2$) gives the street an interesting image. The next study subject was the street space that exhibits the amenity and busy of image according to the space structure ratio. I defined that exhibiting amenity and busy means the activation of the street space, and I attempted to extract the activation factors from the component elements. The street space that shows amenity and busy image after the activation was named as 'lively street space' in this study. Furthermore, I selected 20 street spaces, after classifying the whole, according to nations and local characteristics as the previous theses had done and looked for the 'lively street space', whose structural ratio was not in the range of $D/H=0.5{\sim}2$ and the factors that contributed to the Image. As the result, I founded that in case of the business areas with the ratio of $D/H=0.5{\sim}2$, street activation factors were hydroponic facilities, sidewalks, and wayside buildings and In case of the commercial areas, the factors were sidewalk, wayside buildings, hydroponic facilities, and illumination facilities. Especially, 5 commercial areas in Korea and 1 business areas in Japan did not have the structural ratio of $D/H=0.5{\sim}2$, but still exhibited lively image as streets. This was because aside from the structural element, other street activation factors such as facilities also had major contribution in these streets. In other words, in commercial areas in Korea have wayside buildings, sidewalks, and hydroponic facilities as activating factors, whereas in street spaces in business areas in Japan, hydroponic facilities, wayside buildings, and sidewalk factors are influential to the activation of street spaces.