• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.235-236
• /
• 2019

Waterproofing materials and construction methods have been developed and applied to various construction sites since the past. However, there many cases where the waterproofing performance is not satisfactory, leading to continuous water leakage. It has been observed that a key reason for this is because waterproofing method and material selection is not optimized in terms of the appropriate application area and environmental degradation factors. This paper proposes that future selection of waterproofing methods should consider the following evaluation criteria; 1) waterproof performance evaluation according to site conditions, 2) evaluation of construction method, 3) manufacturing and maintenance of waterproofing systems.

• 한국지진공학회논문집
• /
• 제25권3호
• /
• pp.129-135
• /
• 2021

After the manual shutdown of the Wolseong nuclear power plant due to an earthquake in Gyeongju in 2016, anxiety about the earthquake safety of nuclear power plants has become a major social issue. The shear wall structure used as a major structural element in nuclear power plants is widely used as a major structural member because of its high resistance to horizontal loads such as earthquakes. However, due to the complexity of the structure, it is challenging to predict the dynamic characteristics of the structure. In this study, a three-story shear wall structure is fabricated, and the in-structure response characteristics of the shear wall structure are evaluated through shaking table tests. The test is performed using the Gyeongju earthquake that occurred in 2016, and the response characteristics due to the domestic earthquake are evaluated.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.857-865
• /
• 2023

This study aimed to develop a seismic retrofit technique using a steel frame which can be easily transported and assembled on site. This enables the retrofit steel frame to be easily attached to an existing structure minimizing the unwanted gap between the structure and the steel frame assembly. A one-story one-bay RC frame was tested with and without seismic retrofit using the proposed steel frame to verify the seismic retrofit effect of the proposed system, and an analysis model was developed in Opensees for seismic performance evaluation of a case study soft first-story model structure retrofitted with the developed steel frame assembly. Seismic performance of the model structure was also evaluated considering soil structure interaction effect. The experimental study confirmed that the proposed seismic retrofit system can be applied effectively to improve the seismic performance of framed structures. Time history analysis results of the model structure showed that the proposed steel frame assembly was effective in increasing the seismic load resisting capacity of the soft first-story structure. However more steel frame assemblies were required to satisfy the given performance limit state of the model structure located on weak soil due to the negative soil-structure interaction effect.

• 한국조경학회지
• /
• 제50권2호
• /
• pp.23-40
• /
• 2022

유역 오염원의 생태적 정화를 위해 전국적으로 댐 저수지 내 인공습지를 많이 설치하여 운영 중이나 노후화와 효율 저하 문제가 지속적으로 제기되고 있으며 실효성 있는 관리 개선을 위해 우선적으로 구조적 적정성에 대한 객관적 평가가 필요하다. 본 연구에서는 15개 댐의 39개 인공습지를 대상으로 하였으며 문헌조사, FGI 등을 통해 물리적, 식생 구조를 고려한 입지 적정성, 유량공급 시스템, 수심, 유로 길이 대 폭비, 경사도, 식재 종수, 피복도, 식생 건전성 등 8개 평가항목을 도출 후 설문, AHP 분석을 통해 산정한 가중치를 적용하여 평가기준을 제시하였다. 인공습지 구조에 대한 평가결과, 전체 평가점수는 평균 80.8점이었으며 '양호(91~100점)' 등급은 10개소, '보통(71~90점)' 등급은 22개소, '미흡(70점 이하)' 등급은 7개소로 확인되었다. 물리적 구조의 평가점수는 만점 62.4점 중 평균 52.6점으로 '양호' 등급은 14개소, '보통' 등급은 21개소, '미흡' 등급은 4개소로 확인되었다. 입지 적정성의 평가점수는 만점 20.2점 중 평균 18.9점으로 대부분의 인공습지에서 양호한 수준이었으나 유량공급 시스템, 수심, 길이 대 폭비, 유로 경사도는 50% 이상의 인공습지에서 '보통' 이하 등급으로 평가되어 습지 내 안정적인 유량 공급, 흐름 향상을 위해 전반적인 구조 개선이 필요한 것으로 나타났다. 식재 수종, 식생 피복도, 식생 건전성 등 식생 구조 항목의 평가점수는 만점 37.6점 중 평균 28.2점으로 '양호' 등급은 6개소, '보통' 등급은 18개소, '미흡' 등급은 15개소로 약 84%가 '보통' 이하 등급으로 확인되었다. 물리적 구조 평가점수와 식생 구조 평가점수의 Spearman 상관계수를 분석한 결과, 유의미한 상관관계가 있었으며(r = 0.728, p < 0.001), 각 세부 평가인자들 간에도 영향을 미치는 것으로 나타났다. 인공습지 6개소의 현장 사례 검증 결과 평가결과의 적정성을 확인할 수 있었고 입지, 유량 공급, 습지의 형태 등이 습지의 효율과 운영에 큰 영향을 미치고 있는 것으로 나타났다. 본 연구를 통해 자연기반 해법으로서 댐 저수지 내 인공습지 전반의 구조적 취약 요소를 도출하고 향후 인공습지별 관리개선을 위한 유형과 실천적인 대안을 마련하여 인공습지의 효용성을 높이고 다양한 환경적 기능을 증진하는데 기여할 수 있을 것이다.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.949-961
• /
• 2015

The goal of this study is to present numerical modeling and analytical testing in order to evaluate an innovative space truss typed temporary structure, which is used to maintenance and repair of road tunnels. The present space truss structure has merits to use UL-700 high strength steel tube as members and to carry out maintenance and repair works of road tunnels without blocking cars and transportations. Numerical modeling and analytical testing of the space truss are investigated by using commercial engineering software, i.e., ABAQUS 6.5-1, and then it is verified that the truss structure has both structural safety and effective function for maintenances and repairs of road tunnels.

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.20-24
• /
• 2012

In this paper, we perform a ANSYS simulation of assembly structure composed of three parts, bolt, nut, and coil spring, under the loading of a screw torque 640~800 ($N{\cdot}m$) derived from the given bolt tensile strength 10.9, which allows us to investigate a lock-nut mechanism for the prevention of bolt-loosening after three parts are fastened. And also we investigate the safety factor of each component with effective stress distribution obtained from the simulation, which enables us to estimate the structural safety of a new lock-nut structure. Both simulation and investigation shown in this paper will contribute to the development of a new lock nut structure.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.461-467
• /
• 2006

The seasonal change in attached algae and microbial community structure at sedimentation basin of water treatment plant was investigated by using quinone profiles and denaturing gel gradient electrophoresis (DGGE). The photosynthetic bacteria and algae contains PQ-9 and VK-1 as major quinone are major component of the total quinone fraction in attached algae and microorganisms on sedimentation basin trough. The microorganisms containing menaquinones appear to be sensitivity to the change in temperature than those containing ubiquinones. The plot of the mole fraction of dominant quinone species ($f_d$) to the DQ values showed higher sensitivity to the seasonal change in the microbial community structure. The results indicated that quinone and DGGE are useful tool for the evaluation of the changes in the microbial community structure.

• 국제초고층학회논문집
• /
• 제1권3호
• /
• pp.221-228
• /
• 2012

Shanghai Tower is a super high-rise building of 632 m height with 'mega frame-core- outrigger truss' structure system. Due to the complexity and irregularity of structure, shaking table test was carried out to investigate its seismic performance. A 1/40 scaled test model was designed, built and tested on shaking table under earthquake of small, moderate and large levels. The experimental results showed that the structure can meet the requirements of Chinese codes and reach scheduled performance objectives. Elastic and plastic time-history analysis on the structure were carried out and the results were compared to experimental results. Based on the research results some suggestions were proposed to contribute favorable effect on the seismic capacity of the structure.

• The Korean Journal of Ecology
• /
• 제23권6호
• /
• pp.435-438
• /
• 2000

Diameter distributions describe forest stand structure information. Prediction equations for percentiles of diameter distribution and parameter recovery procedures for the Weibull distribution function based on four percentile equations were applied to develop prediction system of even-aged slash pine stand structure development in terms of the number of stems per diameter class changes. Four percentiles of the cumulative diameter distribution were predicted as a function of stand characteristics. The predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level. Statistically, no significant differences were detected based on the data from 236 evaluation data sets. This stand level diameter distribution prediction system will be useful in slash pine stand structure modeling and in updating forest inventories for the long-term forest management planning.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.