• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3213-3228
• /
• 2023

As an important part of the digital reactor, the pin-by-pin wise fine coupling calculation is a research hotspot in the field of nuclear engineering in recent years. It provides more precise and realistic simulation results for reactor design, operation and safety evaluation. CORCA-K a nodal code is redeveloped as a robust pin-by-pin wise neutronics and thermal-hydraulic coupled calculation code for pressurized water reactor (PWR) core. The nodal green's function method (NGFM) is used to solve the three-dimensional space-time neutron dynamics equation, and the single-phase single channel model and one-dimensional heat conduction model are used to solve the fluid field and fuel temperature field. The mesh scale of reactor core simulation is raised from the nodal-wise to the pin-wise. It is verified by two benchmarks: NEACRP 3D PWR and PWR MOX/UO₂. The results show that: 1) the pin-by-pin wise coupling calculation system has good accuracy and can accurately simulate the key parameters in steady-state and transient coupling conditions, which is in good agreement with the reference results; 2) Compared with the nodal-wise coupling calculation, the pin-by-pin wise coupling calculation improves the fuel peak temperature, the range of power distribution is expanded, and the lower limit is reduced more.

• 한국실내디자인학회논문집
• /
• 제22권6호
• /
• pp.212-219
• /
• 2013

This study uses a fashion shop facade design to track human gaze, find gaze frequency for gaze time for the gaze points along the path of sight, and expose the importance of facade design and figure out the value through theoretical systematization. Thus, this study employed the measurement method in physiological psychology which is sight-tracking device with eye-tracking to perform effective data evaluation. To find gaze frequency and study the contents to reflect on the facade, precedent study review, and case study of facade design to collect stimulants to be used in eye-tracking experiment were executed. And the eye-tracking experiment which traces the movement of eye[pupil] was performed. As the result of analyzing gaze frequency, The characteristics of such gaze path formation made the characteristics for gaze frequency even clearer. What was characteristic in the analysis result according to 'average value for gaze time' was that only 8 out of 2000 areas showed over 1 second of frequency and, and all other shoed less than 1 second of gaze time. This indicates that human sight endlessly jumps around, and that it 'Stay' where it has interest. This study found the average of the frequency of this 'Stay' in facade design. This study well presents the major points to add value to the design of the space of facade based on scientific measurement/analysis data obtained through visual understanding. Through such, this study is thought to be able to have a positive interaction with marketing by forming a theoretical background bringing utility to purchase environment and assisting in sales increase.

• 대한건축학회논문집:계획계
• /
• 제35권12호
• /
• pp.65-74
• /
• 2019

The whole world is emphasizing 'creativity' as the core competence of the future society that global talents should have in the 21st century. Korea is also actively promoting the development of creative and convergent talents by recognizing these times and social needs. It is also required to improve the physical environment, which is an essential condition of education. As a result, the curriculum is being implemented as an institutional method for creative education since 2009, and there is a need for continuous research for effective operation of the curriculum system in relation to the establishment of the facilities of credit school system introduced from 2022 to be. The purpose of this study is to evaluate the indoor environment from the viewpoint of creative environment and to suggest the improvement direction for the improvement of the satisfaction of the education space for the students. The subjects of this study were three middle schools operated by the advanced classroom in Busan Metropolitan City. The results of this study were as follows; First, the satisfaction of autonomy and sociality was relatively high and the satisfaction of comfort was the lowest among the characteristics of creative environment. Second, it was found out that a priority should be given to ways to enhance sociality in space so as to support smooth communication and interaction between teachers, students, and students in the environmental plan for creative classroom classroom.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.285-293
• /
• 2021

The construction of underground structures such as power supply lines, communication lines, utility tunnels has significantly increased worldwide for improving urban aesthetics ensuring citizen safety, and efficient use of underground space. Those underground structures are usually constructed along with vertical cylindrical shafts to facilitate their construction and maintenance. When constructing a vertical shaft through the open-cut method, the walls are mostly designed to be flexible, allowing a certain level of displacement. The earth pressure applied to the flexible walls acts as an external force and its accurate estimation is essential for reasonable and economical structure design. The earth pressure applied to the flexible wall is closely interrelated to the displacement of the surrounding ground. This study simulated stepwise excavation for constructing a cylindrical vertical shaft through a centrifugal model experiment. One quadrant of the axisymmetric vertical shaft and the ground were modeled, and ground excavation was simulated by shrinking the vertical shaft. The deformation occurring on the entire ground during the excavation was continuously evaluated through digital image analysis. The digital image analysis evaluated complex ground deformation which varied with wall displacement, distance from the wall, and ground depth. When the ground deformation data accumulate through the method used in this study, they can be used for developing shaft wall models in future for analyzing the earth pressure acting on them.

• 복식문화연구
• /
• 제19권2호
• /
• pp.245-254
• /
• 2011

The purpose of this study was to develop uniform pattern of obese junior-high school girls by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, by using 3D virtual garment simulation, new uniform pattern considered obese junior-high school girls was development. The basic numerical formula were as follows; bust girth=B/2+2.5, armhole depth=B/4, front waist girth=W/4+1.8, back waist girth=W/4+1, front hip girth=H/4+1, back hip girth=H/4+1, chest width=chest width+1.5, back width=back width+1 and back neck width 8cm. Second, according to the results of the new uniform pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new uniform pattern is appropriate for the obese junior-high school girls. Also, new uniform pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권2호
• /
• pp.82-88
• /
• 2004

투과성 항만구조물 주변에서 해수유동을 평가하기 위하여, 흐름 저항을 고려한 수치모형을 사용하였다 조석 조류수치모형에서 임의 물체에 대한 흐름 저항을 고려하기 위하여 수심적분된 전통적인 동수력학 방정식에 항력항을 첨가하였다. 그리고 해수교환율을 평가하기 위하여 임의행보(random walk) 수치모형을 사용하였다. 본 모형은 부산항의 잔교식 항만구조물의 설계에 이용되었으며, 이 때 투과성 구조물은 불투과성 구조물의 경우보다 유속이 증가하고 해수교환율이 향상되는 결과를 보였다. 본 모형은 앞으로 투과성 구조물의 설계에 있어서 유용하게 사용될 수 있을 것으로 기대된다.

• ETRI Journal
• /
• 제29권1호
• /
• pp.8-17
• /
• 2007

In this paper, we present a time domain combined field integral equation formulation (TD-CFIE) to analyze the transient electromagnetic response from dielectric objects. The solution method is based on the method of moments which involves separate spatial and temporal testing procedures. A set of the RWG functions is used for spatial expansion of the equivalent electric and magnetic current densities, and a combination of RWG and its orthogonal component is used for spatial testing. The time domain unknowns are approximated by a set of orthonormal basis functions derived from the Laguerre polynomials. These basis functions are also used for temporal testing. Use of this temporal expansion function characterizing the time variable makes it possible to handle the time derivative terms in the integral equation and decouples the space-time continuum in an analytic fashion. Numerical results computed by the proposed formulation are compared with the solutions of the frequency domain combined field integral equation.

• Journal of Biosystems Engineering
• /
• 제41권1호
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• 농촌계획
• /
• 제23권4호
• /
• pp.99-110
• /
• 2017

This study is to analyze the spatial structure and POE of Jungja(pavilion) shelter for rural village regeneration. 14 Jungja shelter space at rural villages in Gyungbuk province, were investigated. An interview questionnaire was conducted for total 139 residents as POE. The use behavior and satisfaction for Jungja shelter space, were investigated. The statistical analysis were mean of satisfactions, reliability, factor analysis, and multiple regression analysis. The results and discussions can be objective data for rural village regeneration. In satisfaction level, 'Continuous use intention'(3.99), 'Well-suited approach'(3.87), and 'Helpful in resident living'(3.84) were shown to be high points of agreement in 5 point Likert type scale. But, the mean points were low as 2.01 in 'Surrounding landscape', 'Creation of green areas'(3.22), and 'Traffic safety'(3.22), respectively. Within use satisfaction, 5 factors were categorized, 'Use', 'Safety', 'Facility', 'Management' and 'Users'. By the result of multiple regression analysis, variables of 'Continuous use', 'Convenient location', and 'Image improvement', were shown to be main affecting variables to overall satisfaction. Furthermore, in spatial structure analysis, 4 types were categorized with the aspect of landform, roads, and location in village. The levels of satisfaction were shown to be high in village type of semi-open, road type of circular, and location type of center/back. Conclusively, these findings could be utilized as basic data and useful tool of space-structural satisfaction analytic method, and for each stage of planning/design and remodeling for rural village regeneration.