• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.80-86
• /
• 2013

In an effort to decrease aviation accident worldwide, development of aviation safety management has been sought through aviation index and standardization, both by establishing SMS(Safety Management System). It also needs to be done in the domestic. both study on SMS which ICAO recommends and setting the top priority safety goal, each differently classified by nations. Accordingly, defining safety index and developing continuous monitoring approach. Aircraft accident reporting system in Air Force does not operate in a open approach method due to its uniqueness related to mission achievement. Therefore, limits of utilizing the recent worldwide aircraft data sharing and analyzing results to prevent accident is inevitable. This paper introduces an overview of ECCAIRS 5 which become the standard for the recent worldwide aviation safety reporting and data exchange system. Also using ECCAIRS 5, aircraft accident cases of the Air Force are classified such as accident type, year, month, occurrence category, and flight phase. The result of the study will provide a guide line for utilizing the civil system in prevention of future military aviation accidents.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1430-1434
• /
• 2009

The present study used the liquid extraction pretreatment method and developed a liquid chromatographyultraviolet detector (LC-UV) for the simultaneous determination of 14 sulfonamides (SAs) residues in porcine and chicken muscle. Linearity within a range of $50-150\;{\mu}g/kg$ was obtained with the correlation coefficient ($r^2$) of 0.9673-0.9997. The mean recovery of SAs was 55.9-109.7% (relative standard deviations; RSDs 1.7-17.3%) in porcine muscle and 52.8-112.4% (RSDs 2.3-16.9%) in chicken muscle. The limits of detection (LODs) and limits of quantification (LOQs) were 2-32 and $7-96\;{\mu}g/kg$ in porcine muscle, and 4-32 and $13-97\;{\mu}g/kg$ in chicken muscle, respectively. These values were lower than the maximum residue limits (MRLs) established by the European Union. The sum of all SAs residues present should be less than $100\;{\mu}g/kg$.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2224-2228
• /
• 2012

This study describes the ability of capillary electrochromatography (CEC) for the determination of imidacloprid and carbendazim in tomato samples. A novel liquid crystal crown ether modified hybrid silica monolithic column was synthesized, characterized and developed as separation column for the first time. Baseline separation of imidacloprid and carbendazim could be achieved using a mobile phase containing 90% (v/v) 20 mmol/L phosphate buffer (pH 7.0) and 10% (v/v) acetonitrile. The matrix matched calibration curves were linear with correlation coefficient $r^2$ > 0.9998 in the range of 0.20-10.00 mg/L. The limits of detection for imidacloprid and carbendazim were 0.061 and 0.15 mg/kg, respectively, which were below the maximum residue limits established by the European Union as well as Codex Alimentarius. Average recoveries for imidacloprid and carbendazim varied from 101.6-108.0% with relative standard deviations lower than 6.3%. This method was applied to the analysis of tomatoes collected from local markets.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.4163-4183
• /
• 2021

As measures for protecting users and ensuring security of electronic financial transactions, such as online banking, financial institutions in South Korea have implemented network segregation policies. However, a revision of such domain-centered standardized network segregation policies has been increasingly requested because of: 1) increased demand for remote work due to changes resulting from COVID-19 pandemic; and 2) the difficulty of applying new technologies of fintech companies based on information and communications technologies (ICTs) such as cloud services. Therefore, in this study, problems of the remote work environment arising from the network segregation policy currently applied to the financial sector in South Korea and those from the application of new ICTs such as fintech technology have been investigated. In addition, internal network protection policies of foreign financial sectors, such as those of the United States, United Kingdom, European Union, and Russia, and internal network protection policies of non-financial sectors, such as control systems, have been analyzed. As measures for the effective improvement of the current network segregation policy, we propose a policy change from domain-based to data-centric network segregation. Furthermore, to resolve threats of hacking at remote work, recently emerging as a global problem due to COVID-19 pandemic, a standard model for remote work system development applicable to financial companies and a reinforced terminal security model are presented, and an alternative control method applicable when network segregation is not applied is proposed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.140-144
• /
• 2023

In recent years, there are so many serious crashes involving coaches, especially the frontal collision occupies 40% of the front of the vehicle, Frontal collisions account for 100% of the front of the vehicle affecting the driver and side-impact collisions that injure the person in the vehicle. Therefore, the research into improving and optimizing the structure is necessary for risk of injury for passengers in frontal accidents. In this paper, we have designed a Shock absorber that can absorb collision energy. Research using HYPERMESH software. to build the finite element model and calculate the meshing to suit the mesh size of 5mm. apply LS-DYNA software to calculate structural strength. In the study, for a vehicle to collide with a hard obstacle occupying 100% of the head of the vehicle. Then, the experimental design method, Minitab is used for find the structural parameters in the design. Improvement results showed that the acceleration of the impact on passengers and the driver is decreased by 55,17%. The mass of texture improvements is reduced by 11%, according to the requirements of European Standards ECE R94.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.89-98
• /
• 2023

Analytical methods for detecting atranol, chloroatranol, evernic acid, (+)-usnic acid, and atranorin in sanitary napkins and mouthwashes were developed using ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). UHPLC-MS/MS conditions were optimized for rapid, sensitive, and simultaneous analysis of the five allergenic compounds. The methods were validated by assessing their specificity, matrix effects, limit of detection (LOD), limit of quantification (LOQ), linearity, accuracy, and precision. Good linearity was achieved with a determination coefficient of ≥0.99. The LOD and LOQ were 2.1-9.8 and 6.4-29.6 ng/g for sanitary napkins and 0.29-0.48 and 0.87-1.45 ng/mL for mouthwashes, respectively. The accuracy and precision were within an acceptable range according to the criteria reported in the European SANTE/11813/2017 guidelines (70-120 % recovery, <20 % relative standard deviation). Therefore, these methods can be used to analyze atranol, chloroatranol, evernic acid, (+)-usnic acid, and atranorin in sanitary napkins and mouthwashes.

• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.143-148
• /
• 2018

Currently, the Korean Pharmacopoeia (KP XI) recommends HPLC and potentiometric titration (which is less specific than HPLC) for the determination of triflusal content in capsules and raw materials, respectively. Additionally, the British Pharmacopoeia (BP 2017) and European Pharmacopoeia (EP 8.0), which include a monograph for triflusal in raw materials only, describe a titration method for the assay. The latest version of the United States Pharmacopoeia (USP 39) and Japanese Pharmacopoeia (JP 17) still have not published monographs for triflusal and its preparations. To improve the specificity and efficacy of the assay, we present an HPLC method to determine triflusal content in both raw materials and capsules. The proposed method was validated in accordance with the requirements of the International Conference on Harmonization. A good linear relationship was achieved for triflusal in the range of $200-1250{\mu}g/mL$ with a coefficient of determination of approximately 0.9996. The relative standard deviations (RSDs) of inter- and intraday precision were 0.73-1.12 % and 0.34-0.51 %, respectively. The recovery percentage of triflusal was in the range of 98.80-101.31 %. Because its system suitability, intermediate precision, and robustness were satisfactory, this method could be suitable for determining triflusal content in raw materials and capsules.

• Journal of Service Research and Studies
• /
• v.8 no.1
• /
• pp.59-72
• /
• 2018

In the perspective of service, it is important to institute certification process required by International Standard Organization (ISO) for software (SW) development process, since Information and Communication Technology (ICT) takes high portion of the Korean industry and its certification for SW is essential internationally for trade. In addition, the certification service provided by BPMN tools like ADONIS is absolutely necessary. In that perspective, this paper proposes a new approach to satisfy this kind of necessity. This approach provides the certification service for the safety of SW required at the international level in Korean industry. Furthermore, the approach can be applied to other domains beside the SW. In order to demonstrate the approach, this paper shows how to guarantee service design for certification of ECSS-E-40 of European Space Agency (ESA) with ADONIS. This paper focuses on specification and verification of SW in E-40, and the main requirement for the verification will be safety of the SW.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2914-2922
• /
• 1997

For FA (factory automation) and ATE (automatic test equipment) in the industrial area, the standard bus needs to increase the system performance of multiprocessor environment. VME(versa module european package format) bus is appropriated to the standard bus but has features of small package and low board density. Beside, the density of board and semiconductor have grown to become significant issues that affect development time, project cost and field diagnostics. To fit this trend, in this paper, we composed Revision C.1 (IEEE std. P1014-1987) of the integrated environment for the main function such as arbitration, interrupt and interface between, VMEbus and several control modules Also the designed, VME system controller is implemented on FPGA that can be located even into slot 1. The control and function modules are coded with VHDL mid-fixed description method and then those operations are verified by simulation. As a result of experiment, we confirmed the most important that is the operation of Bus timer about Bus error signal should occur within $56{\mu}m$, and both control and function modules have the reciprocal operation correctly. Thus, the constructed VHDL library will be able to apply the system based VMEbus and ASIC design.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.253-261
• /
• 2018

In this paper, we study a method of designing a reflector for LED light sources with an asymmetric light distribution. In a sports game, lighting with a symmetric distribution makes the athlete and spectators look directly at the light source, so it can cause glare. We derive the optimal tilt angle and design a reflector with asymmetric light distribution to solve these problems. Afterward, performance is analyzed according to the tennis-court lighting standard, and is confirmed to meet the class 1 European standard.