• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.227-233
• /
• 2008

Recently, the transport quantity of goods between South and North Korea is rising rapidly by increasing of economical exchange between South and North Korea and growth of Gaeseoung industrial complex. In addition to a land transportation route, it is necessary to secure various logistics and transportation route for freight transportation between Incheon and Gaesung. In this paper, we investigated a construction of barge transportaion system between Incheon and Gaesung. The barge transportation system which has many merits such as a little initial investment and convenience of harbor loading/ unloading has been also used to transport freight widely in the EU and USA. Firstly, we investigated barge transport route, marine freight and barge fleet which consists of barge and pusher between Incheon and Gaesung. And next, we designed hull form and general arrangement of a barge and pusher based on shipping service condition, barge fleet, etc. Finally, a construction plans of barge transport system such as a operation of shipping service, berthing facilities, logistics center, intermodal transport are investigated.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.188-197
• /
• 2003

Endocrine disrupting chemicals (EDCs) can alter hormone regulation that control reproductive system in animals. The effects of endosulfan, molinate, and alachlor that suspected to have examined disruption EDCs effect on a fish species of interest, Xiphophorus helleri (swordtail fish), were studied using vitellogenin (Vtg) and aromatase as diagnostic biomarkers. Induction of Vtg proteins was detected by RT-PCR in male fish treated with alachlor, and mixture of endosulfan and molinate in dose response manner. Also, induction of aromatase was detected by RT-PCR in male fish treated with alachlor, endosulfan, and mixture of endosulfan and molinate in sinlilar manner. In this study, swordtail fish exposed to endosulfan or molinate individually did not show any adverse effects. However, Vtg and aromatase expressions and apoptosis were detected in swordtail. fish exposed to the mixture of endosulfan and molinate. These results suggested that low concentrations of mixture of molinate and endosulfan individually do not affect swordtail fish, but may influence genital system, and induce apoptosis.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.559-571
• /
• 2003

ENUM(tElephon NUmbering Mapping) is protocol that brings convergence between PSTN Networks and IP Networks using a unique worldwide E.164 telephone number as an identifier between different communication infrastructure. The mechanism provides a bridge between two completely different environments with E.164 number; IP based application services used in PSTN networks, and PSTN based application services used in IP networks. We propose a new way to organize and handle ENUM Tier 2 name servers to improve performance at the name resolution process in ENUM based application service. We build an ENUM based network model when NAPTR(Naming Authority PoinTeR) resource record is registered and managed by area code at the initial registration step. ENUM promises convenience and flexibility to both PSTN and IP users, yet there is no evidence how much patience is required when users decide to use ENUM instead of non-ENUM based applications. We have estimated ENUM response time, and proved how to improve performance up to 3 times when resources are managed by the proposed mechanism. The proposition of this thesis favorably influences users and helps to establish the policy for Tier 2 name server management.

• Journal of Nutrition and Health
• /
• v.38 no.6
• /
• pp.445-454
• /
• 2005

The purpose of this study was to compare the validity of obese index among body mass index (BMI), waist to hip ratio (WHR), and waist circumference (WC) and to determine which is the best in relation to cardiovascular disease (CVD) risk in Korean elderly more than 65 ages. Data from the 1998 Korean Health and Nutrition Survey were used (n=1017). Anthropometric indices and CVD risk factors were measured, and chi-square test, analysis of variance following duncan's multiple range test, partial correlation analysis, and Receiver Operator Characteristic (ROC) curves were used in the analysis. Anthropometric values were decreased in both male and female when ages were goes up. In female elderly, it specially showed the characteristics of upper body fat and systolic blood pressure risk (p<0.05). Among life style factors the current smokers were prevalent in obese male (p<0.05), but not prevalent in female having obese or upper body fat. Also, person with upper body obesity have more exercise than that of normal group (p<0.01). Mean BMI values of the current smoker was lower than that of normal group in both sexes (p<0.01). Mean BMI value of person with other risk factors were higher than that of normal groups (p<0.05). Among 7 CVD risk factors in partial correlation analysis, WC had the highest correlation coefficient in 5 in male, whereas BMI in 4 in female. In ROC analyses of 12 risk factors and health conditions, the largest area under curve of obese indices for risk factors were WC>WHR>BMI in male and BMI>WHR>WC in female. The optimal cutoff values of each index (BMI : WHR : WC) for one or more risk factors were 19.02 : 0.84 : 71.3 in male and 19.04 : 0.88 : 85.6 in female. In conclusion, Most Korean elderly showed non-obese and abdominal obesity likewise other Asians. Also CVD risk factors were prevalent in Korean elderly within normal limits of obese indices. Therefore the upper body fat indices reflected in the aged whose muscle mass is replaced by fat must be used as an indicator of CVD risk together with BMI. Although WHR was the worst index based on partial correlation analysis and so located between BMI and WC in ROC curve analysis in both sexes, it need to be use with WC to screen the cardiovascular risk group.

• Journal of Radiation Industry
• /
• v.5 no.1
• /
• pp.75-80
• /
• 2011

This study was to determine the microbiological safety and tensile strength of gammairradiated porcine tendon for the development of safe xenografts. Escherichia coli and Bacillus subtilis were used as model pathogens and inoculated as $10^6{\sim}10^7log$ colonies forming unit $(CFU)g^{-1}$. As model virus from porcine, porcine parvovirus (PPV), bovine viral diarrhoea virus (BVDV) and poliovirus were inoculated as $10^5{\sim}10^6$ tissue culture infectious dose $(TCID)_{50}g^{-1}$ into porcine skin. The $D_{10}$ value of E. coli and B. subtilis was measured as $0.32{\pm}0.082kGy$ and $4.0{\pm}0.312kGy$, respectively. Additionally, the $D_{10}$ values of PPV, BVDV and poliovirus were also shown as $1.75{\pm}0.131kGy$, $3.70{\pm}0.212kGy$ and $6.26{\pm}0.332kGy$, respectively. Gamma irradiation decreased the tensile strength of porcine tendon. Results indicate that microbiological safety of porcine tendon can be improved significantly by gamma irradiation. However, further studies are needed to improve the tensile strength of gamma-irradiated porcine tendon.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.606-615
• /
• 2018

Over the past two decades, the options for solid waste management have been changing from land disposal to recycling, waste-to-energy, and incineration due to growing attention for resource and energy recovery. In addition, the reduction of greenhouse gas (GHG) emission has become an issue of concern in the waste sector because such gases often released into the atmosphere during the waste management processes (e.g., biodegradation in landfills and combustion by incineration) can contribute to climate change. In this study, the emission and reduction rates of GHGs by the municipal solid waste (MSW) management options in D city have been studied for the years 1996-2016. The emissions and reduction rates were calculated according to the Intergovernmental Panel on Climate Change guidelines and the EU Prognos method, respectively. A dramatic decrease in the waste landfilled was observed between 1996 and 2004, after which its amount has been relatively constant. Waste recycling and incineration have been increased over the decades, leading to a peak in the GHG emissions from landfills of approximately $63,323tCO_2\;eq/yr$ in 2005, while the lowest value of $35,962tCO_2\;eq/yr$ was observed in 2016. In 2016, the estimated emission rate of GHGs from incineration was $59,199tCO_2\;eq/yr$. The reduction rate by material recycling was the highest ($-164,487tCO_2\;eq/yr$) in 2016, followed by the rates by heat recovery with incineration ($-59,242tCO_2\;eq/yr$) and landfill gas recovery ($-23,922tCO_2\;eq/yr$). Moreover, the cumulative GHG reduction rate between 1996 and 2016 was $-3.46MtCO_2\;eq$, implying a very positive impact on future $CO_2$ reduction achieved by waste recycling as well as heat recovery of incineration and landfill gas recovery. This study clearly demonstrates that improved MSW management systems are positive for GHGs reduction and energy savings. These results could help the waste management decision-makers supporting the MSW recycling and energy recovery policies as well as the climate change mitigation efforts at local government level.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.27 no.4
• /
• pp.76-86
• /
• 2014

Objective : This study was performed to find out the differential points of the pattern identification for Acne vulgaris and suggest them to the clinic setting Methods : We searched the papers that suggest patterns identification for Acne vulgaris through China National Knowledge Infrastructure(CNKI), Oriental Medicine Advanced Searching Integrated System(OASIS), Korean Traditional Knowledge Portal(KTKP), Korean Studies Information Service System(KISS). We looked through all the papers, excluded unintended papers, and finally chose some papers that are suitable for inclusion. Then, We extracted all the patterns of Acne vulgaris and chose frequently suggested patterns. Finally we extracted symptoms from selected patterns and arranged them in order of frequency. Results and Conclusions : 1. We found 215 papers and chose 17 papers (Korean : 6, Chinese : 11). 2. We extracted total 67 demonstrations and chose Patterns of Wind-Heat, Damp-Heat, Phlegm and Static blood, Disharmony of the Thoroughfare and Controlling vessels. 3. In Acne vulgaris, the pattern of Wind-Heat tends to have a red papule, sometimes pustule, pain with itching, burning sensation, tidal reddening of the cheeks, white head or black head. The pattern of Damp-Heat tends to have a pustule, node, redness and swelling, pain and greasy skin. The pattern of Phlegm and Static blood has a tendency to be a nodule or cystoma that is hard, dark, painful, long lasting and hard to recover and easy to recur with a scar, pimple, pigmentation. The pattern of Disharmony of the Thoroughfare and Controlling vessels tends to be exacerbated before menstruation, have a small papule that is not easily treated under the chin or around the mouth.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.589-599
• /
• 2021

Purpose: A reliable indicator of congested traffic speed is essential in providing the information of traffic flow states about motorway sections. The aim of this study is to propose an adaptive indicator of congested speed which is employed for deciding the traffic flow states for individual motorway sections using disaggregated section-based speed data. Method: Typically, the state of traffic flow is categorized into the three: uncongested, mixed, congested states. A method, presented in this study, was developed for identifying boundary speed values of road sections through categorizing the three traffic flow states with individual vehicular speed values. The boundary speed state of each road segment is determined using the speed distributions of mixed and congested traffic states. Result: Analysis results revealed that boundary speed values between mixed and congested states for road sections were similar to those of US and EU criteria (i.e., 48.28~66.0 kph). This indicates that boundary speed values could be different according to road sections. Conclusion: It is expected that the method and indicator, proposed in this study, could be efficaciously used for providing ad-hoc real-time traffic states and computing traffic congestion costs for motorway sections in the era of big data.

• International Area Studies Review
• /
• v.15 no.2
• /
• pp.427-447
• /
• 2011

In global, there is an active movement to reduce the green house gas. Allowance and carbon tax are the one of effective alternatives to mitigate green gas effect. In addition, the clean development machinism(CDM) can be applied between the ANNEX 1 and developing countries. It could be an one good solution to reduce the GHG. In the Northern Asia, the CDM can be the one of the possible solution to reduce the GHG because the Japan has a responsibility to reduce GHG and the China and Korea have a room to supply CDM credit. It is suffice to say that if these three countries decide to collaborate, the new international carbon market can be established that can be the similar form of EU-ETS. It is clear that few barriers must be removed to launched such new form of carbon market. Protection of domestic technology, excessive financial request of business opportunities by CDM, and irrational needs of carbon credit that created by CDM, listed constraints define as an one single word, the national selfishness. Once it is cleared, there is high possibility that the Northern Asia CDM trading system can be launched.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.164-173
• /
• 2019

The purpose of this research was to introduce a network analysis method for analyzing technology trends in the aerospace industry at the Farnborough International Airshow (FIA), one of the world's three major airshows. Civil and defense companies and government and military officials from 112 countries and 1,500 agencies convened at FIA 2018 to share and explore recent trends in the aerospace industry. We studied aerospace technologies from 45 countries, 1,108 exhibiters, and 223 technology categories via centrality analysis. The results from the network analysis showed that machining is the center of aerospace technology. However, there were quite different tendencies, depending on the region and country. The centers of aerospace technology are machining in Europe and the United Kingdom, aircraft components in Asia, and engine components/controls in the United States. In Korea, no one key technology was recognized, due to the country's small attendance. We hope this research will be conducive to aerospace technology-and-research planning, and that it will be an appropriate tool to help domestic manufacturers boost their exports.