• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.233-238
• /
• 2009

The advances in the digital communication and network technology, Internet technology and the proliferation of smart appliances in home, have dramatically increased the need for a high speed/high quality home network. As consumer electronic devices and computing devices are increasing in the home network, it is obvious that the data traffic of home network increases as well. Various home network devices want to access Internet servers to get multimedia contents. Therefore, we introduce TLC(Telephone Line Carrier) system for networked digital consumer electronic appliances within a house using Ethernet or wire/wireless technology. In the future home network environment, the primary purposes of the smart home network based TLC are to create low-cost, easily deployable, high performance, and wide coverage throughout the home. In this paper, the channel capacity of telephone line communication system is evaluated and compared as a function of transmission power, number of OFDM carrier, channel loss, and noise loss for smart home network.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.24-33
• /
• 2011

This paper describes a gateway system based on a MOST network for integrating several different automotive network protocols. For transparent data communication among different protocols regardless of the high-level messages and the data format, Pseudo MOST frame was designed based on MOST frame and this pseudo MOST data frame is used as the data carrier. For automotive application, two types of gateways were developed, one board-type gateway and small-sized module-type gateways. One board-type gateway has ethernet port, video port and audio port. Meanwhile, small-sized module-type gateways are developed for video, audio, bluetooth and Flexray, respectively. Experiments with a network system using several small-sized module gateways verified efficient data communication among different network protocols and confirmed the effectiveness of the proposed gateway system for automotive network integration.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.121-126
• /
• 2018

IEEE 802.1 TSN TG is developing standards for end-to-end delay bounds and zero packet loss based on Ethernet technology. We focus on packet forwarding techniques. TSN packet forwarding techniques can be classified into Synchronous and Asynchronous framework. Synchronous approach allocates fixed time period for a class, yet is complex for large networks. Asynchronous approach provides delay guarantee by regulator-scheduler pair, yet is unnecessarily complex, too. We propose network components for TSN Asynchronous architecture, which remove the complexity of maintaining flow state for regulation decisions. Despite such a simplicity, the proposed architecture satisfies the TSN's delay requirements provided the limited high priority traffic's maximum packet length.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.15-21
• /
• 2009

An Ethernet passive optical network (EPON) is an economical and efficient access network that received significant research attention in recent year. A MAC protocol of the PON, the next generation access network, is based primarily on TDMA (Time Division Multiple Access). In this paper, we addressed the problems of a dynamic bandwidth allocation (DBA) in Fairness and QoS Performance. We augmented the advanced bandwidth allocation algorithms to support efficient resource utilization by reducing the unused remaining bandwidth made by idle state ONUs. Our new proposed advanced bandwidth allocation algorithm can allocate effectively and fairly the bandwidths between end-users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1346-1363
• /
• 1994

Packet voice protocols have been realized in many research works. But few studies for the interconnection of LAN and PABX to facilitate the voice communication have been done. In this paper, the gateway to interconnect the Ethernet LAN with the existing PABX telephone network for voice communication has been designed and implemented. The implemented gateway protocol is a modified protocol based on CCITT`s G.764 packetized voice protocol. To accomplish this goal the hardware system has been realized, which is divided into five parts: interface part with the telephone line, voice-processing part, PC interface part, controller part, and finally DTMF part. And the gateway software is divided into three parts: interface to make use of the packet driver which drives the network card, driver to drive the PABX gateway, and the protocol handling part.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.53-60
• /
• 1998

Efficiency of design process for large scale structures highly depends on the development of efficient structural analysis and structural response control algorithms because a successful design involves a number of structural analysis based on iterative structural response control process. In this paper, distributed structural analysis model on multiple personal computers connected by ethernet network is presented. To reduce communication cost required in the process of analysis, substructuring techniques are adopted to evenly distribute computational loads on each processor. With its applications on structural analysis of plane frame structures, performance of the proposed computational model are presented in detail.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.166-171
• /
• 2015

Recently, the international standard RS-422 serial communication, which was primarily designed for the communications between micro-controllers, has been used as a communication method on the ship. However, as the NMEA (National Marine Electronics Association) 2000 standardization progresses recently, a high-speed Ethernet-based communication environment is expected to be an alternative communication method instead of the RS-422 gradually. In addition, the ship's main instrumentation equipment with versatility and convenience is implemented to control devices as monitoring and controlling tools. This paper describes an implementation of wireless ultrasonic anemometer and anemoscope data processing and logger system using PC network, where the control processing equipment such as a separate operational console, data-logger, and indicator is required for the system. For these, the related element technologies to implement ultrasonic anemometer and anemoscope data processing system are expressed as a functional modules, and the NMEA 2000 standard certified data-logger system is implemented without the separate operational console.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.49-52
• /
• 1994

We have developed a biological signal measurement, archiving, and communication system (SiMACS). The front end of the system is the intelligent data processing unit (IDPU) which includes ECG, EEG, EMG, blood pressure, respiration, temperature measurement modules, module control and data acquisition unit, real-time display and signal processing unit. IDPUS are connected to central data base unit through LAN(Ethernet). Workstations which receive signals from central DB and provide various signal analysis tools are also connected to the network. The developed PC-based SiMACS is described.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.11-16
• /
• 2023

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, without operating system, we have implemented an EtherCAT master with an open source EtherCAT master stack SOEM on STM32 Nucleo-144 board with an STM32F767 microcontroller. And its jitter performance has been evaluated at the output of the network port to include all the effects of the entire system in the results. The results show that the implemented EtherCAT master has precise control performance for control frequencies from 1KHz to 8KHz and relatively superior jitter performance compared to the EtherCAT masters with real-time patched Linux operating system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1205-1210
• /
• 2004

The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.