• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.51-56
• /
• 2014

High-availability seamless redundancy (HSR) is a protocol for fault-tolerant Ethernet (FTE) networks. It provides two frame copies and each copy is forwarded on a separate physical path, which provides zero fail-over time. Therefore, the HSR is becoming a potential candidate for various real-time FTE applications. However, the generation and circulation of unnecessary frames due to the duplication of every sending frame is inherent drawback of HSR. Such drawback degrades the performance of the network and may deplete its resources. In this paper, we present a new algorithm called port locking (PL) based on the media access control (MAC) address to solve the abovementioned problem in popular connected-rings network. Our approach makes the network gradually learn the locations of the source and the destination nodes without relying on network control frames. It then prunes all the rings that do not contain the destination node by locking corresponding rings' entrance ports. With the PL algorithm, the traffic can be significantly reduced and therefore the network performance will be greatly enhanced specially in a large scale connected-rings network. Analytical results are provided to validate the PL algorithm.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.319-326
• /
• 2004

To help network intrusion detection systems(NIDSs) keep up with the demands of today's networks, that we the increasing network throughput and amount of attacks, a radical new approach in hardware and software system architecture is required. In this paper, we propose a Network Processor(NP) based In-Line mode NIDS that supports the packet payload inspection detecting the malicious behaviors, as well as the packet filtering and the traffic metering. In particular, we separate the filtering and metering functions from the deep packet inspection function using two-level searching scheme, thus the complicated and time-consuming operation of the deep packet inspection function does not hinder or flop the basic operations of the In-line mode system. From a proto-type NP-based NIDS implemented at a PC platform with an x86 processor running Linux, two Gigabit Ethernet ports, and 2.5Gbps Agere PayloadPlus(APP) NP solution, the experiment results show that our proposed scheme can reliably filter and meter the full traffic of two gigabit ports at the first level even though it can inspect the packet payload up to 320 Mbps in real-time at the second level, which can be compared to the performance of general-purpose processor based Inspection. However, the simulation results show that the deep packet searching is also possible up to 2Gbps in wire speed when we adopt 10Gbps APP solution.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.123-126
• /
• 2006

멀티미디어 홈 네트워크 환경을 위해서는 A/V(Audio/Video)데이터의 실시간 전송에 유리한 IEEE1394 네트워크와 이동성을 편리하게 지원하고, 홈 외부로의 전송에 적합한 이더넷의 상호 연동 서비스가 필요하다. 따라서 본 논문은 가정내의 IEEE1394 기반 A/V 장치에서 홈 내부 및 외부의 이더넷 기반 모바일 장치로 멀티미디어 데이터를 전송하고, 인터넷의 멀티미디어 데이터를 IEEE1394 기반 A/V 장치로 전송하는 홈 게이트웨이의 구조를 제안한다. 멀티미디어 데이터의 실시간 전송을 위해 DV to MPEG4 트랜스코더를 DV, MPEG4 코덱을 통해 구현하였고, IEEE1394 네트워크와 이더넷 사이의 멀티미디어 데이터 전송 및 제어를 위해 스트리밍 서버와 MPEG4 코덱을 내장한 클라이언트, 그리고 IEC61883 규격을 이용한 IEEE1394 장치 제어 모듈을 제작하였다.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.293-295
• /
• 2006

철도 신호제어시스템은 철도의 선로변에 위치하면서 열차의 안전운행을 책임지는 매우 중대한 시스템이다. 이러한 신호제어장치들은 각자의 고유의 기능을 수행하면서 다른 제어장치들과 링크되어 하나의 신호제어시스템으로 구성되어진다. 요즘 철도신호시스템에 사용되는 각 장치들이 전자화되어감에 따라 철도신호장치들간 정보전송을 위한 네트워크에 대한 중요성이 증대되었다. 철도신호시스템과 같은 고신뢰성이 요구되는 시스템에서 실시간 요구조건과 신뢰도를 만족시킬 수 있는 네트워크 기술에 대한 필요성 또한 증대되고 있다. 가장 널리 쓰이는 기술인 이더넷은 프로토콜 자체의 랜덤 특성으로 인해 실시간 요구사항을 만족하지 못하였으나 최근 들어 스위치드 이더넷으로 진화하면서 산업용 제어시스템에 이더넷 기술이 적용되고 있다. 본 논문에서는 이러한 스위치드 이더넷의 이론적 해석을 통해 철도신호시스템에 적용 가능성을 확인하였고, 네트워크에 결함발생 시 결함검지 및 회복 알고리즘이 포함된 높은 신뢰성을 가진 이더넷 기반 네트워크 알고리즘과 모의시험을 통한 그 성능을 분석하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.166-171
• /
• 2015

Recently, the international standard RS-422 serial communication, which was primarily designed for the communications between micro-controllers, has been used as a communication method on the ship. However, as the NMEA (National Marine Electronics Association) 2000 standardization progresses recently, a high-speed Ethernet-based communication environment is expected to be an alternative communication method instead of the RS-422 gradually. In addition, the ship's main instrumentation equipment with versatility and convenience is implemented to control devices as monitoring and controlling tools. This paper describes an implementation of wireless ultrasonic anemometer and anemoscope data processing and logger system using PC network, where the control processing equipment such as a separate operational console, data-logger, and indicator is required for the system. For these, the related element technologies to implement ultrasonic anemometer and anemoscope data processing system are expressed as a functional modules, and the NMEA 2000 standard certified data-logger system is implemented without the separate operational console.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.5
• /
• pp.434-437
• /
• 2002

A small size and light-weight DSP board is newly designed for a real time multi-distributed control system that overcomes constraints on time and space. There are a variety of protocols for a real-time distributed control system. In this research, we selected CAN for the multi distributed control, which was developed by the BOSCH in the early 1980's. If CAN and Internet are connected together, the system attains the characteristics of a distributed control system and a remote control system simultaneously. To build such a system. The TCP/IP-CAN Gateway which converts a CAN protocol to TCP/IP protocol and vice verse, was designed. Moreover, the system is required to be small and light-weighted for the high mobility and cost effectiveness. The equipment in remote place has a TCP/IP-CAN Gateway on itself to be able to communicate with another systems. The received commands in the remote site are converted from TCP/IP protocol to CAN protocol by the TCP/IP-CAN Gateway in real time. A simulation system consists of a TCP/IP-CAN Gateway in remote place and a command PC to be connected to Ethernet.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1183-1190
• /
• 2005

This paper presents a dynamic model of railway vehicle for the development of a 6-axis tilting train simulator. The tilting train simulator will be used to verify the tilting electronics and tilting control algorithm that are to be applied to the Korean tilting train. The tilting train simulator is composed of 6 electric-driven actuators, a track generation system, a graphic user interface, and a visualization system with a 1600mm-diameter dome screen. The each system shares the data by means of ethernet network in realtime. In this study, a train model of 9-DOF with a force generation system to tilt train body has been developed. The dynamic analysis for the straight track running and curve negotiation of a railway vehicle can be performed in the model. In this study, a verification study for the application of the model to the simulator has been conducted under curving situation on the track with different radii.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.586-589
• /
• 2017

The vibration monitoring system using the sensor network is used in various fields. However, in case of the vibration of the existing products, the size of the monitoring system is increased due to the separation of the sensor data collection function and the communication function. In this paper, we design and implement a lightweight vibration monitoring system using the MQTT protocol, which is oneM2M device standard protocol for the Arduino and Ethernet modules, to monitor frequent earthquakes and vibrations in narrow places.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.18-29
• /
• 2016

In this paper, we discuss the issues of providing protection for point-to-multipoint connections in both Ethernet and MPLS-TP-based packet transport networks. We introduce two types of per-leaf protection-linear and ring. Neither of the two types requires that modifications to existing standards be made. Their performances can be improved by a collective signal fail mechanism proposed in this paper. In addition, two schemes - tree protection and hybrid protection - are newly proposed to reduce the service recovery time when a single failure leads to multiple signal fail events, which in turn places a significant amount of processing burden upon a root node. The behavior of the tree protection protocol is designed with minimal modifications to existing standards. The hybrid protection scheme is devised to maximize the benefits of per-leaf protection and tree protection. To observe how well each scheme achieves an efficient traffic recovery, we evaluate their performances using a test bed as well as computer simulation based on the formulae found in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.53-59
• /
• 2011

In this paper, the implementation of a production control system has been studied in order to obtain Realtime Cost Calculation using an exact Machine Factor and Man Factor based on RFID reader data transferred through network. For the study, microprocessor built in the controller of production facilities is used and also RFID reader is built additionally. Control part, card reader used for check the beginning and ending working time of workers, and Machine Factor and Man Factor calculated are transferred to server via PLC transmission port, serial transmission port, or Ethernet transmission port. By using the system, the production cost or the production efficiency is calculated exactly. Therefore it is possible to improve production rate and cost reduction by the use of the proposed production control system.