• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1168-1173
• /
• 2012

In this paper, we propose a protection architecture of passive optical network (PON) system by using two optical line terminals (OLTs). Using this scheme, the network can sustain services to access area and restores normal operation in faulty conditions. Unlike existing systems, the proposed one increases the efficiency of the system by operating both OLTs using different wavelengths in normal condition. During protection mode, a Shared-bandwidth allocation scheme is employed to maximize the utilization efficiency. Performance analysis shows that the proposed scheme can provide reliability to Ethernet-based PON system very efficiently.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.101-105
• /
• 2013

This paper addresses QoS functions in mobile backhaul network to accommodate the diverse traffics in cell site. The traffics assigned to the switching function in RAN system, such as Ethernet frame, IP packet, and ATM cell, are segmented, and then encapsulated to transfer then to the mobile backhaul network. ISP can converge all generation traffics, such as voice, HSPA, over all-IP RAN through standard pseudowire encapsulation. These can be enhanced with diverse QoS methods as well as comprehensive monitoring and diagnostic capabilities. Therefore in this paper, QoS functions under theses operations is simulated according to the encapsulation functions.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.352-360
• /
• 2012

This paper proposes a low-cost, low-power, and high-capacity optical-electrical-optical-type reach extender that can provide 3R frame regeneration and remote management to increase the reach and split ratio with no change to a legacy time division multiple access passive optical network. To provide remote management, the extender gathers information regarding optical transceivers and link status per port and then transmits to a service provider using a simple network management protocol agent. The extender can also apply to an Ethernet passive optical network (E-PON) or a gigabit-capable PON (G-PON) by remote control. In a G-PON, in particular, it can provide burst mode signal retiming and burst-to-continuous mode conversion at the upstream path through a G-PON transmission convergence frame adaptor. Our proposed reach extender is based on the quad-port architecture for cost-effective design and can accommodate both the physical reach of 60 km and the 512 split ratios in a G-PON and the physical reach of 80 km and the 256 split ratios in an E-PON.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.557-558
• /
• 2007

변화, 발전하는 IT기술과 디지털 기술, 그리고 네트워킹 기술 등에 따라 변전소의 운용 및 자동화 부문에 있어서도 적지 않은 변화가 일어나고 있다. 변전소의 건설 및 운용 면에 있어서도 예외가 아니며, 관련된 관심 사항으로는 시스템 구축 및 운용 시의 경제적인 측면, 시스템의 신뢰성, 그리고 유지보수 및 설비 관리의 효율성 등을 언급할 수 있다. 최근의 기술 추세는 Ethernet 통신 기반의 Network Device를 근간으로 하는 시스템으로의 변신을 주장하고 있으며, 세계 유수의 전력 설비 Maker에서도 이에 부응하기 위한 Network Device를 개발, 출시하고 있는 실정이다. 당소에서도 이와 같은 기술 추세에 부응하여 소위 미래형 변전소에서 요구되는 각종 ND의 개발을 추진하고 있으며, 그 첫번째 결과물로 154kV GIS의 운용 시에 요구되는 각종 제어 및 감시를 위한 Digital Control Unit(이하 DCU)을 개발하였다. 두 번째로 이와 같은 DCU와 연계하여 기존의 Remote Control 기능을 구비하고 상위시스템과 연결되며 변전실내에서 운용되는 Remote Control Unit(이하 RCU)을 개발하였다. 마지막으로 예방진단 시스템과 관련하여 주요 전력 설비의 상태 정보를 취합하는 Serial 통신 기반의 Static Type의 Diagnostic Analysis Unit(이하 DAU)을 하나의 Network Device로 개발함으로써 감시, 진단, 제어 등의 요구기능이 일체화 된 네트워크 기반의 미래형 변전소 자동화 시스템 구축에 한걸음 다가가는 기반을 마련하였다.

• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.46-49
• /
• 2011

This paper is to implement MoIP platform to send and receive video and audio at the same time by using high-performance Dual Core Processor. Even if Wall-Pad key component of a home network system is released by using embedded processors, it's lacking of performance in terms of multimedia processing and feature of video telephony through which video and voice are exchanged simultaneously. The main reason could be that embedded processors currently being used do not provide enough performance to support both MoIP call features and various home network features simultaneously. In order to solve these problems, Dual processor could be used, but in the other hands it brings another disadvantage of high cost. Therefore, this study is to solve the home automation features and video telephony features by using Dual Core Processor based on ARM 11 Processor and implement the MoIP Wall-Pad which can reduce the board design costs and component costs, and improve performance. The platform designed and implemented in this paper verified performance of MoIP to exchange the video and voice at the same time under the situation of Ethernet network.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.801-808
• /
• 2018

The performance test methodology for switch, router or integrated networks that make up the wired network is not clearly defined. Due to smart phones and multimedia traffic, the speed of the network is rapidly increasing to 100Gbps. However, there is no formalized test method, and performance test related parts are still being tested based on old data. Telecommunication companies and companies are testing their requirements in their own BMT, and government or public institutions are requesting performance tests from external organizations. As the demand for the performance test of next generation network equipments and the integrated network increases, analysis of the performance test method should be done as soon as possible. Therefore, in this paper, we analyze the performance test method performed by the institute and propose guidelines that can be applied to all wired network equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.23-29
• /
• 2009

This paper presents the development of embedded network educational system. This is an educational equipment which enables user to have training over Network Configuration and Embedded network programming practice on Internet environment. The network education system is developed on embedded environment. based on using ethernet interface. On the development environment. PAX255 VLSI chip is used for the processor, the ADSv1.2 for debugging, uC/OS276 for RTOS. The system software was developed using C language. The ping program provided an educational environment for the student to compile and load it to run after doing practice of demonstration behavior. Afterwards programming procedure starts the step-by-step training just like the demonstration function. In other words, programming method how to design the procedure of ARP operation and ICMP operation is explained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.311-318
• /
• 2016

Recent vehicles are using car internal network for various purposes such as vehicle control, diagnostic functions, and ECU program upgrade. Currently CAN and FlexRay are the most representative networks. In the next-generation network, the use of CAN FD and car ethernet is actively studied. In this paper, we aimed to compare and evaluate the diagnostic function and the program of the ECU from the upgrade view on characteristics related to download time for each network when CAN, CAN FD, and FlexRay network are applied. As a result of the simulation, it was possible to determine that the CAN FD network is currently the most suitable for the next-generation network by suppressing other networks in terms of cost performance even under conditions of 500 Kbps and 2 Mbps which are practically usable speeds.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1059-1067
• /
• 2006

AODV(Ad-hoc On-demand Distance Vector) routing protocol was devised for use of mobile nodes in Ad-hoc network. When we use the AODV routing protocol in Ad-hoc networks with high mobility, disturbance of optimized route path and link break occur. In order to solve the shortcomings, this paper proposes a new routing protocol in which new routing control messages are added to the existing AODV. The proposed protocol minimizes link break and transmission delay while is able to secure the optimized route path constantly in changes of network topology The performance of the proposed routing protocol was evaluated by using us2 network simulator. The actual Ad-hoc network test bed provides us the most reliable experimental data for Ad-hoc networks. In order to support this experimental environment, the dissertation also developed an efficient embedded system on which AODV routing protocol, NAT, Netfilter can run and other event message can be verified without declining efficiency. The correct operation of AODV routing protocol has been verified in both the Ad-hoc network test bed in which the embedded system was used, and Ad-hoc networks linked with Ethernet backbone network.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.539-544
• /
• 2020

The research is on progressing to operate digital door lock with the method to guarantee the security and safety in the meantime to use digital door lock conveniently using Internet of Things (IoT) standardizing various service providing technology using IoT in home network currently. In this study, compose home network interconnecting Raspberry-PI and web server reflection this trend and composed the system to control the door lock after connect Arduino substituting converter function. Making Raspberry-PI using dynamic IP address using existing open source easily maintain DNS information and possible to connect internet network in home network ethernet and finally, making the smartphone can control door lock remotely entering designated address after connect the internet. The connection between home network and Arduino is executed by Raspberry-PI and bluetooth pairing as 1:1 and make random user's access to be impossible. Especially, to make open/close the door lock with smartphone not by using password on the keypad or using RFID card is judged as the method increasing the security make random user's access to be impossible and also increased the usefulness making remote control to be possible.