• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.45-52
• /
• 2002

This paper presents fault detection scheme of Brushless DC(BLDC) motor drive system by estimating BLDC motor resistance using motor input and output data which is transmitted from data acquisition board to host computer over serial communication channel. Since communication time delay has a serious effect on performance, we use periodic and fixed communication protocol. Hence, the delay time is priory known. Simplified BLDC motor model and recursive least square algorithm is used for estimating motor resistance. By experiment result, we confirm the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.85-95
• /
• 1995

The error intensity models for the ML estimation of a signal parameter have been developed in a companion paper [1]. While the methods described in [1] are applicable to any estimation problem with continuous parameters, our main application in this paper is the time delay estimation, and comparisons among the models derived in [1] (i.e. LC, LM, and ALM models)have been made. We first consider the case where only additive Gaussian noise is involved, and then the shot noise environment where coherent impulsive noise is also involved in addition to the Gaussian noise. We compare the models in terms of the probability of error, MSE(Mean Squared Error), and the computational complexity, which are the most important performance criteria in the analysis of parameter estimation. In conclusion, the ALM model turned out to be the most adequate model of all from the viewpoints of the criteria mentioned above.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1294-1297
• /
• 2003

With the development of medical field, many kinds of operations have been performed on human articulation. Arthroscopic surgery, which has Irrigation Pumping System for security of operator vision and washing spaces of operation, has been used for more merits than others. In this paper, it is presented that the research on a reliable control algorithm of the pumping system instrument for arthroscopic surgery. Before clinical operation, the flexible artificial articulation model is used for realizing the model the most same as human's and the algorithm has been exploited for it. This system is considered of the following; limited sensing point, dynamic effect by compliance, time delay by fluid flow and so on. The system is composed with a pressure controller, a regulator for keeping air pressure, an airtight tank that can have distilled water packs, artificial articulation and a measuring system, and has controlled by the feedback of pressure sensor on the artificial articulation. Also the system has applied to Smith Predictor for time delay and the parameter estimation method for the most suitable system with both the experiment data and modeling. In this paper, the pressure error that is between an air pressure tank and an artificial articulation was measured so that the system could be presumed and then the controller had developed for performing State-Feedback. Finally, the controller with a real microprocessor has realized. The confidence of system can be proved by applying this control algorithm to an artificial articulation experiment material.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.607-614
• /
• 1999

This paper deals with the design problem of the state estimator for servo system. The servo system has input time delay which depends on the computational time of control algorithm. The delayed input is a factor that brings out the state estimation error. So in order to reduce the state estimation error of the system, we propose a state estimator in which the delayed input of the system is considered. For this purpose, discrete time state space model is established accounting for the delayed input and a state estimator is designed based on this model. Kalman filter algorithm is employed in the design of the state estimator. The proposed estimator is used in the speed control of servo system with delayed input. Performance of the proposed state estimator is exemplified via simulations and experiments for servo system. Also, robustness of the proposed estimator to modeling error by variation of the system parameters is also shown in simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.480-483
• /
• 1995

Identification of a process in closed-loop control system is an important problem in practice. This paper deals with parameter estimation using input-output data of the process operating in a closed-loop system. It is necessary to determine orders and delay-time to get consistent estimators by least square method for input-output data collected from the process. The authors considered a problem to determine delay-time in the condition that orders were known, in last KACC. So we extend the range to determine orders and delay-time in this paper.

• The KIPS Transactions:PartA
• /
• v.17A no.1
• /
• pp.27-32
• /
• 2010

Logical Effort is a simple hand-calculated method that measures quick delay estimation. It has the advantage of reducing the design cycle time. However, it has shortcomings in designing a path for minimum area or power under a fixed-delay constraint. In this paper, we propose an equal delay model and, based on this, a method of optimizing power-delay efficiency in a logical path. We simulate three designs of an eight-input AND gate using our technique. Our results show about 40% greater efficiency in power dissipation than those of Logical Effort method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.1
• /
• pp.24-32
• /
• 2003

The PID controller has been widely used in industrial applications due to its simple structure and robustness. Even if it is initially well tuned, the PID controller must be retuned to maintain acceptable performance when there are system parameter changes due to the change of operation conditions. In this paper, a self-tuning control scheme which comprises a parameter estimator, a NN-based rule emulator and a PID controller is proposed, which can cope with changing environments. This method involves combining neural networks and real-coded genetic algorithms(RCGAs) with conventional approaches to provide a stable and satisfactory response. A RCGA-based parameter estimation method is first described to obtain the first-order with time delay model from over-damped high-order systems. Then, a set of optimum PID parameters are calculated based on the estimated model such that they cover the entire spectrum of system operations and an optimum tuning rule is trained with a BP-based neural network. A set of simulation works on systems with time delay are carried out to demonstrate the effectiveness of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.49-54
• /
• 2004

In process control, PPl controller including smith predictor was proposed for efficient control method because of the weak performance by the effect of long dead-time. But PPI controller can not guarantee of control performance at real plant because of sensitivity to model mismatch. Thus, In this paper, we presented new control parameter estimation strategy for compensating of model mismatch. The proposed startegy obtained useful result through various cases.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.1
• /
• pp.20-25
• /
• 2019

To prepare for the ever-increasing demand for air transport, airport operators should be well aware of the timing of the saturation of the facility and increase the capacity of the airport through extension or extension. The capacity of an airport is determined by the smallest value of the facilities that make up the airport, but it is generally customary to determine the capacity of the costly and time-consuming runway as a whole for the airport. For analyzing the capacity of the runway capacity, the study used the most accurate microscopic air traffic simulation, Simmod-PRO, to analyze the saturation time of three runways currently in Incheon International Airport's operation, and calculate the appropriate time for operation of the 4th runway. The study also calculate the relocation of Airport's high-speed exit taxiway for analyzing the increasing of capacity.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.746-753
• /
• 2008

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.