• Title/Summary/Keyword: Estimated equation

Search Result 1,947, Processing Time 0.026 seconds

Chromosomal Aberrations Induced in Human Lymphocytes by in vitro Irradiation with $^{60}Co\;{\gamma}-rays$ (체외 방사선조사시 인체 말초혈액 임파구의 염색체이상 빈도에 관한 연구)

  • Ahn, Yong-Chan;Ha, Sung-Whan
    • Journal of Radiation Protection and Research
    • /
    • v.18 no.2
    • /
    • pp.1-16
    • /
    • 1993
  • As guides to decision-making in the management of the victims in case of acute whole body or partial body radiation exposure, we studied the relationship between radiation dose and the frequency of chromosomal aberrations observed in peripheral lymphocytes that were irradiated in vitro with $^{60}Co\;{\gamma}-rays$ at doses ranging from 2Gy to 12Gy. The yields of cells with unstable chromosomal aberrations (dicentric chromosomes, ring chromosomes, and acentric fragment pairs) were 32% at 2Gy, 47% at 4Gy, 80% at 6Gy, 94% at 8Gy, and 100% at 10Gy and over. Ydr, which reflect average dose to the whole body in case of acute whole body exposure, were 1.373 at 2Gy, 0.669 at 4Gy, 1.734 at 6Gy, 2.773 at 8Gy, 3.746 at 10Gy and 5.454 at 12Gy. The relationship between radiation dose (D) and the frequency of dicentric plus ring chromosomes per cell(Ydr) could be expressed as $Ydr=9.322{\times}10^{-2}/Gy {\times}D+2.975{\times}10^{-2}/Gy^2{\times}D^2$. Qdr, which are used in estimating dose of partial body exposure and dose of past exposure, were 1.166 at 2Gy, 1.436 at 4Gy, 2.173 at 6Gy, 2.945 at 8Gy, 3.746 at 10Gy and 5.454 at 12Gy. To see how confidently this dosimetry system may be used, we obtained Qdr values from those who received one fraction of homogenous partial body irradiation of 1.BGy, 2.5Gy, and 7.OGy therapeutically; in vivo Qdr values were 1.109, 1.222 and 2.222 respectively. The estimated doses calculated from these in vivo Qdr values using the equation $Qdr=Ydr/(1- e^{-Ydr})$ were 1.52Gy, 2.48Gy, and 6.54Gy respectively, which were very close to the doses actually given.

  • PDF

A Study on the Determination of the Maintenance Energy Requirement in Growing Goats (육성기 염소의 유지에너지 요구량 결정연구)

  • Chung, Sang Uk;Zhang, Qi-Man;Jang, Se Young;Yun, Yeong Sik;Moon, Sang Ho
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.40 no.2
    • /
    • pp.111-116
    • /
    • 2020
  • This study was conducted to determine the maintenance energy requirements of growing goats in order to establish an appropriate energy benefit system, to reduce feed costs and improve livestock productivity of goat farmers, and to present basic data for detailed specifications afterwards. This experiment was conducted as a group specification test for a total of 3 months, with 32 goats of three months age and conducted by four treatments with different energy levels (T1: NRC+0%, T2: NRC+10%, T3: NRC+20%, and T4: NRC+30%). The average daily gain was the highest in the treated with NRC + 10% of the energy level of the experimental diet, and the feed conversion ratio was in the range of 6.3 g to 7.3 g in the group feeding experiment. Although there was no significant difference in digestibility between treatments, the digestibility of dry matter, crude protein, and crude fat was higher in T2 treated with NRC + 10% than the other treatments. Through the regression equation of the values of MEI and ADG obtained through the experiment (Y=0.5439X+111.51, R2=0.712), the maintenance energy requirement of the goat in the growing period was estimated to be 111.51 kcal/kgBW0.75.

Population Phenology and an Early Season Adult Emergence model of Pumpkin Fruit Fly, Bactrocera depressa (Diptera: Tephritidae) (호박과실파리 발생생태 및 계절초기 성충우화시기 예찰 모형)

  • Kang, Taek-Jun;Jeon, Heung-Yong;Kim, Hyeong-Hwan;Yang, Chang-Yeol;Kim, Dong-Soon
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.10 no.4
    • /
    • pp.158-166
    • /
    • 2008
  • The pumpkin fruit fly, Bactrocera depressa (Tephritidae: Diptera), is one of the most important pests in Cucurbitaceae plants. This study was conducted to investigate the basic ecology of B. depressa, and to develop a forecasting model for predicting the time of adult emergence in early season. In green pumpkin producing farms, the oviposition punctures caused by the oviposition of B. depressa occurred first between mid- and late July, peaked in late August, and then decreased in mid-September followed by disappearance of the symptoms in late September, during which oviposition activity of B. depressa is considered active. In full-ripened pumpkin producing farms, damaged fruits abruptly increased from early Auguest, because the decay of pumpkins caused by larval development began from that time. B. depressa produced a mean oviposition puncture of 2.2 per fruit and total 28.8-29.8 eggs per fruit. Adult emergence from overwintering pupae, which was monitored using a ground emergence trap, was first observed between mid- and late May, and peaked during late May to early June. The development times from overwintering pupae to adult emergence decreased with increasing temperature: 59.0 days at $15^{\circ}C$, 39.3 days at $20^{\circ}C$, 25.8 days at$25^{\circ}C$ and 21.4 days at $30^{\circ}C$. The pupae did not develop to adult at $35^{\circ}C$. The lower developmental threshold temperature was calculated as $6.8^{\circ}C$ by linear regression. The thermal constant was 482.3 degree-days. The non-linear model of Gaussian equation well explained the relationship between the development rate and temperature. The Weibull function provided a good fit for the distribution of development times of overwintering pupae. The predicted date of 50% adult emergence by a degree-day model showed one day deviation from the observed actual date. Also, the output estimated by rate summation model, which was consisted of the developmental model and the Weibull function, well pursued the actual pattern of cumulative frequency curve of B. depressa adult emergence. Consequently, it is expected that the present results could be used to establish the management strategy of B. depressa.

Effects of Planting Density and Tiller Removal Growth and Yield of Sweet Corn Hybrids (재식밀도와 얼자제거가 단 옥수수의 생육 및 수량에 미치는 영향)

  • Keun Yong, Park;Young Kil, Kang;Seung Ue, Park;Hyeon Gui, Moon
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.34 no.2
    • /
    • pp.192-197
    • /
    • 1989
  • Two sweet corn hybrids, 'Tanok l' and 'Golden Cross Bantam 70 (GCB 70)' were grown at five plant densities, of 4, 167. 5,556, 6,667. 8, 333, and 11, 111 plants per 10 ares, with or without tiller removal, to determine effects of tiller removal on growth and yield of sweet corn hybrids at various plant densities. Tillers were pulled when less than 15 cm tall. The number of tillers per plant linearly decreased as plant density increased. The two hybrids had similar plant height, ear length and diameter, ear weight and the number of ears per plant and 10 ares. Tanok 1 lodged approximately 20% at above 8,333 plants per 10 ares, while GCB 70 did not lodge at all, at any plant density. Tanok 1 had higher leaf area index (LAI), ear and stover yields than GCB 70. Except for root lodging and LAI, hybrid x plant density interaction was not significant at 5% probability level. Plant density did not affect silking data. Increasing plant density linearly increased plant height, LAI, and stover yield, but linearly decreased ear length, ear weight, and the number of ears per plant. Increase in LAI was greater in Tanok 1 than in GCB 70, with increasing plant density. The relationships between the number of ears and ear yield per 10 ares and plant density were Quadratic. The optimum plant density was estimated to be approximately 6500 plants per 10 ares, using the equation based on ear yield. Except for ear height and LA I, hybrid x tiller removal and plant density x tiller removal interactions were not significant. Hybrid x plant density x tiller removal interaction was not significant for any characters. When averaged over hybrids and plant densities, tiller removal reduced plant height and ear and stover yields by about 3, 10, and 16%, respectively, but did not significantly affect silking date, root lodging, ear length and diameter and the number of ears per plant and per 10 ares. The results indicate that the optimum plant density is approximately 6500 plants per 10 ares, regardless of tiller removal and tillers are not to be removed at any plant density.

  • PDF

Effects of Different Nitrogen Levels and Planting Densities on the Quality and Yield of the Black Rice Cultivar 'Shinnongheugchal' (재식밀도 및 시비량 차이가 신농흑찰 품질 및 수량에 미치는 영향)

  • Lee, In-Sok;Lee, Deok-Ryeol;Cho, Seung-Hyun;Lee, Song-Yi;Kim, Kab-Cheol;Lee, Ki-Kwon;Song, Young-Ju
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.61 no.2
    • /
    • pp.79-86
    • /
    • 2016
  • The late-maturing black rice cultivar Shinnongheugchal from Jeollabuk-do Agricultural Research and Extension Service was used as the plant material for estimating growth characters, quality and yield from the vegetation period to harvest age. This study was performed to select an optimum combination of nitrogen level and planting density for the maximum yield of Shinnongheugchal. The plant height, number of tillers, and SPAD index were higher when the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level was used at 30 days after transplanting. The heading date for the combination of 70 hills per $3.3m^2$ and 15 kg/10 a nitrogen level, and 80 hills per $3.3m^2$ and 15 kg/10 a nitrogen level was August 22. The heading date for the other combinations was August 21. The combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level yielded the highest number of tillers at 40 days after flowering. Even though the lodging index was increased with increasing nitrogen levels, field lodging did not occur until harvest time. Seed nitrogen concentration in the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level showed a significant difference when compared with the other combinations. The black rice yield varied significantly, and the highest yield was observed in the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level. The yield was significantly correlated with seed nitrogen concentration. The maximum yield was estimated to be 14.67 kg/10 a nitrogen level by using the regression equation. On average, the coloring degree of the black rice was higher at planting density of 70 hills per $3.3m^2$ than at 80 hills per $3.3m^2$. The highest yield of perfect black rice was obtained using the combination of 70 hills per $3.3m^2$ and 13 kg/10 a nitrogen level. Our findings demonstrate that a nitrogen level of 13-14 kg/10 a can be used to obtain the maximum yield from Shinnongheugchal with yield, cyanidin 3-glucoside content, and perfect black rice yield as the standard.

Least-Square Fitting of Intrinsic and Scattering Q Parameters (최소자승법(最小自乘法)에 의(衣)한 고유(固有) Q와 산란(散亂) Q의 측정(測定))

  • Kang, Ik Bum;McMechan, George A.;Min, Kyung Duck
    • Economic and Environmental Geology
    • /
    • v.27 no.6
    • /
    • pp.557-561
    • /
    • 1994
  • Q estimates are made by direct measurements of energy loss per cycle from primary P and S waves, as a function of frequency. Assuming that intrinsic Q is frequency independent and scattering Q is frequency dependent over the frequencies of interest, the relative contributions of each, to a total observed Q, may be estimated. Test examples are produced by computing viscoelastic synthetic seismograms using a pseudo spectral solution with inclusion of relaxation mechanisms (for intrinsic Q) and a fractal distribution of scatterers (for scattering Q). The composite theory implies that when the total Q for S-waves is smaller than that for P-waves (the usual situation), intrinsic Q is dominating; when it is larger, scattering Q is dominating. In the inverse problem, performed by a global least squares search, intrinsic $Q_p$ and $Q_s$ estimates are reliable and unique when their absolute values are sufficiently low that their effects are measurable in the data. Large $Q_p$ and $Q_s$ have no measurable effect and hence are not resolvable. Standard deviation of velocity $({\sigma})$ and scatterer size (A) are less unique as they exhibit a tradeoff as predicted by Blair's equation. For the P-waves, intrinsic and scattering contributions are of approximately the same importance, for S-waves, the intrinsic contributions dominate.

  • PDF

Evaluation of MODIS-derived Evapotranspiration at the Flux Tower Sites in East Asia (동아시아 지역의 플럭스 타워 관측지에 대한 MODIS 위성영상 기반의 증발산 평가)

  • Jeong, Seung-Taek;Jang, Keun-Chang;Kang, Sin-Kyu;Kim, Joon;Kondo, Hiroaki;Gamo, Minoru;Asanuma, Jun;Saigusa, Nobuko;Wang, Shaoqiang;Han, Shijie
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.11 no.4
    • /
    • pp.174-184
    • /
    • 2009
  • Evapotranspiration (ET) is one of the major hydrologic processes in terrestrial ecosystems. A reliable estimation of spatially representavtive ET is necessary for deriving regional water budget, primary productivity of vegetation, and feedbacks of land surface to regional climate. Moderate resolution imaging spectroradiometer (MODIS) provides an opportunity to monitor ET for wide area at daily time scale. In this study, we applied a MODIS-based ET algorithm and tested its reliability for nine flux tower sites in East Asia. This is a stand-alone MODIS algorithm based on the Penman-Monteith equation and uses input data derived from MODIS. Instantaneous ET was estimated and scaled up to daily ET. For six flux sites, the MODIS-derived instantaneous ET showed a good agreement with the measured data ($r^2=0.38$ to 0.73, ME = -44 to $+31W\;m^{-2}$, RMSE =48 to $111W\;m^{-2}$). However, for the other three sites, a poor agreement was observed. The predictability of MODIS ET was improved when the up-scaled daily ET was used ($r^2\;=\;0.48$ to 0.89, ME = -0.7 to $-0.6\;mm\;day^{-1}$, $RMSE=\;0.5{\sim}1.1\;mm\;day^{-1}$). Errors in the canopy conductance were identified as a primary factor of uncertainty in MODIS-derived ET and hence, a more reliable estimation of canopy conductance is necessary to increase the accuracy of MODIS ET.

Establishment of Economic Threshold by Evaluation of Yield Component and Yield Damages Caused by Rice Leaf Blast (Magnaporthe grisea) (벼 잎도열병 피해해석에 의한 경제적 방제수준 설정)

  • Yeh, Wan-Hee;Park, Hong-Hyun;Nam, Young-Ju;Kim, Seol-A;Lee, Jeong-Hee;Shim, Hong-Sik;Kim, Yong-Ki;Lee, Yong-Hwan;Lee, Yeong-Hoon
    • Research in Plant Disease
    • /
    • v.14 no.1
    • /
    • pp.21-25
    • /
    • 2008
  • This study was conducted to decide disease incidence level of rice leaf blast required for reasonable fungicide application in paddy field. We induced the disease development by inoculating rice blast pathogens on rice seedlings (Jinmibyeo) in the greenhouse and transplanting the infected seedlings in the field two weeks after rice plants were transplanted. We scored the disease incidence, grouped and marked according to degree of percentage of diseased leaf area at maximum stage of disease development. The percent diseased leaf area (PDLA) had negative correlations with panicle number per hill, ripened grain (%), and total yield; their correlation coefficients (r), $-0.97^{**}$, $-1.00^{**}$ and $-0.96^{**}$, respectively. However, it had positive correlations with spikelets per panicle and thousand grain weight; their correlation coefficients (r), $0.98^{**}$ and $0.98^{**}$, respectively. Gain threshold (GT) calculated based on control cost and market price was estimated to be 8.35. Economic injury level (EIL) obtained based on GT and coefficient of damage of regression equation between disease incidence and the different yield components; panicle number per hill, spikelets per panical, ripened grain(%), thousand grain weight and yield were 41.8, 9.7, 19.1, 291.1 and 3.4%, respectively. Economic threshold (ET) for yield was 2.7% ($3.4%(EIL){\times}0.8$) on PDLA. These results suggest that application of fungicide is necessary when two under leaves are almost covered with lesions or contained more than twenty large lesions under leaves at maximum tillering stage.

Model Equations to Estimate the Soil Water Characteristics Curve Using Scaling Factor (Scaling Factor를 이용한 토양수분특성곡선 추정모형)

  • Eom, Ki-Cheol;Song, Kwan-Cheol;Ryu, Kwan-Shig;Sonn, Yeon-Kyu;Lee, Sang-Eun
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.28 no.3
    • /
    • pp.227-232
    • /
    • 1995
  • The model equations including scaling factors to estimate the soil water characteristics curve(SWCC) without direct measurement of soil water tension were developed. Scaling were applied to a data set of soil water content, soil water tension, particle size distribution, and OM contents of the 134 soil samples with the 10 soil textural classes. The capability of the model equations was tested on another 205 soil samples. The parameter, ${\theta}^*$, of soil water contents was used by scale transformation as follows : ${\theta}^*=[{\theta}i-{\theta}(1.5MPa)]$/$[{\theta}(10KPa)-{\theta}(1.5MPa)]$ Using ${\theta}^*$ a model equation to estimate SWCC, which was applicable to all textural classes, was developed as follows: $H(0.1MPa)=0.13{\cdot}({\theta}^*)^{-2.04}$. Other model equations to estimate the water content at the soil water tension of 10KPa [${\theta}(10KPa)$] and 1.5MPa [${\theta}(1.5MPa)$], which are required to ${\theta}^*$ were developed by using scale factors of sand(S) and silt(Si) content and organic matter content(OM) as foilows : ${\theta}(10KPa)=26.80-3.99ln[S]+2.36{\sqrt{[Si]}}+2.88[OM]$ ($R=0.81^{**}$) ${\theta}(1.5KPa)=15.75-2.86ln[S]+0.55{\sqrt{[Si]}}+0.70[OM]$ ($R=0.76^{**}$) The measured and estimated values of ${\theta}(1/30MPa)$ on the 205 soil samples were highly correlated on 1 : 1 corresponding line with $R=0.85^{**}$.

  • PDF

Chemical Characteristics of Fog at a Forested Area in Jinju (진주시 주변 산림에서 안개의 화학적 특성)

  • Lee, Chong-Kyu
    • Journal of agriculture & life science
    • /
    • v.46 no.6
    • /
    • pp.51-57
    • /
    • 2012
  • This study was carried out to analyze chemical compositions of the fog water of a forest area, Jinju and to provide basic information for establishing measures on the acid fog water of forest area. The results are as follows: The pH of fog water was 4.3 in 2010, whereas the pH in 2011 was 4.0. The electrical conductivity of the fog water was $477.2{\mu}s$ in 2010, and $562.7{\mu}s$ in 2011. Among the anions, the concentration of $NO^{3-}$ was the highest, which recorded 267.1 mg/L in spring season and 279.1 mg/L in summer season, followed by $SO{_4}^{2-}$ at the concentration of 177.2 mg/L in spring season and 198.6mg/L in summer season. In autumn and winter, the concentration of $NO^{3-}$ was highest as 217.7 mg/L and 237.9 mg/L, respectively and followed by $SO{_4}^{2-}$, which concentration was 164.2 mg/L in autumn season and 190.1 mg/L in winter season (p<0.05). Among the cations, the concentration of $Ca^{2+}$ was 221.3 mg/L in spring and 233.7mg/L in summer, followed by $Na^+$ at 125.1 mg/L in spring season and 131.7 mg/L in summer In autumn and winter, the concentration of $Ca^{2+}$ was highest at 196.8 mg/L and 198.8 mg/L, followed by $Na^+$ at the concentration of 97.1 mg/L in autumn and 117.2 mg/L in winter (p<0.05). The pH of the fog rain that causes acid mist showed the correlation with $Ca^{++}$ (1% of level), $EC(r=-0.9861^{**})$, $NO^{3-}$ ($r=-0.9677^{**}$), and $SO{_4}^{2-}$ ($r=-0.9510^{**}$). The regression equation on the factors affecting the generation of acidic fog rain was estimated to be a $Y(pH)=6.4627+0.9723X_2(EC)+0.9364X_4(NO_3{^-})+0.9044X_5(SO{_4}^{2-})+0.8049X_{10}(Ca^{2+})+0.6709X_8(K^+)\;(r^2=0.8787)$.