• Journal of Environmental Science International
• /
• v.17 no.11
• /
• pp.1281-1293
• /
• 2008

This study aims at the estimation of dam failure time and dam failure scenario analysis of and applied to Yeoncheon Dam which was collapsed August 1st 1999, using HEC-HMS, DAMBRK-FLDWAV simulation model. As the result of the rainfall-runoff simulation, the lancet flood amount of the Yeoncheon Dam site was $10,324\;m^3/sec$ and the total outflow was $1,263.90\;million\;m^3$. For the dam failure time estimation, 13 scenarios were assumed including dam failure duration time and starting time, which reviewed to the runoff results. The simulation time was established with 30 minutes intervals between one o'clock to 4 o'clock in the morning on August 1, 1999 for the setup standard for each case of the dam failure time estimation, considering the arrival time of the flood, when the actually measured water level was sharply raising at Jeongok station area of the Yeoncheon Dam downstream, As results, dam failure arrival time could be estimated at 02:45 a.m., August 1st 1999 and duration time could be also 30 minutes. Those results and procedure could suggest how and when dam failure occurs and analyzes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.138-142
• /
• 2006

Time Difference of Arrival (TDOA) algorithm was applied to sound source positioning. Using measured microphones signal, difference of distance from source to sensors were estimated by TDOA and speed of sound, and taken by navigational measurements. And iteration procedures were induced to find the actual source location. For the case of stationary and moving sound source, validation test were performed in the anechoic room. In the stationary case, the error of positioning is less then 1.3% in length scale, and it could be seen proper filtering processes were required in the application of moving sound source.

• International Journal of Advanced Culture Technology
• /
• v.2 no.2
• /
• pp.15-18
• /
• 2014

This paper presents a sensor location decision making method respect to Container-Grown Seedlings in view of precision agriculture (PA) when sensors involved in tree container measure received signal strength (RSS) or time-of-arrival (TOA) between themselves and neighboring sensors. A small fraction of sensors in the container-grown seedlings system have a known location, whereas the remaining locations must be estimated. We derive Rao-Cramer bounds and maximum-likelihood estimators under Gaussian and log-normal models for the TOA and RSS measurements, respectively.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.17-20
• /
• 1998

The purpose of this paper is to develop a port simulation program for Inchon Port. The arrival and departure data from Inchon Port are analyzed, several probability density functions for the interval time and service time are estimated, and the berthing rules are constructed based on experts experiences. The port simulation program is written in visual basic considering the interarrival p.d.f., service rate p.d.f., berthing rules, and dual-dock system, and is used to analyze the effects of the changes in ship arrival rate and service rate upon the demurrage. It is expected that we can use the simulation results in order to prepare proper service level and to evaluate the appropriate investment strategy to be planned.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.4
• /
• pp.44-52
• /
• 2016

The departure flow management is the planning tool to optimize the schedule of the departure aircraft and allows them to join smoothly into the overhead traffic flow. To that end, the arrival time prediction to the merge point for the cruising aircraft is necessary to determined. This paper proposes a trajectory prediction model for the cruising aircraft based on the machine learning approach. The proposed method includes the trajectory vectored from the procedural route and is applied to the historical data to evaluate the prediction performances.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.17-27
• /
• 2003

In general, an airport access system has influenced on airport terminal operation. The congestion and delay in service facilities at an airport are definitely depended on the patterns of passenger arrival behavior and time spent in a terminal. Therefore, it is necessary to analyze the passenger arrival behavior at an airport to improve the operations at passenger terminal. Passenger arrival patterns to an airport are mainly depended on factors such as the length of access time. reliability of access time. and provision of transport modes, etc. The focus of this paper is to estimate the relationship between the length of access time and passenger's total time spent to board aeroplane. For this, passenger surveys were conducted at the Gimpo International Airport for a large airport and Sacheon Airport for a small size airport. The mathematical relationship between arrival time at an airport prior to the scheduled time of departure(STD) and access time spent was then estimated. It is considered that the results of this study can be used to reduce congestion and delays, thereby to improve the efficiency of the passenger services at the airports.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.2
• /
• pp.111-122
• /
• 2012

Capacity planning plays an important role not only for master production plan but also for facility or layout design in shipbuilding. Product work breakdown structure, attributes of production resources, and production method or process data are associated in order to make the discrete event simulation model of shipyard layout plan. The production amount of each process and the process time is assumed to be stochastic. Based on the stochastic discrete event simulation model, the production capacity of each facility in shipyard is estimated. The stochastic model of product arrival time, process time and transferring time is introduced for each process. Also, the production capacity is estimated for the assumed master production schedule.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.268-276
• /
• 2002

This paper introduces the high-resolution channel estimation technique which are used to estimate the first arrival multipath delay component. The proposed technique yields the precise estimate of the first time arrival which is directly related to the performance of TDOA-based position location. The proposed technique utilizes the transformed auto-correlation function of received common pilot signal in frequency domain, its samples compose the hermitian Toeplitz matrix at sequel. Then the time delay components could be estimated with precision by the analysis of eigen-structure of corresponding matrix. In this paper, obeying the modified CODIT model, the performance of the PR-IPDL(Pseudo Random-Idle Period Downlink) and TA-IPDL(Time Aligned-Idle Period Downlink considered as 3GPP position location technique will be exploited systematically through the computer simulations with applying the proposed technique.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.10-10
• /
• 2002

This paper introduces the high-resolution channel estimation technique which are used to estimate the first arrival multipath delay component. The proposed technique yields the precise estimate of the first time arrival which is directly related to the performance of TDOA-based position location. The proposed technique utilizes the transformed auto-correlation function of received common pilot signal in frequency domain, its samples compose the hermitian Toeplitz matrix at sequel. Then the time delay components could be estimated with precision by the analysis of eigen-structure of corresponding matrix. In this paper, obeying the modified CODIT model, the performance of the PR-IPDL(Pseudo Random-Idle Period Downlink) and TA-IPDL(Time Aligned-Idle Period Downlink considered as 3GPP position location technique will be exploited systematically through the computer simulations with applying the proposed technique.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.330-335
• /
• 2010

In order to estimate the confidence level of the velocity distribution shown in a velocity image reconstructed from a travel-time tomography, the ray coverage and the inversion characteristics of the system matrix were investigated. The targets of the analysis is the first arrival travel-time, the raypath information, and the resulting velocity model. The ray coverage, degree of ray and model coupling, was estimated by the number of rays and total ray length in a velocity grid, and information regarding the resolution and uncertainties involved in the reconstructed velocity model was derived from the results of the SVD analysis of the system matrix that relates the data space (first arrival travel times) to the model space (velocity distribution in tomogram).