• 한국수학사학회지
• /
• 제31권6호
• /
• pp.273-289
• /
• 2018

The KaiFangFa開方法 of traditional mathematics was completed in ${\ll}$JiuZhang SuanShu九章算術${\gg}$ originally, and further organized in Song宋 $Yu{\acute{a}}n$元 dinasities. The former is the ShiSuoKaiFangFa釋鎖開方法 using the coefficients of the polynomial expansion, and the latter is the ZengChengKaiFangFa增乘開方法 obtaining the solution only by some mechanical numerical manipulations. ${\ll}$SanHak JeongEui算學正義${\gg}$ basically used the latter and improved the estimate-value array by referring to the written-calculation in ${\ll}$ShuLi JingYun數理精蘊${\gg}$. As a result, ZengChengKaiFangFa was more refined so that the KaiFangFa algorithm is more consistent.

• 한국정보전자통신기술학회논문지
• /
• 제8권4호
• /
• pp.275-280
• /
• 2015

본 논문에서는 수정된 MUSIC 도래 방향 추정 알고리즘에 대해서 연구 하였다. 수정된 MUSIC 알고리즘은 특이 값 행렬과 베이즈 방법을 적용시켜 공 분산행렬을 최적화 시키고 가중치를 갱신하여 원하는 신호를 추정하는 방법이다. 그리고 MUSCI 알고리즘의 신호 부 공간 방법을 적용시켜 원하는 신호를 정확히 추정하였다. 무상관 신호가 수신 시스템에 입사하면 기존의 MUSIC알고리즘으로 원하는 신호를 추정 할 수 있다. 그러나 일반적으로 수신 시스템에는 상관성 신호가 입사하므로 기존의 MUSIC알고리즘으로 원하는 도래 방향 신호를 추정할 수 있는 능력이 현저히 떨어진다. 모의실험을 통해서 상관성 신호인 경우에 본 연구에서 제안된 MUSIC알고리즘과 기존의 MUSIC알고리즘의 성능을 비교 분석한다.

• 한국음향학회지
• /
• 제38권6호
• /
• pp.630-636
• /
• 2019

수동측거소나는 잠수함 플랫폼의 좌/우현에 각각 3개의 부배열로 구성된 수동소나의 한 종류로서 표적을 탐지하고 방위와 거리를 산출하는 특성을 갖는다. 방위와 거리 산출에는 물리적인 부배열 위치로 인하여 발생되는 시간지연과 삼각측량 기법이 활용된다. 이러한 기법에는 부배열의 정확한 위치정보가 요구되며 부배열의 위치정보가 부정확할 경우 방위와 거리정확도 성능이 저하되는 한계가 있다. 특히 하나의 시간지연을 사용하는 방위보다 두 개의 시간지연 값을 사용하는 거리 정확도 성능에 미치는 영향이 더 크다. 이를 개선하기 위하여 부배열의 위치 오차 추정 및 오차보상에 대한 연구가 필요하다. 본 논문에서는 최적화 탐색 기법인 유전자 알고리즘을 바탕으로 부배열 위치오차를 추정하며, 위치오차로 인한 시간지연 오차 값을 보상하여 거리정확도 성능 개선 방법을 제시하고자 한다. 또한 해상시험 데이터를 이용하여 제시한 알고리즘과 성능을 검증하고자 한다.

• 한국정보전자통신기술학회논문지
• /
• 제8권5호
• /
• pp.400-404
• /
• 2015

본 논문에서는 공간에서 원하는 신호를 추정하기 위해서 도래방향 MUSIC 공간 스펙트럼 알고리즘에 대해서 연구한다. 본 연구에서 제안하는 MUSIC 공간 스펙트럼 알고리즘은 모델 오차와 베이즈 정리를 적용한 방법으로 목표물의 위치를 정확히 추정한다. 적응 배열 안테나를 사용한 수신기의 배열 응답 벡터는 베이즈 방법을 이용하고 모델 오차방법으로 수신 신호의 가중치를 갱신하여 원하는 목표물의 도래 방향을 정확히 추정한다. 본 연구에서 원하는 도래방향 목표물의 신호 추정은 입사 신호의 간섭과 잡음을 제거한 후 배열 응답 벡터를 신호 공분산 행렬의 가중치에 적용한다. 모의실험을 통해서 본 논문에서 제안한 방법과 기존의 도래방향 알고리즘을 비교 분석한다.

• 자원환경지질
• /
• 제33권5호
• /
• pp.417-424
• /
• 2000

We applied SP monitoring and resistivity surveys using the pole-pole electrode array to seawater leakage problems in the Youngsan estuary dam and the Eoeun embankment to estimate and detect the zone of seawater leakage. The embankment is generally affected by tidal variation and has low resistivity characteristics due to the high saturation of seawater. For this reason, SP monitoring and the pole-pole array resistivity surveys, which are relatively more effective to the conductive media, were carried out to delineate the leakage zones of sea water through the embankment. We checked out electrical conductivity (EC) and temperature variations along the inner part of Youngsan estuary dam to detect the zone of seawater leakage and found that the measured EC value agreed to that of seawater in the leakage zone and the temperature was lower than that of the vicinity of leakage zone. SP monitoring results were coincided with tidal variations at each embankment. At the leakage zones in the Youngsan estuary dam and the Eoeun embankment, SP anomalies are in the range of -60~-85 mV and -20~-50 mV, respectively, and true resistivity values obtained by 2-D inversion are 3~15 ohm-m and below 0.3 ohm-m, respectively. Both SP monitoring and the pole-pole array resistivity method are found to be quite effective for investigation of seawater leakage zones in the embankment.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.28-34
• /
• 2002

The b-value in the magnitude-frequency relationship logN(m) = $\alpha$ - bmwhere N(m) is the number of earthquakes exceeding magnitude m, is important seismicity parameter In hazard analysis. Estimation of the b-value for earthquake data observed on KSRS array network is done employing the maximum likelihood technique. Assuming the whole Korea Peninsula as a single seismic source area, the b-value is computed at 0.9. The estimation for KMA earthquake data is also similar to that. Since estimate is a function of minimum magnitude, we can inspect the completeness of earthquake catalog in the fitting process of b-value. KSRS and KMA data lists are probably incomplete for magnitudes less than 2.0 and 3.0, respectively. Examples from probabilistic seismic hazard assessment calculated for a range of b-value show that the small change of b-value has seriously effect on the prediction of ground motion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.617-621
• /
• 2001

This paper presents a maximum power point tracking algorithm for Photovoltaic array using only instantaneous output current information. The conventional Hill climbing method of peak power tracking has a disadvantage of oscillations about the maximum power point. To overcome this problem, we have developed a algorithm, that will estimate the duty ratio corresponding to maximum power operation of solar cell. The estimation of the optimal duty ratio involves, finding the duty ratio at which integral value of output current is maximum. For the estimation, we have used the well know Lagrange's interpolation method. This method can track maximum power point quickly even for changing solar insolations and avoids oscillations after reaching the maximum power point.

• Journal of Power Electronics
• /
• 제2권3호
• /
• pp.155-161
• /
• 2002

This paper presents a maximum power point tracking algorithm for Photovoltaic array using only instantaneous output current information. The conventional Hill climbing method of peak power tracking has a disadvantage of oscillations about the maximum power point. To overcome this problem, we have developed an algorithm that will estimate the duty ratio corresponding to maximum power operation of solar cell. The estimation of the optimal duty ratio involves, finding the duty ratio at which integral value of output current is maximum. For the estimation, we have used the well know Lagrange's interpolation method. This method can track maximum power point quickly even for changing solar isolation and avoids oscillations after reaching the maximum power point.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.713-717
• /
• 2014

This paper presents a beamforming technique for locating impulsive sound source. The conventional frequency-domain beamformer is advantageous for localizing noise sources for a certain frequency band of concern, but the existence of many frequency components in the wide-band spectrum of impulsive noise makes the beamforming image less clear. In contrast to a frequency-domain beamformer, it has been reported that a time-domain beamformer can be better suited for transient signals. Although both frequency- and time-domain beamformers produce the same result for the beamforming power, which is defined as the RMS value of its output, we can use alternative directional estimators such as the peak value and crest factor to enhance the performance of a time-domain beamformer. In this study, the performance of three different directional estimators, the peak, crest factor and RMS output values, are investigated and compared with the incoherent interfering noise embedded in multiple microphone signals. The proposed formula is verified via experiments in an anechoic chamber using a uniformly spaced linear array. The results show that the peak estimation of beamformer output determines the location with better spatial resolution and a lower side lobe level than crest factor and RMS estimation in noise free condition, but it is possible to accurately estimate the direction of the impulsive sound source using crest factor estimation in noisy environment with stationary interfering noise.

• 기술혁신학회지
• /
• 제7권3호
• /
• pp.533-554
• /
• 2004

Real option valuation considers the managerial flexibility to make ongoing decisions regarding implementation of investment projects and deployment of real assets. The appeal of the framework is natural given the high degree of uncertainty that firms face in their technology investment decisions. This paper suggests an algorithm for estimating volatility of logarithmic cash flow returns of real asset based on Monte Carlo simulation. This research uses a binomial model to obtain point estimate of real option value with embedded expansion option case and provides also an array of numerical results to show the interval estimation of option value using Monte Carlo simulation.